14.1.- BIOMECHANIK

Biomechanik studiert die Bewegungsmechanik des Lebewesens Organismus, darunter die Menschenkörperbewegung. Diese Studie reicht von den einfachsten Bewegungen des täglichen Lebens, wie Arbeit oder sportliche Betätigung, bis hin zur Bewegung einiger innerer Organe, wie des Herzens. Um die Kinetik des menschlichen Körpers zu untersuchen, wendet Biomechanik die Prinzipien der Mechanik und das Wissen der Anatomie und der Physiologie an, die es ermöglichen, neue Diagnose- und Behandlungsinstrumente zu entwerfen und bessere Implantate und ProthesenDesigns zu entwickeln.

Mehr sehen

Heutzutage analysiert Biomechanik die Bewegungen der Kombination von Gelenken und Muskeln. Diese Analysen ermöglichen es uns, die Belastungen und Anstrengungen zu untersuchen, denen der menschliche Körper ausgesetzt ist. Die Kenntnis der Menschenkinetik ermöglicht die Behandlung von Verletzungen und deren anschließende Rehabilitation, die Konstruktion von Prothesen, die eine Bewegungsflexibilität ermöglichen, die Suche nach neuen Sporttechniken zur Steigerung der Leistungsfähigkeit einer körperlichen Aktivität oder die Vorbeugung der Verschlechterung des Organismus bei der Ausübung von Tätigkeiten am Arbeitsplatz und zu Hause. Dieses Wissen kann in mehrere Bereiche unterteilt werden: Biomechanik: Medizinische Biomechanik, Sportbiomechanik und Berufsbiomechanik. Eine weitere Anwendung der Biomechanik ist das Design von Roboteranwendungen. Die von den Roboterarmen ausgeführten Bewegungen oder die Verdrängungskapazität einiger mittels eines elektro-mechanischen Bewegungsapparates basieren auf der Mechanik von Lebewesen.

Das kontinuierliche Studium des mechanischen Verhaltens von Organismen führt dazu, dass die Biomechanikanwendungen bionische Prothesen und künstliche Organismen entwickeln, die das normale Funktionieren eines realen Organismus simulieren und auf Reize reagieren können. Darüber hinaus wird die Verbesserung der Technologie Aussenskelette die Mobilität von Menschen mit eingeschränkter Beweglichkeit erhöhen und die körperlichen Fähigkeiten bei der Ausübung von Tätigkeiten unter grosser Belastung verbessern.

Siehe Produkte

BIOMECHANIK SYSTEME FÜR TECHNISCHE AUSBILDUNG

37 - 72 von 111 Artikel(n)

Available

7.1.3.- STATIK UND DYNAMIK

CGU

Gerät für Zentrifugale Regler

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- STATIK UND DYNAMIK

MED

Gerät für dynamisches/statisches Gleichgewicht

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- STATIK UND DYNAMIK

MES

Gerät für einfaches Gleichgewicht

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- STATIK UND DYNAMIK

MIF

Gerät für ein Schwungrad

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- STATIK UND DYNAMIK

MRYE1

Gerät für Rad und Achse (Drehbank)

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

MELH

Available

7.1.3.- STATIK UND DYNAMIK

MELH

Gerät zur Untersuchung des Hooke'schen Gesetzes

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- STATIK UND DYNAMIK

MRYE2

Gerät für Rad und Differentialachse (Differential-Drehbank)

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEVTC

Gerät zur Untersuchung von Torsionsschwingungen, computergesteuert (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

MVRE

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MVRE

Gerät für die Schwingung einer Spiralfeder

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MVL

Gerät für freie Schwingungen

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MVLF

Gerät für freie und erzwungene Schwingungen

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

CMVAS

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

CMVAS

Gerät zur umfassenden Analyse mechanischer Schwingungen

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB

MEVLB

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEVLB

Gerät zur Untersuchung freier Schwingungen in Stäben

The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...

MSHU

Available

7.1.3.- STATIK UND DYNAMIK

MSHU

Gerät für harmonische Schwingungen

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- STATIK UND DYNAMIK

SRI

Gerät zur Untersuchung des Rotations-Trägheitsmoments

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MOT

Gerät für Torsionsschwingungen

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MVCC

Gerät zur Untersuchung der kritischen Geschwindigkeit, computergesteuert (PC)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

MEER

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEER

Gerät zur Untersuchung der Rotation von Wellen

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MCF

Gerät für Reibungsriemen

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEF

Gerät zur Untersuchung der Reibung

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MPCO

Gerät zur Untersuchung der Druckverteilung in Lagern

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT

Modulares Gerät für Tribologie

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-UB

Gerät für Antriebsversuche in der Tribologie

Zubehör von MEMT

This unit is common for the modules type "MEMT".It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in the...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-1

Radiale Druckverteilung in einem Gleitlager

Zubehör von MEMT

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-2

Dynamische Reibung eines Zylinders auf einer Walze

Zubehör von MEMT

This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-3

Dynamische Reibung eines Bolzens auf einer Scheibe

Zubehör von MEMT

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-4

Rollreibung bei Rädern

Zubehör von MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-5

Elastohydrodynamische Schmierung

Zubehör von MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-6

Reibungsschwingung

Zubehör von MEMT

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MCD

Gerät für einen dünnwandigen Zylinder

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MBF

Gerät zur Untersuchung der Reibung in Lagern

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A

MCF/A

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MCF/A

Gerät für Reibungsriemen mit Dynamometern

The Belt Friction Unit with Dynamometers, "MCF/A", designed by EDIBON, allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the...

MCPG

Available

7.1.6.- STRUKTURMECHANIK

MCPG

Gerät für einen dickwandigen Zylinder

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- STRUKTURMECHANIK

MFPG

Gerät zur Untersuchung von Kräften in Kranarmen

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- STRUKTURMECHANIK

MVS

Gerät für eine Hängebrücke

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

MARP

Available

7.1.6.- STRUKTURMECHANIK

MARP

Gerät für einen parabolischen Bogen

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS