KSGT Gerät zur kinematischen Untersuchung von Zahnradgetrieben

7.1.2.2.- VERZAHNUNG 14.1.2.2.- VERZAHNUNG

INNOVATIVE SYSTEME

The Unit for the Kinematic Study of Gear Trains, "KSGT", has been designed by EDIBON to perform the kinematic study of spur gears and planetary gears.

Allgemeine Beschreibung anzeigen

Katalog

Wettbewerbsspezifikationen

Erweiterungen

ICAI

Interaktive Computerunterrichtssoftware

ALLGEMEINE BESCHREIBUNG

The Unit for the Kinematic Study of Gear Trains, "KSGT", designed by EDIBON, includes a pivoting rail with a fixed shaft, to which two additional shafts can be attached at different positions depending on the experiment.

The cogwheels may be assembled on the shafts in combination, thus studying different gear ratios.

The spur gears can be studied having the pivoting rail fixed. One or two more shafts, and therefore one or two more cogwheels, may be placed on the rail.

Planetary gear trains can be studied with the pivoting rail free to rotate.. The adjustable rail acts as the planet carrier and supports the movable shaft on which the planet gears are mounted. The movement of the adjustable rail serves as the input to the planetary gear transmission. The planet gears transmit their motion to the sun gear, which is the output element of the gear train.

The gear ratio may be determined in both cases by counting the complete turns of the cogwheels.

ÜBUNGEN UND GEFÜHRTE PRAKTIKEN

GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN

Study of single-stage spur gears. Determine the gear ratio.
Study of multistage spur gears. Determine the gear ratio.
Study of planetary gears. Determine the gear ratio.

ERGÄNZENDE AUSRÜSTUNG

MTSF

Available

14.1.2.2.- VERZAHNUNG

MTSF

Gerät für Schneckengetriebe

The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...

ACCELERATION OF GEARED SYSTEM UNIT - MAE

Available

14.1.2.2.- VERZAHNUNG

MAE

Gerät zur Untersuchung der Beschleunigung in Zahnradsystemen

The "MAE" unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing to obtain a different moment of inertia and, therefore, to accelerate the system.Additionally, there are three masses of...

UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA

MSDA

Available

14.1.2.2.- VERZAHNUNG

MSDA

Gerät zur Montage einfacher Antriebe

The Simple Drives Assembly Unit, "MSDA", designed by EDIBON, allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows...

UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA

MCDA

Available

14.1.2.2.- VERZAHNUNG

MCDA

Gerät zur Montage kombinierter Antriebe

The Unit to Study Combined Drives Assembly, "MCDA", designed by EDIBON, allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit,...

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- VERZAHNUNG

MGTA

Gerät zur Montage von Zahnradgetrieben

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

Available

14.1.2.2.- VERZAHNUNG

MGE

Gerät zur Herstellung von Zahnrädern

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...

Available

14.1.2.2.- VERZAHNUNG

MEE

Gerät für einen Aufzug mit Zahnrädern

The Geared Lifting Unit, "MEE", has been designed by EDIBON to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support...

DMGT

Available

7.1.2.2.- VERZAHNUNG

DMGT

Gerät für die Dynamische Analyse von Mehrstufigen Zahnradgetrieben

The Dynamic Multistage Gear Train Analysis Unit, "DMGT", has been designed by EDIBON to study the dynamic behavior of a multistage spur gear system, as well as the influence of inertia and motion.The multistage system consists of an input shaft...

MESE-T

Available

7.1.2.2.- VERZAHNUNG

MESE-T

Getriebe-Studie

The Geared Study, "MESE/T", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission. The Gear Study,...

QUALITÄT

KUNDENDIENST

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS

KSGT Gerät zur kinematischen Untersuchung von Zahnradgetrieben

INNOVATIVE SYSTEME

Erweiterungen

ÄHNLICHE NEUIGKEITEN

ALLGEMEINE BESCHREIBUNG

ÜBUNGEN UND GEFÜHRTE PRAKTIKEN

GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN

ERGÄNZENDE AUSRÜSTUNG

QUALITÄT

KUNDENDIENST