2.3.- THEORETISCH - PRAKTISCHE GRUNDLAGEN

Die elektronischen Grundlagen sind die Gesamtheit der Kenntnisse, die darauf abzielen, dem Studenten eine solide Basis zu bieten, um die allgemeine Funktionsweise der gebräuchlichsten elektronischen Schaltungen und die individuelle Funktion der elektronischen Komponenten, aus denen sie sich zusammensetzen, zu analysieren und zu verstehen.

Mehr sehen

Der Erwerb einer guten theoretischen Basis in einer so spezialisierten Disziplin wie Elektronik ist ein notwendiger Schritt für den nachfolgenden Entwurf und die Entwicklung komplexer elektronischer Systeme. Da Elektronik auch ein Zweig von Engineering ist, haben viele der theoretischen Konzepte eine direkte praktische Anwendung, was das Verständnis der Konzepte für den ElektronikStudenten wesentlich erleichtert, wenn der theoretische Unterricht mit einem zugehörigen praktischen Beispiel verbunden wird.

Die ElektronikenFundamentalwerke decken eine Vielzahl von Themen ab, darunter die Analyse elektronischer Schaltungen (unter Verwendung von Gleichungen und Verfahren wie Ohm'sches Gesetz, Kirchhoff'sche Schaltkreisgesetze, Thévenin'sches Theorem, das Superpositionstheorem, die Transformation des analysierten Schaltkreises in einen einfacheren Äquivalenzschaltkreis, etc.), die Untersuchung der Basiskomponenten (Widerstände, Induktivitäten, Kondensatoren, Transistoren verschiedener Technologien, Dioden, Thyristoren, Logikgatter, usw. ) und eine Reihe von Schaltungen, die nach Funktionalität gruppiert sind (Spannungsstromversorgung und Stromversorgung, Tiefpass- und Hochpassfilter, Verstärkerschaltungen, Widerstandsschaltungen, verschiedene Transistor-Polarisationsschaltungen, Einführung inDigitalschaltungen, Logikschaltungen, etc.).

Siehe Produkte
THEORETISCH - PRAKTISCHE GRUNDLAGEN UNITS
13 - 24 von 31 Artikel(n)
DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11
  • N-M11
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M11
Digital Electronics Fundamentals Module
Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...
BASIC COMBINATIONAL CIRCUITS MODULE - N-M12
  • N-M12
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M12
Basic Combinational Circuits Module
A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...
BASIC SEQUENTIAL CIRCUITS MODULE - N-M13
  • N-M13
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M13
Basic Sequential Circuits Module
Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...
SEMICONDUCTORS I MODULE - N-M3
  • N-M3
Available
14.2.1.4.- HALBLEITER
N-M3
Semiconductors I Module
Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...
SEMICONDUCTORS II MODULE - N-M4
  • N-M4
Available
14.2.1.4.- HALBLEITER
N-M4
Semiconductors II Module
To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...
OPTOELECTRONICS MODULE - N-M14
  • N-M14
Available
14.2.1.4.- HALBLEITER
N-M14
Optoelectronics Module
Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...
ELECTRONICS FOR MOTORS AND GENERATORS UNIT - M99-6
  • M99-6
Available
2.3.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
M99-6
Motoren, Generatoren und Steuerungseinheit
The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...
ANALOG CIRCUITS UNIT - M99
  • M99
Available
2.3.2.- ANALOGE ELEKTRONIK
M99
Erweiterungseinheit
The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...
RESISTANCE TRANSDUCERS - M41
  • M41
Available
2.3.5.- INSTRUMENTATION & KONTROLLE
M41
Widerstandsgeber
This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...
APPLICATIONS OF LIGHT - M44
  • M44
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M44
Einwirkung von Licht
This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...
LINEAR POSITION AND FORCE - M45
  • M45
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M45
Lineare Position und Kraft
Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...
ENVIRONMENTAL MEASUREMENTS - M46
  • M46
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M46
Umweltmesstechnik
Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...
Informationen anfordern