HMM-V500 Multimanometer mit 8 manometrischen Röhren der Länge von 500 mm und in vertikaler position.

MULTIMANOMETER WITH 8 MANOMETRIC TUBES OF 500 MM LENGTH, VERTICAL POSITION - HMM-V500

INNOVATIVE SYSTEME

Vertical Multimanometer (8 Manometric Tubes, 500 mm in Length), "HMM-V500," designed by EDIBON, is a multimanometer designed to accurately measure and analyze pressure variations in vertical configurations.

Allgemeine Beschreibung anzeigen

Katalog

Wettbewerbsspezifikationen

ALLGEMEINE BESCHREIBUNG

ÄHNLICHE VERFÜGBARE GERÄTE

INCLINED MULTIMANOMETER WITH 20 MANOMETRIC TUBES OF 250 MM LENGTH - HMM-I1000

HMM-I1000

Available

8.2.- MESSUNG

HMM-I1000

Geneigtes Multimanometer mit 20 manometrischen Röhren mit der Länge von 250 mm.

The Inclined Multimanometer with 20 manometric tubes of 250 mm length, "HMM-I1000," designed by EDIBON, allows measuring and comparing pressures at different points or fluids simultaneously.This facilitates the detailed analysis of pressure...

HMM-W500

Available

8.2.- MESSUNG

HMM-W500

U-Form Doppelmanometer.

With the U-Shape Double Manometer, "HMM-W500," designed by EDIBON, the study of different pressures is facilitated for operation with the Pitot tube. The U-Shape Double Manometer allows finding the pressure between two points or two fluids.The...

HMM-U1000

Available

8.2.- MESSUNG

HMM-U1000

U-Form Manometer.

The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...

HMM-4B

Available

8.2.- MESSUNG

HMM-4B

4 Manometergeräte des Typs "Bourdon".

The 4 Bourdon type Manometers Unit, "HMM-4B," designed by EDIBON, stands out for incorporating Bourdon-type gauges for precise pressure measurements in fluid systems.This unit enables a detailed analysis of pressure variations at multiple points...

MULTIMANOMETER WITH 12 MANOMETRIC TUBES OF 500 MM LENGHT, VERTICAL POSITION - HMM-V500-12

HMM-V500-12

Available

8.2.- MESSUNG

HMM-V500-12

Multimanometer mit 12 manometrischen Rühren der Länge von 500 mm und in vertikaler position.

One type of gauge is a U-shaped gauge, which balances the unknown pressure with a known pressure. The pressure is determined by measuring the difference in liquid level of the two branches. Most of these gauges can be used as open gauges or as...

ERGÄNZENDE AUSRÜSTUNG

FMDU

Available

8.2.- MESSUNG

FMDU

Demonstrationsgeräte für Durchflussmesser

The Flow Meters Demonstration Unit, "FMDU", designed by EDIBON demonstrates the important characteristics of fifteen types of flow meters used in the measurement of water flow through pipes or open channels.The main elements are a service module...

HEMP

Available

8.2.- MESSUNG

HEMP

Druckmessgerät.

The Pressure Measurement Unit, "HEMP", enables a wide range of investigations and studies into pressure measurement techniques, using Bourdon type manometers and different U-tube manometers, to understand the operation, the characteristics of the...

DROP BALL VISCOMETER AND RESISTANCE COEFFICIENT DETERMINATION UNIT - HVB

Available

8.2.- MESSUNG

HVB

Tropfenkugel-Viskosimeter und Widerstandskoeffizienten-Bestimmungsgerät

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be filled with liquids...

PRECISION PRESSURE GAUGE CALIBRATOR - HCMP

HCMP

Available

8.2.- MESSUNG

HCMP

Kalibrator für Präzisionsmanometer.

The Precision Pressure Gauge Calibrator, "HCMP", is a self-contained and portable dead weight precision pressure gauge calibrator.The unit allows the calibration of pressure gauges up to 300 bar. Calibration is accurate within ± 0.015 % of...

PRESSURE MEASUREMENT AND CALIBRATION UNIT - TMCP

TMCP

Available

8.2.- MESSUNG

TMCP

Druckmess- und Kalibrierungsgerät

The Pressure Measurement and Calibration Unit, "TMCP", has been designed to study the concept of pressure and the different methods and techniques used to measure this variable.The dead-weight calibrator consists of a cylinder in which interior a...

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- INSTRUMENTATION & KONTROLLE

SCSP

Drucksensor- Kalibrierungssystem

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

MANOMETERS & MULTIMANOMETERS (SEVERAL TYPES): - HMM

Available

8.2.- MESSUNG

HMM

Manometer & Multimanometer (Verschiedene Typen):

Thanks to the "Manometer and Multimanometer, "HMM" collection designed by EDIBON, a comprehensive and versatile solution is provided with a wide variety of manometers tailored to specific pressure measurement needs. This collection ensures safe...

HMM-W500

Available

8.2.- MESSUNG

HMM-W500

U-Form Doppelmanometer.

HMM-U1000

Available

8.2.- MESSUNG

HMM-U1000

U-Form Manometer.

HMM-I1000

Available

8.2.- MESSUNG

HMM-I1000

Geneigtes Multimanometer mit 20 manometrischen Röhren mit der Länge von 250 mm.

HMM-V500-12

Available

8.2.- MESSUNG

HMM-V500-12

Multimanometer mit 12 manometrischen Rühren der Länge von 500 mm und in vertikaler position.

HMM-4B

Available

8.2.- MESSUNG

HMM-4B

4 Manometergeräte des Typs "Bourdon".

QUALITÄT

KUNDENDIENST

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS

HMM-V500 Multimanometer mit 8 manometrischen Röhren der Länge von 500 mm und in vertikaler position.

INNOVATIVE SYSTEME

ÄHNLICHE NEUIGKEITEN

ALLGEMEINE BESCHREIBUNG

ÄHNLICHE VERFÜGBARE GERÄTE

ERGÄNZENDE AUSRÜSTUNG

QUALITÄT

KUNDENDIENST