PLCHMI IIoT Local / Remote Control und Monitoring mit HMI

IIOT LOCAL/REMOTE CONTROL AND MONITORING WITH HMI - PLCHMI

INNOVATIVE SYSTEME

The expansion for PLC and HMI, "PLCHMI", is the PLC-HMI set designed by EDIBON. Its objective is to work together with any other EDIBON unit that carries out the control of a process. It allows the user to operate and control EDIBON unit from a HMI and/or from the EDIBON SCADA software.

Allgemeine Beschreibung anzeigen

ÄHNLICHE NEUIGKEITEN

Setting up at Puerto Rico University
Setting up at Puerto Rico University
Today we want to show you the installation that we have had the honor of making in the Chemistry and Unit Operations Laboratory of the Puerto Rico University (UPR). With these new units, we hope that students in the chemistry department can learn the concepts in a practical way.
Lesen Sie mehr
Setting up at Tennessee Tech University
Setting up at Tennessee Tech University
We are pleased to announce our latest installation at Tennessee Tech University - Cookeville, TN (USA), specifically for the department of Chemical Engineering. It has been a pleasure to be part of this project to help students and researchers to establish theoretical knowledge through practice.
Lesen Sie mehr
Setting up at Sevilla University
Setting up at Sevilla University
We are sharing with you a very important installation that we have carried out at the energy engineering department of the Higher Technical School of Engineering of the Sevilla University. There, we have installed our Computer Controlled Air Conditioning Unit with Climatic Chamber and Water...
Lesen Sie mehr

ALLGEMEINE BESCHREIBUNG

The expansion for PLC and HMI, "PLCHMI", is a system composed of an interface that includes PLC modules such as CPU, digital I/O module, analog I/O module, communications module, etc. and a control box with HMI display (required elements (at least one): "PLCHMI-TS", "PLCHMI-TS15" and/or "PLCHMI-TS21").

The PLC interface is the module that contains the PLC controller, different analog and digital I/O modules and the necessary communication modules to communicate with different devices such as HMI, PC, tablet, etc. To communicate with the HMI and/or a PC, the unit has two Ethernet ports. There is also a SCSI connector to connect the PLC interface with unit that carries out process control. In addition, the PLC interface could be provided with any other connector or communication port (USB, DB-9 or DB-25 serial connector, etc.) to establish a communication between the expansion and the process control unit.

The HMI control box contains a touch panel (required elements (at least one): "PLCHMI-TS", "PLCHMI-TS15" and/or "PLCHMI-TS21") to monitor and control the process control unit. By means of the HMI screen the variables and results of the process can be visualized graphically as well as to control the different actuators. Communication with the control interface is via Ethernet.

QUALITÄT

KUNDENDIENST

Informationen anfordern