7.1.2.- MÁQUINAS SIMPLES

MÁQUINAS SIMPLES UNITS
Mostrando 1-22 de um total de 22 produto(s)
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
14.1.2.1.- MECANISMOS
MBD
Slider Crank Mechanism
The Slider Crank Mechanism, “MBD”, designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
SCOTCH YOKE MECHANISM - MYE
  • MYE
Available
14.1.2.1.- MECANISMOS
MYE
Scotch Yoke Mechanism
The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion ofa slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...
SLOTTED LINK MECHANISM - MBM1
  • MBM1
Available
14.1.2.1.- MECANISMOS
MBM1
Slotted Link Mechanism
The Slotted Link Mechanism, “MBM1”, is an example of a quick-return mechanism, capable of transforming circular motion intoreciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to a...
WHITWORTH QUICK RETURN MECHANISM - MBM2
  • MBM2
Available
14.1.2.1.- MECANISMOS
MBM2
Whitworth Quick Return Mechanism
The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...
FOUR-BAR MECHANISM - MCA
  • MCA
Available
14.1.2.1.- MECANISMOS
MCA
Four-Bar Mechanism
The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scaleto...
GENEVA STOP MECHANISM - MME
  • MME
Available
14.1.2.1.- MECANISMOS
MME
Geneva Stop Mechanism
The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
COUPLING MECHANISM - MAC
  • MAC
Available
14.1.2.1.- MECANISMOS
MAC
Coupling Mechanism
The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
14.1.2.1.- MECANISMOS
MUN
Mecanismo de Junta Universal
The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or Cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
CAM AND FOLLOWER MECHANISM - MEX
  • MEX
Available
14.1.2.1.- MECANISMOS
MEX
Cam and Follower Mechanism
The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
CRANK MECHANISM - MBI
  • MBI
Available
14.1.2.1.- MECANISMOS
MBI
Crank Mechanism
The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
ACKERMANN STEERING MECHANISM - MDA
  • MDA
Available
7.1.2.1.- MECANISMOS
MDA
Ackermann Steering Mechanism
The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
WINCH MECHANISM - MMEL
  • MMEL
Available
14.1.2.1.- MECANISMOS
MMEL
Winch Mechanism
The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...
BAR LINKAGES UNIT - MBLU
  • MBLU
Available
7.1.2.1.- MECANISMOS
MBLU
Equipamento de Acoplamento de Hastes
The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts.The "MBLU" unit includes a selection of more than twenty perforated bars of different lengths and pivots or "joints" to allow students to configure...
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- ENGRENAGENS
MTSF
Worm and Wheel Unit
The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...
ACCELERATION OF GEARED SYSTEM UNIT - MAE
  • MAE
Available
14.1.2.2.- ENGRENAGENS
MAE
Acceleration of Geared System Unit
The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
SIMPLE DRIVES ASSEMBLY UNIT - MSDA
  • MSDA
Available
14.1.2.2.- ENGRENAGENS
MSDA
Simple Drives Assembly Unit
The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...
UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA
  • MCDA
Available
14.1.2.2.- ENGRENAGENS
MCDA
Combined Drives Assembly Unit
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
GEAR TRAIN ASSEMBLY UNIT - MGTA
  • MGTA
Available
14.1.2.2.- ENGRENAGENS
MGTA
Gear Train Assembly Unit
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- ENGRENAGENS
MGE
Gear Generation Unit
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- ENGRENAGENS
MEE
Equipamento de Içamento com Engrenagens
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
GEARED STUDY UNIT OLD - MESE-T
  • MESE-T
Available
7.1.2.2.- ENGRENAGENS
MESE-T
Geared Study
The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.For the dynamic study...
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- ENGRENAGENS
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
Solicitar informação