NEW Basic Mechanics course
Lesen Sie mehr7.1.- MASCHINENBAU
Maschinenbau ist die Anwendung von Physik auf die Elemente, die uns umgeben, um bestehende mechanische Geräte zu verbessern oder neue zu schaffen. Da sie auf physikalischen Prinzipien basiert, geht ihr Ursprung auf den Ursprung dieser Prinzipien zurück, und ihre Entwicklung ist eng mit den strongchritten in der Mechanik verbunden. Dennoch wurde sie erst mit der Erfindung der Dampfmaschine zu einer der Säulen der Entwicklung der Industrie.
Mehr sehenDie Industrielle Revolution des siebzehnten Jahrhunderts fand als Ergebnis der Schaffung dieser Vorrichtung statt. Von diesem Moment an begann mit den Beiträgen von Wissenschaftlern und Ingenieuren, die so wichtig waren wie Watt, Stephenson, Tesla oder Rankine, eine beispiellose Erneuerung sowohl des Konzepts als auch der Entwicklung neuer Maschinen.
Das Konzept der Industrie, wie es bis dahin bekannt war, änderte sich mit der Entwicklung dieser Maschinen. Massenproduktion wurde eingeführt, Maschinen Designs wurden verbessert und infolgedessen wurde die Bandbreite der Produktionsprozesse erhöht, was zu einer unvorstellbaren Vielfalt neuer Produkte führte, die an die Bedürfnisse der Gesellschaft angepasst waren.
Im Rahmen des Maschinenbaus sind folgende Studien- und Anwendungsbereiche zu erwähnen:
- Mechanismen.
- Strukturen.
- Dynamik.
- Vibrationen.
- Osschwingungen.
Gegenwärtig muss jede Industrie, von Lebensmittel bis Luft- und Raumfahrt, auf dem höchsten technologischen Niveau Innovation sein. Deshalb ist Forschung und Entwicklungvon neuen Geräten besonders wichtig, um immer auf dem neuesten Stand der Technologie zu sein und auf dem von der Industrie geforderten Niveau 4.0.
Siehe Produkte
Verwandte Materialien
MASCHINENBAU UNITS
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-3
Zubehör von
MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-4
Rolling Friction in Wheels
Zubehör von
MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-5
Elastohydrodynamic Lubrication
Zubehör von
MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-6
Friction Vibration
Zubehör von
MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MCD
Gerät für dünne Zylinder.
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MCF/A
Belt Friction Unit with Dynamometers
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
7.1.6.- STRUKTURMECHANIK
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
7.1.6.- STRUKTURMECHANIK
MFPG
Gerät für das Studium der Kräfte in einem Auslegerkran
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
7.1.6.- STRUKTURMECHANIK
MVS
Gerät für Hängebrücken.
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
7.1.6.- STRUKTURMECHANIK
MARP
Parabolischer- Bogen- Einheit
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
7.1.6.- STRUKTURMECHANIK
MART
Dreigelenkbogeneinheit
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
7.1.6.- STRUKTURMECHANIK
MFBS
Einheit zum Studieren der Kräfte in einer einfachen Sprossenstruktur
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
7.1.6.- STRUKTURMECHANIK
MFCS1
Einheit zum Studieren der Kräfte bei verschiedenen planaren Fachwerken
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...
7.1.6.- STRUKTURMECHANIK
MFCS2
Einheit zum Studieren der Kräfte in einem überbestimmten Fachwerk
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
7.1.6.- STRUKTURMECHANIK
MFCS3
Einheit zur Untersuchung der Verbiegung von Fachwerken
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
7.1.6.- STRUKTURMECHANIK
MFL
Biegegerät (zweiseitig befestigter Bogen).
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
7.1.6.- STRUKTURMECHANIK
MPO
Portalrahmen.
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
7.1.6.- STRUKTURMECHANIK
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
7.1.6.- STRUKTURMECHANIK
MEPE
Gerät zur Untersuchung einfacher Stabilitätsprobleme
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
7.1.6.- STRUKTURMECHANIK
MDLE
Gerät sum Studieren der Methoden zur Bestimmung des elastischen linie
The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...
7.1.6.- STRUKTURMECHANIK
SSM
Unit to Study Stress on a Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
7.1.6.- STRUKTURMECHANIK
MVV
Messgerät für Kragbalken.
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
7.3.2.1.- MECHANISCHE TESTS
MDB
Gerät für die Durchbiegung bei gekrümmten Balken.
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
7.3.2.1.- MECHANISCHE TESTS
MFV
Gerät zur Strahlenablenkung.
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
7.3.2.1.- MECHANISCHE TESTS
MFLT
Maschine zur Untersuchung des Knickens von Stäben
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
7.3.2.1.- MECHANISCHE TESTS
MEBM
Euler Buckling Modes Unit
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
7.3.2.1.- MECHANISCHE TESTS
MUP
Gerät zur Belastung von Strebebalken.
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
7.3.2.1.- MECHANISCHE TESTS
MMF
Messgerät für die Querkraft und das Biegemoment.
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...