On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
BSUB Basiseinheit
2.4.1.- INSTRUMENTATION & KONTROLLE
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
14.2.2.- INSTRUMENTATION & KONTROLLE
INNOVATIVE SYSTEME
This unit is common for the different test modules type "BS", and can work with one orseveral modules.
Erweiterungen
ÄHNLICHE NEUIGKEITEN
ALLGEMEINE BESCHREIBUNG
This unit is common for the different test modules type "BS", and can work with one orseveral modules.
The BSUB is a complete unit designed to provide signal conditioning for manysensors and transducers output signals that must be conditioned. These circuitsconsist of differential and instrumentation amplifiers, filters, current to voltage andfrequency to voltage converters, etc., developed for transducers such aspotentiometers, RTD's, thermocouples, strain gauge bridges, etc.
The BSUB also includes a PID controller, industrial controller, DC Dimer and otherinteresting elements that can be used to introduce students the concepts aboutprocess control.
The sensors connect to the Base Unit and with power supplies through 2 mmterminals located in the front panel of each test module. The test modules mayoperate independently one of another.
ÄHNLICHE VERFÜGBARE GERÄTE
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BSPC
This unit is common for the different test modules type "BS", and can work with one or several modules. The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned...
ERGÄNZENDE AUSRÜSTUNG
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
SAIT
Transducers and Instrumentation Unit
The SAIT Trainer is designed to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control industrial processes.It is a trainer with a logical...
14.2.1.3.- DIGITALE ELEKTRONIK
TDS
Computergesteuerte Lehreinheit zum Erlernen der digitalen Signalverarbeitung
The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...
14.2.1.3.- DIGITALE ELEKTRONIK
CADDA
Computergesteuerte Unterrichtseinheit zum Studium von Analog/Digital- und Digital/Analog-Wandlern
"CADDA" unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and viceversa.The unit also allows the user to study in...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS
Baukastensystem zum Erlernen von Sensoren:
"BS" System includes a set of electronic components with a twofold purpose: to control the signal produced by the transducers, and to evaluate and quantify it.Sensors or transducers are common elements in the state of our technology. Therefore...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BSPC
Computergesteuerte Basiseinheit.
This unit is common for the different test modules type "BS", and can work with one or several modules. The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS1
Vibrations and/or Deformations Test Module
This Test Module has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one carrying the sensors, which can have...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS2
Temperatur- Testmodul.
The Temperature Test Module has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space. Temperatures...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS3
Druck- Testmodul.
The Pressure Test Module has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques.On the left upper side of the module there is a pressure chamber with...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS4
Durchfluss- Testmodul
The objective this module is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one ofthem there is a pumping system that allows to pump the water from the reserve tank, using a...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS5
Ofen- Testmodul
With "BS-5" Test Module is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable speed...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS6
Füllstand- Testmodul.
The Liquid Level Test Module "BS-6" has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS7
Tachometer- Testmodul.
The Tachometer Test Module "BS-7" has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
QUALITÄT

KUNDENDIENST
