2.- ELETRÔNICA

Electrónica é o ramo da física centrado no comportamento dos electrões. Em engenharia, electronics é a parte que estuda e desenvolve circuitos electrónicos para que os electrões que circulam através deles tenham o comportamento exigido pelas especificações da aplicação.

Ver mais

Electrónica tem sido uma das disciplinas mais desenvolvidas ao longo do século XX, passando de ter uma aplicação muito limitada como a ter um grande impacto na sociedade. Alguns exemplos de aplicações electrónicas chave para compreender esta grande influência são a sensores e metros de todos os tipos de quantidades físicas, tais como nível de pressão, nível de fluxo e medição de temperatura, a utilização de amplificadores electrónicos e filtros, o desenvolvimento de circuitos integrados, microprocessadores e pessoal computadores, o desenvolvimento de transistores de diferentes tecnologias tais como MOSFET, JFET, BJT, IGBT, etc.

Aplicações electrónicas são quase infinitas, e novas contribuições são melhoradas e acrescentadas todos os anos. Dependendo da aplicação do circuitos electrónicos, os seguintes grupos são diferenciados: electrónica analógica e electrónica digital dependendo se binário ou análogosinais são utilizados, electrónica de potência dependendo de serem ou não utilizadas eléctrica de correntes e tensões eléctricas, instrumentação electrónica dependendo de serem ou não utilizadas medidas eléctricas de quantidades físicas, etc.

A futuro da electrónica centra-se na miniaturização de componentes electrónicos, aumentando a sua eficiência e velocidade. Neste trabalho, a descoberta de revolucionários novos materiais, tais como graphene ou silicene, é de importância fundamental.

Ver produtos
Materiais Relacionados
ELETRÔNICA SUBCATEGORIES

2.1.- FONTES DE ALIMENTAÇÃO, EQUIPAMENTOS DE MEDIÇÃO E ACESSÓRIOS

A equipamento electrónico de laboratório é o conjunto de instrumentos necessários para realizar a experimentação numa sessão prática de electrónica. As características do equipamento dependerão do nível teórico do laboratório a equipar, quer se trate de um escola técnica, de um escola...
Ver

2.2.- KITS DE MONTAGEM DE CIRCUITOS

A fase de desenvolvimento electrónico de um dispositivo é um grupo de fases levadas a cabo para obter um produto que cumpre as especificações exigidas.As fases mais características de qualquer desenvolvimento de dispositivo electrónico são: definição das especificações do equipamento, concepção...
Ver

2.3.- FUNDAMENTOS TEÓRICO-PRÁTICOS

A fase de desenvolvimento electrónico de um dispositivo é um grupo de fases levadas a cabo para obter um produto que cumpre as especificações exigidas.As fases mais características de qualquer desenvolvimento de dispositivo electrónico são: definição das especificações do equipamento, concepção...
Ver

2.4.- ELETRÔNICA INDUSTRIAL

A eletrónica industrial é um ramo da engenharia eletrónica que se centra em sistemas electrónicos industriais, ou seja, equipamentos electrónicos utilizados na indústria. Um dos ramos mais importantes da eletrónica industrial é a eletrónica de potência, que se ocupa do desenvolvimento de...
Ver

2.5.- ELETRÔNICA AUTOMOTIVA

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
Ver
ELETRÔNICA UNITS
Mostrando 61-90 de um total de 122 produto(s)
OPTOELECTRONICS KIT - M14/KIT
Available
2.2.- KITS DE MONTAGEM DE CIRCUITOS
M14/KIT
Kit de Optoeletrônica
Acessório de M-KITS
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- KITS DE MONTAGEM DE CIRCUITOS
M16/KIT
Kit de Redes Elétricas
Acessório de M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
THREE-PHASE CIRCUITS KIT - M18/KIT
Available
2.2.- KITS DE MONTAGEM DE CIRCUITOS
M18/KIT
Kit de Circuitos Trifásicos
Acessório de M-KITS
The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.
PRESSURE SENSORS CALIBRATION SYSTEM - SCSP
  • SCSP
Available
14.2.2.- INSTRUMENTAÇÃO E CONTROLE
SCSP
Sistema de Calibração de Sensores de Pressão
The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
MODULAR SYSTEM FOR THE STUDY OF SENSORS - BS
  • BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS
Sistema Modular de Estudo de Sensores
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BSPC
Unidade Base para BS, Controlada por Computador (PC)
Acessório de BS
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
BASE UNIT FOR BS - BSUB
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BSUB
Unidade Base para BS
Acessório de BS
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS1
Módulo de Ensaios de Vibração e/ou Deformação
Acessório de BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
TEMPERATURE TEST MODULE - BS2
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS2
Módulo de Ensaios de Temperatura
Acessório de BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
PRESSURE TEST MODULE - BS3
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS3
Módulo de Ensaios de Pressão
Acessório de BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
FLOW TEST MODULE - BS4
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS4
Módulo de Ensaios de Vazão
Acessório de BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
OVENS TEST MODULE - BS5
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS5
Módulo de Ensaios de Fornos
Acessório de BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
LIQUID LEVEL TEST MODULE - BS6
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS6
Módulo de Ensaios de Nível de Líquidos
Acessório de BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
TACHOMETER TEST MODULE - BS7
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS7
Módulo de Ensaios de Tacômetro
Acessório de BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
PROXIMITY TEST MODULE - BS8
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS8
Módulo de Ensaios de Proximidade
Acessório de BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
PNEUMATIC TEST MODULE - BS9
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS9
Módulo de Ensaios de Pneumática
Acessório de BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
LIGHT TEST MODULE - BS10
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS10
Módulo de Ensaios de Iluminação
Acessório de BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
SAIT
Equipamento de Transdutores e Instrumentação
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-BB
Módulo de Viga e Esfera
Acessório de RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-SM
Módulo de Servomotor CC
Acessório de RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-PI
Módulo de Controle de Pêndulo Invertido
Acessório de RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-CLM
Módulo de Controle de Levitação Magnética
Acessório de RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
Solicitar informação