Top de Vendas

Os mais vendidos

Mostrando 511-540 de um total de 950 produto(s)

MTE2

Available

7.2.2.- ENGRENAGENS, DIFERENCIAIS E TRANSMISSÕES

MTE2

Equipamento de Transmissão Epicicloidal (2 elementos)

The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

MTE3

Available

7.2.2.- ENGRENAGENS, DIFERENCIAIS E TRANSMISSÕES

MTE3

Equipamento de Transmissão Epicicloidal (3 elementos)

The Epicyclic Gear Unit (3 elements), "MTE3", designed by EDIBON, consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears...

TCPT

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

TCPT

Equipamento de Treinamento de Bombas Circulatórias

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

MEGE

Available

7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA

MEGE

Equipamento de Treinamento de Extensômetros

The Strain Gauge Training Unit, "MEGE", designed by EDIBON, provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion,...

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

WHT

Equipamento de Treinamento em Aquecedores de Água

The Water Heater Training Unit, "WHT", designed by EDIBON, allows demonstrating the operation of three types of water heaters.The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential...

BACKFLOW PREVENTION TRAINING UNIT - BFPT

BFPT

Available

8.9.3.- INSTALAÇÕES E MANUTENÇÃO

BFPT

Equipamento de Treinamento em Dispositivos Antirretorno

The Backflow Prevention Training Unit, "BFPT", designed by EDIBON, allows verifying the operation of multiple non-return devices.The system contains the most common backflow prevention devices used in the industry. The main objective is to...

TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT

TEMT

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

TEMT

Equipamento de Treinamento para Medições de Temperatura

The Temperature Measurement Training Unit, "TEMT", designed by EDIBON, allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four...

THBT

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

THBT

Equipamento de Treinamento para o Equilíbrio Hidráulico de Radiadores

The Hydraulic Radiator Balancing Training Unit, "THBT", designed by EDIBON, allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is...

COMPUTER CONTROLLED ION EXCHANGE UNIT - EIIC

EIIC

Available

11.1.9.- TROCA IÔNICA E CORROSÃO

EIIC

Equipamento de Troca Iônica, Controlado por Computador (PC)

The Computer Controlled Ion Exchange Unit, "EIIC", designed by EDIBON, is a self-contained unit consisting of a panel with two transparent columns to be filled with anionic and cationic resins, plus a spare column and a computer controlled pump...

HEAT EXCHANGERS IN THE REFRIGERATION UNIT - THER

THER

Available

9.7.- TROCADORES DE CALOR

THER

Equipamento de Trocadores de Calor em Refrigeração

The Heat Exchangers in the Refrigeration Unit, "THER", designed by EDIBON, consists of a refrigeration circuit, with the most common heat exchangers in refrigeration circuits. All the elements are clearly mounted in the front panel of the unit.The...

COMPUTER CONTROLLED PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMTC

AMTC

Available

8.8.- SISTEMA DE TUBULAÇÃO PARA CONDUÇÃO DE FLUIDOS

AMTC

Equipamento de Unidade de Rede de Tubulação, com Bancada Hidráulica (FME00), Controlado por Computador (PC)

The Computer Controlled Pipe Network Unit, with Hydraulics Bench (FME00), "AMTC", consists of a pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required...

VENTURI, BERNOULLI AND CAVITATION UNIT - FME22

FME22

Available

8.1.4.- HIDRODINÂMICA

FME22

Equipamento de Venturi, Bernoulli e Cavitação

The Venturi, Bernoulli and Cavitation Unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...

MVRE

Available

7.1.4.- VIBRAÇÕES E OSCILAÇÕES

MVRE

Equipamento de Vibração de uma Mola de Torção em Espiral

The Spiral Torsion Spring Vibration Unit, "MVRE", has been designed by EDIBON for the experimental study of the phenomena associated with spiral torsion springs and mass-spring systems. The unit allows a practical understanding of the principles...

Available

7.1.4.- VIBRAÇÕES E OSCILAÇÕES

MVL

Equipamento de Vibrações Livres

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- VIBRAÇÕES E OSCILAÇÕES

MVLF

Equipamento de Vibrações Livres e Forçadas

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

Available

7.1.6.- MECÂNICA DE ESTRUTURAS

MVV

Equipamento de Vigas Cantiléver

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...

DROP BALL VISCOMETER AND RESISTANCE COEFFICIENT DETERMINATION UNIT - HVB

Available

8.2.- MEDIÇÃO

HVB

Equipamento de Viscosímetro de Esfera e Unidade de Determinação de Coeficiente de Resistência

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", designed by EDIBON, consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be...

MOBILE BED AND FLOW VISUALIZATION UNIT (WORKING SECTION: 4000X610 MM) - HVFLM-4

HVFLM-4

Available

13.1.- HIDROLOGIA E HIDROGEOLOGIA

HVFLM-4

Equipamento de Visualização de Fluxo e Leito Móvel (seção de trabalho: 4000X610 mm)

The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....

HYDROGEN BUBBLE FLOW VISUALIZATION UNIT - UVF

Available

8.4.- VISUALIZAÇÃO DE FLUXO

UVF

Equipamento de Visualização de Fluxo por Borbulhas de Hidrogênio

The Hydrogen Bubble Flow Visualization Unit, "UVF", designed by EDIBON, is a self-contained unit designed to study different flow patterns through the hydrogen bubble flow visualization technique.Bubbles are generated by electrolysis by the...

LAMINAR FLOW VISUALIZATION AND ANALYSIS UNIT - LFA

Available

8.4.- VISUALIZAÇÃO DE FLUXO

LFA

Equipamento de Visualização e Análise de Fluxo Laminar

The Laminar Flow Visualization and Analysis Unit, "LFA", allows a complete study of the two-dimensional problems associated with the laminar flow by the visualization of the different models of flow, which can be observed thanks to an efficient...

Available

7.1.3.- ESTÁTICA E DINÂMICA

MIF

Equipamento de Volante de Inércia

The Inertia Flywheel Unit, "MIF",designed by EDIBON, consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around...

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TMT

Equipamento de Medição de Temperatura

The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...

COMPUTER CONTROLLED LIQUID PACKAGING TEACHING UNIT - EDLC

EDLC

Available

12.2.- TRATAMENTO DE PRODUTOS LÁCTEOS

EDLC

Equipamento Didático de Envasamento de Líquidos, Controlado por Computador (PC)

The Computer Controlled Liquid Packaging Teaching Unit, "EDLC", designed by EDIBON, unit is a liquid and semi-dense products dosing machine based on dose delivery through a pneumatically-operated cylinder.The product is absorbed by the unit...

COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC

EACC

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

EACC

Equipamento Didático de Produção de Água Quente e Sistema de Aquecimento, Controlado por Computador (PC)

The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...

HVAB

Available

8.7.2.- VENTILADORES

HVAB

Equipamento Didático de Ventilador Axial

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...

COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC

HVAC

Available

8.7.2.- VENTILADORES

HVAC

Equipamento Didático de Ventilador Axial, Controlado por Computador (PC)

The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...

HVCB

Available

8.7.2.- VENTILADORES

HVCB

Equipamento Didático de Ventilador Centrífugo

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...

COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC

HVCC

Available

8.7.2.- VENTILADORES

HVCC

Equipamento Didático de Ventilador Centrífugo, Controlado por Computador (PC)

The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...

COMPUTER CONTROLLED SOLIDS PACKAGING TEACHING UNIT - EDSC

EDSC

Available

12.1.- TECNOLOGIA DE ALIMENTOS

EDSC

Equipamento Didático para Envasamento de Sólidos, Controlado por Computador (PC)

The Computer Controlled Solids Packaging Teaching Unit, "EDSC", designed by EDIBON, has been conceived for the complete study of the dosing, filling, and sealing process of solid products. Its design allows reproducing, at laboratory scale, the...

EMAN

Available

12.2.- TRATAMENTO DE PRODUTOS LÁCTEOS

EMAN

Equipamento Didático para Fabricação de Manteiga

The Butter Maker Teaching Unit, "EMAN", has been designed by EDIBON to provide practical training in the manufacture of butter.The main structure is a stainless steel tank with a capacity of 25 l. At the top, a cover made of stainless steel with...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS