2.- 电子学

电子学是专注于电子行为的物理学分支。在工程中，电子学是研究和开发电子电路的部分，以使在其中循环的电子具有应用规格所要求的行为.

电子学是整个20世纪最发达的学科之一，从电源的应用非常有限，到对社会产生了巨大的影响。要了解这种巨大的影响，一些关键的电子应用的例子是传感器和仪表各种物理量，如压力水平、流量水平和温度测量，使用电子放大器和滤波器。集成电路、微处理器和个人计算机的发展，MOSFET、JFET、BJT、IGBT等不同技术的晶体管的发展。

电子学应用几乎是无穷无尽的，每年都有新的贡献在改进和增加。根据电子线路的应用，可区分为以下几组。模拟电子技术和数字电子技术根据是采用二进制还是模拟信号。电力电子取决于是否使用高电电流和电电压，电子仪器取决于是否用于对物理量进行电子测量等。

电子学的未来的重点是电子元件的小型化，提高其效率和速度。在这项工作中，发现革命性的新材料，如石墨烯或硅烯，是关键的重要性。

查看产品

相关资料

电子学 SUBCATEGORIES

2.1.- 电源,测量设备和配件

电子学实验设备是指在电子学实践环节中进行实验所需的一套仪器。设备的特点取决于所要配备的实验室的理论水平，无论是技术研究所、大学还是公司的研发部门。电子实验室最常用的设备，一方面是电学测量仪器，有万用表或多用表等设备，根据型号的不同，可以实现电流表、电压表、电容表、电阻表等多种测量功能。另一方面，电子实验室有分析信号的仪器，有示波器、频谱分析仪等电子设备。最后，电子实验室有电子器件来产生信号，可以是电源产生的功率信号，也可以是函数发生器等变频模拟信号。未来的实验室仪器仪表旨在将所有的测量和信号产生设备（电压表、电流表、频谱分析仪、函数发生器等）统一在一个多功能设备中，并与计算机连接（这种连...

看

2.2.- 电路组件套件

设备的电子开发阶段是指为了获得符合要求规格的产品而进行的一系列阶段。任何电子设备的开发最具有特色的阶段是：确定设备规格，设计设备所需的不同电子电路（电源电路、控制电路、电源电路、信号滤波电路、振荡器电路、电源电路与信号电路之间的隔离电路、模拟信号调理电路、放大器电路、编码器或解码器电路等。)，计算各电路所带元件的特性，模拟仪器电子电路的运行，对不同的电路分别进行测试，研制产品的样机，最后制造出最终产品。电子电路的测试开发和原型设计阶段是电子电路设计或再设计的关键步骤之一。在过去，这些测试是通过在原始PCB上组装和焊接元件来进行的，但由于元件的标准化以及带孔的测试板或Protoboard的...

看

2.3.- 理论-实用基础

电子学基础是旨在为学生分析和理解最常见的电子电路的一般工作原理和构成电子电路的电子元件的个别功能打下坚实基础的知识体系。在电子学这样的专业学科中，掌握良好的理论基础，是后续设计和开发复杂电子系统的必要步骤。由于电子学也是工科的一个分支，很多理论概念都有直接的实际应用，如果在理论课上结合相关的实际例子进行教学，就会大大促进电子学学生对概念的吸收。电子学基础涵盖的内容非常广泛，其中电子电路的分析不能错过（利用欧姆定律、基尔霍夫定律、Thevenin定理、叠加定理、将分析的电路转化为更简单的等效电路等方程和程序）、基本元件的研究（电阻、电感、电容、不同技术的晶体管、二极管、晶闸管、逻辑门等）。...

看

2.4.- 工业电子

工业电子学是电子工程学的一个分支，主要研究工业级电子系统，即工业中使用的电子设备。电力电子学是工业电子学最重要的分支之一，它涉及控制和调节高电压和电流的电子应用开发。与所有工程分支一样，工业电子技术的发展也以该领域的科学进步为标志。电力电子技术最重要的发展是以下半导体元件：可控硅整流器、GTO 晶闸管，尤其是 IGBT...

看

2.5.- 汽车电子

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...

看

2.1.- 电源,测量设备和配件 2.2.- 电路组件套件 2.3.- 理论-实用基础 2.4.- 工业电子 2.5.- 汽车电子

电子学 UNITS

Showing 49-72 of 122 item(s)

配件 M-KITS

Available

2.2.- 电路组件套件

M3/KIT

半导体套件 I

配件 M-KITS

With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...

配件 M-KITS

Available

2.2.- 电路组件套件

M4/KIT

半导体套件 II

配件 M-KITS

With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".

配件 M-KITS

Available

2.2.- 电路组件套件

M5/KIT

电源套件

配件 M-KITS

With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.

配件 M-KITS

Available

2.2.- 电路组件套件

M6/KIT

振荡器套件

配件 M-KITS

With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.

配件 M-KITS

Available

2.2.- 电路组件套件

M7/KIT

运放套件

配件 M-KITS

With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.

配件 M-KITS

Available

2.2.- 电路组件套件

M8/KIT

滤波器套件

配件 M-KITS

With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...

配件 M-KITS

Available

2.2.- 电路组件套件

M9/KIT

功率电子学套件

配件 M-KITS

With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.

DIGITAL SYSTEMS AND CONVERTERS KIT - M10/KIT

配件 M-KITS

Available

2.2.- 电路组件套件

M10/KIT

系统和数字转换器套件

配件 M-KITS

With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.

DIGITAL ELECTRONIC FUNDAMENTALS KIT - M11/KIT

配件 M-KITS

Available

2.2.- 电路组件套件

M11/KIT

数字电子基础套件

配件 M-KITS

With Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON, numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can be studied.

BASIC COMBINATIONAL CIRCUITS KIT - M12/KIT

配件 M-KITS

Available

2.2.- 电路组件套件

M12/KIT

基本组合电路套件

配件 M-KITS

With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.

配件 M-KITS

Available

2.2.- 电路组件套件

M13/KIT

基本时序电路套件

配件 M-KITS

With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.

配件 M-KITS

Available

2.2.- 电路组件套件

M14/KIT

光电子学套件

配件 M-KITS

With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.

配件 M-KITS

Available

2.2.- 电路组件套件

M16/KIT

电力网络套件

配件 M-KITS

With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.

配件 M-KITS

Available

2.2.- 电路组件套件

M18/KIT

三相电路套件

配件 M-KITS

The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.

COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA

CADDA

Available

14.2.1.3.- 数字电子

CADDA

计算机控制的A/D和D/A转换器单元（PC）

The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- 数字电子

TDS

计算机控制的数字信号处理的研究教学设备

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC

Available

14.2.2.- 仪表与控制

SPC

计算机控制称重系统

The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- 仪表与控制

SCSP

压力传感器校准系统

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS

Available

6.1.2.1.- 传感器和电子仪器

传感器学习模块系统

The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...

COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC

配件 BS

Available

6.1.2.1.- 传感器和电子仪器

BSPC

基础单元BS，通过计算机(PC)控制

配件 BS

The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...

配件 BS

Available

6.1.2.1.- 传感器和电子仪器

BSUB

基础单元BS

配件 BS

The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...

VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1

配件 BS

Available

6.1.2.1.- 传感器和电子仪器

BS1

振动和/或变形测试模块

配件 BS

Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...

配件 BS

Available

6.1.2.1.- 传感器和电子仪器

BS2

温度测试模块

配件 BS

The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....

如需更多信息，请联系我们