NEW Basic Mechanics course
Lesen Sie mehr7.1.- MASCHINENBAU
Maschinenbau ist die Anwendung von Physik auf die Elemente, die uns umgeben, um bestehende mechanische Geräte zu verbessern oder neue zu schaffen. Da sie auf physikalischen Prinzipien basiert, geht ihr Ursprung auf den Ursprung dieser Prinzipien zurück, und ihre Entwicklung ist eng mit den strongchritten in der Mechanik verbunden. Dennoch wurde sie erst mit der Erfindung der Dampfmaschine zu einer der Säulen der Entwicklung der Industrie.
Mehr sehenDie Industrielle Revolution des siebzehnten Jahrhunderts fand als Ergebnis der Schaffung dieser Vorrichtung statt. Von diesem Moment an begann mit den Beiträgen von Wissenschaftlern und Ingenieuren, die so wichtig waren wie Watt, Stephenson, Tesla oder Rankine, eine beispiellose Erneuerung sowohl des Konzepts als auch der Entwicklung neuer Maschinen.
Das Konzept der Industrie, wie es bis dahin bekannt war, änderte sich mit der Entwicklung dieser Maschinen. Massenproduktion wurde eingeführt, Maschinen Designs wurden verbessert und infolgedessen wurde die Bandbreite der Produktionsprozesse erhöht, was zu einer unvorstellbaren Vielfalt neuer Produkte führte, die an die Bedürfnisse der Gesellschaft angepasst waren.
Im Rahmen des Maschinenbaus sind folgende Studien- und Anwendungsbereiche zu erwähnen:
- Mechanismen.
- Strukturen.
- Dynamik.
- Vibrationen.
- Osschwingungen.
Gegenwärtig muss jede Industrie, von Lebensmittel bis Luft- und Raumfahrt, auf dem höchsten technologischen Niveau Innovation sein. Deshalb ist Forschung und Entwicklungvon neuen Geräten besonders wichtig, um immer auf dem neuesten Stand der Technologie zu sein und auf dem von der Industrie geforderten Niveau 4.0.
Siehe Produkte
Verwandte Materialien
MASCHINENBAU UNITS
14.1.2.2.- VERZAHNUNG
MCDA
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
14.1.2.2.- VERZAHNUNG
MGTA
Montageausrüstung für Zahnradsätze
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
14.1.2.2.- VERZAHNUNG
MGE
Gerät zur Zahnraderzeugung.
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
14.1.2.2.- VERZAHNUNG
MEE
Verzahnte Hebemaschine.
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
7.1.2.2.- VERZAHNUNG
MESE-T
Geared Study
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
7.1.2.2.- VERZAHNUNG
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
7.1.3.- STATIK UND DYNAMIK
MEMB2
Gerät für das Studium der Momentengleichgewichte bei einem Zwei-Arm-Hebel
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
7.1.3.- STATIK UND DYNAMIK
MBMRC
Gerät für das Gleichgewicht von sich hin- und herbewegenden Massen, computergesteuert
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
7.1.3.- STATIK UND DYNAMIK
MEAL
Gerät zur Nockenanalyse
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
7.1.3.- STATIK UND DYNAMIK
MDFC
Corioliskraft Demonstrationsmodell
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
7.1.3.- STATIK UND DYNAMIK
MFCE
Zentrifugalkrafteinheit
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
7.1.3.- STATIK UND DYNAMIK
MGI
Gyroskop
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
7.1.3.- STATIK UND DYNAMIK
CGU
Centrifugal Governor Unit
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- STATIK UND DYNAMIK
MED
Gerät für statisches und dynamisches Gleichgewicht.
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- STATIK UND DYNAMIK
MES
Einfaches Gleichgewichtsgerät.
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- STATIK UND DYNAMIK
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- STATIK UND DYNAMIK
MRYE1
Rad und Achseneinheit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- STATIK UND DYNAMIK
MRYE2
Rad und Differenialachsen Einheit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
7.1.3.- STATIK UND DYNAMIK
MELH
Einheit zum Studieren des Hooksche-Gesetzes
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
7.1.3.- STATIK UND DYNAMIK
MSHU
Simple Harmonic Motion Unit
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
7.1.3.- STATIK UND DYNAMIK
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MEVTC
Drehschwingungseinheit, computergesteuert
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MVL
Gerät für freie Schwingungen.
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...