On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
BSUB Unidade Base para BS
2.4.1.- INSTRUMENTAÇÃO E CONTROLE
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
14.2.2.- INSTRUMENTAÇÃO E CONTROLE
SISTEMAS INOVADORES
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned.
Expansões
NOTÍCIAS RELACIONADAS
Descrição Geral
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and frequency to voltage converters, etc., developed for transducers such as potentiometers, RTD’s, thermocouples, strain gauge bridges, etc.
The BSUB also includes a PID controller, industrial controller, DC dimer and other interesting elements that can be used to introduce students the concepts about process control.
The sensors connect to the base unit and with power supplies through 2 mm terminals located in the front panel of each test module. The test modules may operate independently one of another.
This unit is common for the different test modules type "BS", and can work with one or several modules.
EQUIPAMENTOS SIMILARES DISPONÍVEIS
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BSPC
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
EQUIPAMENTOS COMPLEMENTARES
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
SAIT
Equipamento de Transdutores e Instrumentação
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
14.2.1.3.- ELETRÔNICA DIGITAL
TDS
Equipamento para Estudo do Tratamento Digital do Sinal, Controlado por Computador (PC)
The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...
14.2.1.3.- ELETRÔNICA DIGITAL
CADDA
Equipamento de Conversores A/D e D/A, Controlado por Computador (PC)
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS
Sistema Modular de Estudo de Sensores
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BSPC
Unidade Base para BS, Controlada por Computador (PC)
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS1
Módulo de Ensaios de Vibração e/ou Deformação
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS2
Módulo de Ensaios de Temperatura
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS3
Módulo de Ensaios de Pressão
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS4
Módulo de Ensaios de Vazão
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS5
Módulo de Ensaios de Fornos
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS6
Módulo de Ensaios de Nível de Líquidos
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS7
Módulo de Ensaios de Tacômetro
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...