7.3.- WERKSTOFFTECHNIK

Werkstofftechnik ist der wissenschaftliche und industrielle Zweig, der für eine industrielle Interpretation der Werkstoffkunde verantwortlich ist. Anthropologisch wurden die verschiedenen Stufen der menschlichen Entwicklung nach den bei der Herstellung von Werkzeugen verwendeten Materialien klassifiziert (Steinzeit, Bronzezeit usw.). So ist die Entwicklung der Menschheit eng mit dem Studium neuer Werkstoffe verbunden.

In den letzten 200 Jahren wurden Entdeckungen über Materialien gemacht, die so aufschlussreich sind wie der Beitrag von Gibbs. Er zeigte die Existenz einer Beziehung zwischen den Eigenschaften eines Materials und seiner Struktur auf. Diese Entdeckungen ermöglichten die Entwicklung neuer Materialien, wie z.B. Graphen, und die Untersuchung neuer Bereiche, wie z.B. Nanomaterialien oder Nanotechnologie.

Um diesen Entwicklungsstand zu erreichen, wurde eine große Anzahl von Tests durchgeführt, darunter mechanische Biegetests, HärteTests (Rockell, Brinell, Vickers, Martens), Torsionsversuche, Zugversuche (Zähigkeit und Elastizität), Zugversuche (Kriechen), Scherversuche, sowie chemische Versuche (thermische Behandlungen, innere Strukturen, etc.). Ebenso können Materialien klassifiziert werden als:

Metalle (Eisen- und Nichteisenmetalle).
Keramik.
Polymere (Thermoplaste, Duroplaste und Elastomere).
Verbundwerkstoffe.

Die Anwendungen dieser chritte zeigen sich in verschiedenen industriellen Bereichen, wie den Automobilen, elektronischen, Luft- und Raumfahrt, Luftfahrt- und biomedizinischen Bereichen, was der Werkstofftechnik die Bedeutung verleiht, die sie in der heutigen Gesellschaft hat.

WERKSTOFFTECHNIK SYSTEME FÜR TECHNISCHE AUSBILDUNG

1 - 30 von 30 Artikel(n)

COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC

EFOC

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

EFOC

Gerät für Fotoelastizität, computergesteuert (PC)

The Computer Controlled Photoelasticity Unit, "EFOC", has been designed by EDIBON for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very...

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

EFO

Gerät für Fotoelastizität

The Photoelasticity Unit, "EFO", has been designed by EDIBON for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the...

COMPUTER CONTROLLED PHOTOELASTICITY UNIT WITH ARTIFICIAL VISION SYSTEM - EFOV

EFOV

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

EFOV

Gerät für Fotoelastizität mit Künstlichem Visionssystem, computergesteuert (PC)

The Computer Controlled Photoelasticity Unit with Artificial Vision System, "EFOV", has been designed by EDIBON for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials,...

MEGE

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

MEGE

Trainingsgerät für Dehnungsmessstreifen

The Strain Gauge Training Unit, "MEGE", designed by EDIBON, provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion,...

UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE

MFGE

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

MFGE

Gerät zur Bestimmung des Dehnungsfaktors von Dehnungsmessstreifen

The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", designed by EDIBON, allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure...

PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

PSD

Gerät zur fotoelastischen Demonstration von Spannungen

The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- MECHANISCHE TESTS

EEU/20KN

Universalgerät für Materialprüfungen

The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...

EEDB

Available

7.3.2.1.- MECHANISCHE TESTS

EEDB

Gerät für Härteprüfungen "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- MECHANISCHE TESTS

EBVR

Gerät für Härteprüfungen nach "Brinell", "Vickers" und "Rockwell"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", designed by EDIBON, consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness...

EEFCR

Available

7.3.2.1.- MECHANISCHE TESTS

EEFCR

Gerät für Kriechprüfungen ("Creep")

The Creep Testing Unit, "EEFCR", has been designed by EDIBON to the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- MECHANISCHE TESTS

EEFC

Gerät für Ermüdungsprüfungen, computergesteuert (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.3.2.1.- MECHANISCHE TESTS

EEF

Gerät für Ermüdungsprüfungen

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- MECHANISCHE TESTS

EEICI

Gerät für Schlagbiegeversuch nach Charpy und Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

EEICI/300

Available

7.3.2.1.- MECHANISCHE TESTS

EEICI/300

Gerät für Schlagversuch nach Charpy und Izod, 300Nm

The 300 Nm Charpy and Izod Impact Testing Unit, "EEICI/300", designed by EDIBON, consists of a pendulum supported by bearings with a 900 mm long arm and a clamping system at the starting position of the test. At one end of the pendulum, either the...

Available

7.3.2.1.- MECHANISCHE TESTS

MUP

Universelles Gerät für Knickversuche

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

MFLT

Available

7.3.2.1.- MECHANISCHE TESTS

MFLT

Gerät zur Untersuchung des Knickens von Stäben

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

MEBM

Available

7.3.2.1.- MECHANISCHE TESTS

MEBM

Gerät für die Untersuchung der Euler'schen Knickmodi

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.3.2.1.- MECHANISCHE TESTS

MTP

Gerät für Torsion und Biegung

The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...

Available

7.3.2.1.- MECHANISCHE TESTS

MTB

Gerät für Torsion

The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...

Available

7.3.2.1.- MECHANISCHE TESTS

MTT

Gerät für Torsionsprüfung (30 Nm)

The Torsion Test Unit (30Nm), "MTT", designed by EDIBON, has a shaft attached to the test specimen where the moment of torsion is measured with strain gauges. By means of an angle measuring sensor it is possible to determine the torsion angle....

MTTU

Available

7.3.2.1.- MECHANISCHE TESTS

MTTU

Gerät für Zugversuche

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...

Available

7.3.2.1.- MECHANISCHE TESTS

MDB

Gerät zur Untersuchung der Durchbiegung in gekrümmten Balken

The Deflection of Curved Bars Unit, "MDB", designed by EDIBON, consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two...

Available

7.3.2.1.- MECHANISCHE TESTS

MFV

Pfeildemonstrator für Balken

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- MECHANISCHE TESTS

MMF

Gerät für Biegemoment und Scherkraft

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- THERMISCHE UND AKUSTISCHE PRÜFUNGEN

TIAC

Gerät für Studie der Akustischen Impedanz/des Akustischen Dämmvermögens, computergesteuert (PC)

The Computer Controlled Acoustic Impedance/Acoustic Insulation Study Unit, "TIAC", designed by EDIBON, enables a detailed and precise analysis of the acoustic response of construction materials and coatings when subjected to incident sound waves....

COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC

TDRC

Available

7.3.2.2.- THERMISCHE UND AKUSTISCHE PRÜFUNGEN

TDRC

Gerät zur Demonstration der Lärmkontrolle, computergesteuert (PC)

The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been designed by EDIBON to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a motor...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF BUILDING AND INSULATING MATERIALS UNIT - TCMC

TCMC

Available

7.3.2.2.- THERMISCHE UND AKUSTISCHE PRÜFUNGEN

TCMC

Gerät für Wärmeleitfähigkeit von Bau- und Isoliermaterialien, computergesteuert (PC)

The Computer Controlled Thermal Conductivity of Building and Insulating Materials Unit, "TCMC", designed by EDIBON, is a unit employed to measure thermal conductivity of low-conductivity materials, such as insulating materials.This unit is a...

PRACTICAL CASTING KIT: MODELING AND SAND CASTING OF SOLID PARTS - MCAM

MCAM

Available

7.3.3.1.- GIESSEREI

MCAM

Praktisches Gießset: Modellieren und Gießen von Massivteilen in Sandformen

The Practical Casting Kit: Modeling and Sand Casting of Solid Parts, "MCAM", developed by EDIBON, is an essential educational tool for teaching the fundamentals of casting. This kit allows students to develop practical skills in molding and...

PRACTICAL CASTING KIT: MODELING AND SAND CASTING OF HOLLOW PARTS - MCLA

MCLA

Available

7.3.3.1.- GIESSEREI

MCLA

Praktisches Gießset: Modellieren und Gießen von Hohlteilen in Sandformen

The Practical Casting Kit: Modeling and Sand Casting of Hollow Parts, "MCLA", developed by EDIBON, is an essential educational tool for teaching the fundamentals of casting. This kit allows students to develop practical skills in molding and...

PRACTICAL CASTING KIT: CENTRIFUGAL CASTING - MCEN

MCEN

Available

7.3.3.1.- GIESSEREI

MCEN

Praktisches Gießset: Zentrifugalguss

The Practical Casting Kit: Centrifugal Casting, "MCEN", designed by EDIBON, is an essential educational unit for teaching the fundamentals of centrifugal casting. This unit enables students to develop practical skills in centrifugal casting...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS