Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course of Fluid Mechanics and learn about #fluids properties. #DiscoverEdibon #Engineering.
MINI-EEEC Basisgerät für Windenergie, computergesteuert.
INNOVATIVE SYSTEME
The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.
Erweiterungen
ÄHNLICHE NEUIGKEITEN
ALLGEMEINE BESCHREIBUNG
The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.
This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a computer controlled variable speed axial fan.
The air speed is varied by changing the rotational speed of the axial fan and a sensor allows for measuring that air velocity.
This fan generates the required air flow to make the rotor of the wind energy unit work. The generator converts the kinetic energy of the rotor into electric energy. The rotational speed of the wind turbine can be measured with a sensor.
The unit includes a DC load module with LEDs, a rheostat, a DC motor, a load selector and switches to select the type of load. Thus, the wind turbine may work in open circuit or connected to LEDS, to a rheostat or to a DC motor.
A voltage and current sensor measures the voltage and current provided by the wind turbine in order to determine the power.
This Computer Controlled Unit is supplied with the EDIBON Computer Control System (SCADA), and includes: The unit itself + a Control Interface Box + a Data Acquisition Board + Computer Control, Data Acquisition and Data Management Software Packages, for controlling the process and all parameters involved in the process.
ÜBUNGEN UND GEFÜHRTE PRAKTIKEN
GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN
- Study of the aerogenerator operation depending on the wind speed variation.
- Determination of the aerogenerator characteristic parameters.
- Study of the differences in the operation by using the three available blades'configurations (aerogenerator with six, three or two blades).
- Study of the influence of the load variation in the aerogenerator.
- Study of voltage, power and current.
- Experimental determination of efficiency.
- Study of the power generated by the aerogenerator depending on the wind speed.
- Study of the power generated by the aerogenerator depending on the number of blades.
- Determination of the wind energy measurement.
- Study of the characteristic curve of the aerogenerator at constant wind speed.
- Study of the characteristic curve of the aerogenerator at constant revolutions.
- Study of the DC loads connection.
- Sensors calibration.
MEHR PRAKTISCHE ÜBUNGEN FÜR DAS GERÄT
- Many students view results simultaneously. To view all results in real time in the classroom by means of a projector or an electronic whiteboard.
- Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gains, proportional, integral, derivative parameters, etc, in real time.
- The Computer Control System with SCADA allows a real industrial simulation.
- This unit is totally safe as uses mechanical, electrical/electronic, and software safety devices.
- This unit can be used for doing applied research.
- This unit can be used for giving training courses to Industries even to other Technical Education Institutions.
- Control of the MINI-EEEC unit process through the control interface box without the computer.
- Visualization of all the sensors values used in the MINI-EEEC unit process.
- By using PLC-PI additional 19 more exercises can be done.
- Several other exercises can be done and designed by the user.
ÄHNLICHE VERFÜGBARE GERÄTE
5.3.3.- WINDENERGIE
EEE
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
5.3.3.- WINDENERGIE
EEEC
Gerät für Windenergie, computergesteuert.
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
5.3.3.- WINDENERGIE
MINI-EEE
Basisgerät für Windenergie.
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
5.3.3.- WINDENERGIE
AEL-WPT
Anwendung von Windenergie mit Permanentmagnet-Synchrongenerator
Considering the above, this application allows experimental investigation on the conversion of wind energy into electricity by means of a wind power generator. The system configuration is stand-alone (isolated from the grid). The equipment is...
5.3.3.- WINDENERGIE
AEL-WPPI
Anwendung von Windkraftwerken mit Induktionsgenerator
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.3.3.- WINDENERGIE
AEL-SWT
Anwendung von Windturbinen in isolierten Netzwerken
The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by Edibon for the training at both the theoretical and practicallevels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...
5.3.3.- WINDENERGIE
AEL-WPTC
Anwendung von Windenergie mit Permanentmagnet-Synchrongenerator, mit SCADA
The Wind Power Application with Permanent Magnets Synchronous Generator, with SCADA, "AEL-WPTC", has been designed to study the conversion of wind energy into electricity by means of a permanent magnet synchronous generator. This application...
5.3.3.- WINDENERGIE
AEL-WPPIC
Anwendung von Windkraftwerken mit Induktionsgenerator, gesteuert vom Computer (PC)
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated...
ERGÄNZENDE AUSRÜSTUNG
5.3.3.- WINDENERGIE
AEL-WPP
Wind Power Plants with Double Feed Induction Generator Application
The Wind Power Plants with Double Feed Induction Generator Application, "AEL-WPP", is used to investigate the design and operation of modern wind power stations. The "AEL-WPP" consists of a prime motor that moves a double-feed induction generator...
5.3.3.- WINDENERGIE
AEL-WPT
Anwendung von Windenergie mit Permanentmagnet-Synchrongenerator
Considering the above, this application allows experimental investigation on the conversion of wind energy into electricity by means of a wind power generator. The system configuration is stand-alone (isolated from the grid). The equipment is...
5.3.3.- WINDENERGIE
AEL-WPTC
Anwendung von Windenergie mit Permanentmagnet-Synchrongenerator, mit SCADA
The Wind Power Application with Permanent Magnets Synchronous Generator, with SCADA, "AEL-WPTC", has been designed to study the conversion of wind energy into electricity by means of a permanent magnet synchronous generator. This application...
5.3.3.- WINDENERGIE
AEL-WPPIC
Anwendung von Windkraftwerken mit Induktionsgenerator, gesteuert vom Computer (PC)
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated...
5.3.3.- WINDENERGIE
AEL-WPPI
Anwendung von Windkraftwerken mit Induktionsgenerator
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.3.3.- WINDENERGIE
AEL-SWT
Anwendung von Windturbinen in isolierten Netzwerken
The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by Edibon for the training at both the theoretical and practicallevels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...
5.3.3.- WINDENERGIE
SWPC
Computer Controlled Stand-alone Water Pumping Application
The Computer Controlled Single Water Pumping Application, "SWPC", has been designed by Edibon to show the user the basic principles of operation of pumping equipment in isolated networks, exposing in a didactic way the elements involved in the...
5.3.3.- WINDENERGIE
SWP
Stand-alone Water Pumping Application
The Water Pumping Application, "SWP", has been designed by Edibon to show the user the basic principles of operation of pumping equipment in isolated networks, exposing in a didactic way the elements involved in the process of generation and...
5.3.3.- WINDENERGIE
EEEC
Gerät für Windenergie, computergesteuert.
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
5.3.3.- WINDENERGIE
EEE
Gerät für Windenergie.
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
5.3.3.- WINDENERGIE
MINI-EEE
Basisgerät für Windenergie.
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...