2.- ELEKTRONIK

Elektronik ist der Zweig der Physik, der sich auf das Verhalten von Elektronen konzentriert. In der Technik ist Elektronik der Teil, der elektronische Schaltkreise studiert und entwickelt, so dass die durch sie zirkulierenden Elektronen das von den Spezifikationen der Anwendung geforderte Verhalten haben.

Mehr sehen

Elektronik war im 20. Jahrhundert eine der am weitesten entwickelten Disziplinen, die von einer sehr begrenzten Anwendung als Stromversorgung zu einem großen Einfluss auf die Gesellschaft geführt hat. Einige Beispiele für elektronische Schlüsselanwendungen zum Verständnis dieses großen Einflusses sind die Sensoren und Messgeräte aller Arten von physikalischen Größen wie Druckniveau, Durchflussniveau und Temperaturmessung, die Verwendung von elektronischen Verstärkern und Filtern, die Entwicklung von integrierten Schaltungen, Mikroprozessoren und persönlichen Computern, die Entwicklung von Transistoren von verschiedenen Technologien wie MOSFET, JFET, BJT, IGBT, usw.

Elektronikanwendungen sind nahezu endlos, und jedes Jahr werden neue Beiträge verbessert und hinzugefügt. Je nach Anwendung der elektronischen Schaltungen werden die folgenden Gruppen unterschieden: analoge Elektronik und digitale Elektronik je nachdem, ob binär oder analog signale verwendet werden, Leistungselektronik je nachdem, ob hohe elektrische Ströme und elektrische Spannungen verwendet werden, elektronische Instrumentierung je nachdem, ob sie für elektronische Messungen von physikalischen Grössen usw. Verwendet werden.

Die Zukunft der Elektronik konzentriert sich auf die Miniaturisierung von elektronischen Komponenten und erhöht deren Effizienz und Geschwindigkeit. In dieser Arbeit ist die Entdeckung revolutionärer neuer Materialien, wie z.B. Graphen oder Silizen von zentraler Bedeutung.

Siehe Produkte
Verwandte Materialien
ELEKTRONIK UNTERKATEGORIE DER

2.1.- STROMVERSORGUNG, MESSGERÄTE UND ZUBEHÖR

Die elektronische Laborausrüstung ist der Satz von Instrumenten, der für die Durchführung der Experimente in einer praktischen Sitzung der Elektronik erforderlich ist. Die Eigenschaften der Ausrüstung hängen vom theoretischen Niveau des auszurüstenden Labors ab, sei es ein technisches Gymnasium,...
Sehen

2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

Die elektronische Entwicklungsphase einer Vorrichtung ist eine Gruppe von Stufen, die durchgeführt wird, um ein Produkt zu erhalten, das die erforderlichen Spezifikationen erfüllt.Die charakteristischsten Phasen jeder Entwicklung elektronischer Geräte sind: Definition der Gerätespezifikationen,...
Sehen

2.3.- THEORETISCH - PRAKTISCHE GRUNDLAGEN

Die elektronischen Grundlagen sind die Gesamtheit der Kenntnisse, die darauf abzielen, dem Studenten eine solide Basis zu bieten, um die allgemeine Funktionsweise der gebräuchlichsten elektronischen Schaltungen und die individuelle Funktion der elektronischen Komponenten, aus denen sie sich...
Sehen

2.4.- INDUSTRIELLE ELEKTRONIK

Die Industrieelektronik ist ein Teilgebiet der Elektrotechnik, das sich mit elektronischen Systemen für den industriellen Einsatz befasst, d. h. mit elektronischen Geräten, die in der Industrie verwendet werden. Einer der wichtigsten Zweige der Industrieelektronik ist die Leistungselektronik, die...
Sehen

2.5.- AUTOMOBILELEKTRONIK

Automobilelektronik ist der Zweig der Elektronikingenieurwesen, der sich ausschließlich auf die Entwicklung von elektrischen und elektronischen Systemen konzentriert, die speziell für den Einbau in Autos entwickelt wurden. Alle in der Automobilelektronik entwickelten Systeme sind so angepasst,...
Sehen

ELEKTRONIK SYSTEME FÜR TECHNISCHE AUSBILDUNG

37 - 72 von 122 Artikel(n)
ROTATIONAL SPEED & POSITION CONTROL - M47
  • M47
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE

M47

Drehzahl- und Positionssteuerung

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...
SOUND MEASUREMENTS - M48
  • M48
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE

M48

Tonmessungen

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.
APPLICATIONS OF TEMPERATURE AND PRESSURE MODULE - N-M49
  • N-M49
Available
2.3.5.- INSTRUMENTATION & KONTROLLE

N-M49

Modul für Anwendungen von Temperatur und Druck

A transducer is a device that is capable of transforming or converting a certain type of input energy into a different one at the output. Depending on the application they have, the name itself will indicate the type of conversion it performs, for...
POWER ELECTRONICS MODULE - N-M9
  • N-M9
Available
14.2.1.6.- LEISTUNGSELEKTRONIK

N-M9

Modul für Leistungselektronik

Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...
POWER SUPPLIES MODULE - N-M5
  • N-M5
Available
14.2.1.6.- LEISTUNGSELEKTRONIK

N-M5

Modul für Stromversorgungen

With the Power Supplies Module "N-M5", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.In...
BASIC ELECTRONICS AND ELECTRICITY ASSEMBLY KITS: - M-KITS
  • M-KITS
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M-KITS

Elektronik- und Elektrobaukästen:

The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.
OWN DEVELOPMENT MODULE - N-M15
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

N-M15

Modul für Eigene Entwicklungen

Zubehör von M-KITS
The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...
SEMICONDUCTORS I KIT - M3/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M3/KIT

Halbleiter-Kit I

Zubehör von M-KITS
With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...
SEMICONDUCTORS II KIT - M4/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M4/KIT

Halbleiter-Kit II

Zubehör von M-KITS
With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".
POWER SUPPLIES KIT - M5/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M5/KIT

Stromversorgungs-Kit

Zubehör von M-KITS
With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.
OSCILLATORS KIT - M6/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M6/KIT

Oszillator-Kit

Zubehör von M-KITS
With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.
OPERATIONAL AMPLIFIERS KIT - M7/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M7/KIT

Operationsverstärker-Kit

Zubehör von M-KITS
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
FILTERS KIT - M8/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M8/KIT

Filter-Kit

Zubehör von M-KITS
With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...
POWER ELECTRONICS KIT - M9/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M9/KIT

Leistungselektronik-Kit

Zubehör von M-KITS
With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.
DIGITAL SYSTEMS AND CONVERTERS KIT - M10/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M10/KIT

System- und Digitalwandler-Kit

Zubehör von M-KITS
With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.
OPTOELECTRONICS KIT - M14/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M14/KIT

Optoelektronik-Kit

Zubehör von M-KITS
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M16/KIT

Elektrische Netzwerk-Kit

Zubehör von M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
THREE-PHASE CIRCUITS KIT - M18/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M18/KIT

Dreiphasen-Schaltungs-Kit

Zubehör von M-KITS
The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.
WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC
  • SPC
Available
14.2.2.- INSTRUMENTATION & KONTROLLE

SPC

Wiegesystem mit Datenerfassung über Computer (PC)

The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
PRESSURE SENSORS CALIBRATION SYSTEM - SCSP
  • SCSP
Available
14.2.2.- INSTRUMENTATION & KONTROLLE

SCSP

System zur Kalibrierung von Drucksensoren

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS
  • BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS

Modulares System für die Sensorstudie

The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BSPC

Basis-Einheit für BS, Computergesteuert (PC)

Zubehör von BS
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
BASE UNIT FOR BS - BSUB
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BSUB

Basis-Einheit für BS

Zubehör von BS
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS1

Modul für Schwingungs- und/oder Deformationsprüfungen

Zubehör von BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
TEMPERATURE TEST MODULE - BS2
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS2

Modul für Temperaturprüfungen

Zubehör von BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
Informationen anfordern