8.9.- INSTALAÇÕES E MANUTENÇÃO

As necessidades da sociedade actual são um desafio para qualquer indústria, uma vez que têm de ser em contínuo evolução e renovação para se adaptarem a essas necessidades.

Ver mais

Nos últimos anos, como resultado da nova revolução industrial ou Indústria 4. 0, a emergência da Internet Industrial das Coisas (IIoT) e da Fábricas de Arte, essa adaptação é possível graças à aplicação das técnicas mais sofisticadas na concepção de novas instalações ou na renovação das existentes.

A pesar de todos estes avanços tecnológicos e dos exaustivos controlos efectuados, não se debe esquecer que qualquer elemento que participe no processo produtivo será sujeito a um desgaste mecânico e eléctrico(esforços, cargas, etc.) e a sua vida útil é limitada. Para evitar falhas de dadostróficos, paragens na produção ou qualquer tipo de processo que implique um aumento de tempos não produtivos e, portanto, um aumento de custos, é extremamente importante realizar um bom manutenção de maquinaria, sistemas eléctricos, etc.

Tradicionalmente, apenas dois tipos de manutenção foram considerados:

  • Correcção: a falha é resolvida depois de já ter ocorrido.
  • Preventivo: revisão periódica de todos esses elementos problemáticos e sua substituição, se necessário.

Estes tipos de manutenção envolvem custos muito elevados e desnecessários na maioria dos casos. Hoje em dia, graças à disponível tecnologia, é possível efectuar previsão manutenção constituída por uma abrangente análise de todas as variáveis que intervêm em todos os componentes de um sistema e ser capaz de os substituir no momento certo.

Mas, se for preferível um maior controlo sobre as falhas que podem sofrer todos os componentes mecânicos sujeitos a desgaste, existe outro tipo de manutenção, conhecido como proactivo manutenção. Vai um passo além da manutenção predictiva, procurando a raiz do problema.

Ver produtos
INSTALAÇÕES E MANUTENÇÃO UNITS
Mostrando 1-30 de um total de 32 produto(s)
UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM
  • ANVCM
Available
8.9.1.- MODELOS SECCIONADOS
ANVCM
Unit to Study an Angular Needle Valve Cutaway Model
The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- MODELOS SECCIONADOS
BVCM
Unit to Study a Ball Valve Cutaway Model
The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM
  • LNVCM
Available
8.9.1.- MODELOS SECCIONADOS
LNVCM
Unit to Study a Lift Non-return Valve Cutaway Model
The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- MODELOS SECCIONADOS
PMFCM
Unit to Study a Pipe Mesh Filter Cutaway Model
The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- MODELOS SECCIONADOS
WMCM
Unit to Study a Water Meter Cutaway Model
The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM
  • UHCM
Available
8.9.1.- MODELOS SECCIONADOS
UHCM
Unit to Study an Underground Hydrant Cutaway Model
The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...
  • CPCM
Available
8.9.1.- MODELOS SECCIONADOS
CPCM
Centrifugal Pump Cutaway Model Unit
The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
  • GPCM
Available
8.9.1.- MODELOS SECCIONADOS
GPCM
Gear Pump Cutaway Model Unit
The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
  • PPCM
Available
8.9.1.- MODELOS SECCIONADOS
PPCM
Piston Pump Cutaway Model Unit
The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- MODELOS DESMONTÁVEIS
ASV
Assembly of a Shut-Off Valve Unit
The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- MODELOS DESMONTÁVEIS
AMCV
Assembly of a Motorized Control Valve Unit
The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- MODELOS DESMONTÁVEIS
ACPV
Assembly of a Control Pneumatic Valve Unit
The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- MODELOS DESMONTÁVEIS
AMP
Assembly and Maintenance of Pumps
The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • Acessório de AMP
Available
8.9.2.- MODELOS DESMONTÁVEIS
AMCP
Assembly and Maintenance of a Centrifugal Pump Unit
Acessório de AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA
  • PVFA
Available
8.9.3.- INSTALAÇÕES E MANUTENÇÃO
PVFA
Pipes, Valves and Fittings Assembly Unit
The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...
BACKFLOW PREVENTION TRAINING UNIT - BFPT
  • BFPT
Available
8.9.3.- INSTALAÇÕES E MANUTENÇÃO
BFPT
Backflow Prevention Training Unit
The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- TREINAMENTO DE INSTALAÇÕES E MANUTENÇÃO
TEV3V
Three-Way Mixing Valve Training Unit
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- TREINAMENTO DE INSTALAÇÕES E MANUTENÇÃO
TEV4V
Four-Way Mixing Valve Training Unit
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- TREINAMENTO DE INSTALAÇÕES E MANUTENÇÃO
TEIS
Sanitary Fittings Training Unit
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- TREINAMENTO DE INSTALAÇÕES E MANUTENÇÃO
TIAP
Drinking Water Installation Unit
The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- TREINAMENTO DE INSTALAÇÕES E MANUTENÇÃO
TPAP
Protection of Drinking Water Training Unit
The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- TREINAMENTO DE INSTALAÇÕES E MANUTENÇÃO
TELT
Pipe Cleaning Training Unit
The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
Solicitar informação