Top de Vendas

Os mais vendidos

Mostrando 73-108 de um total de 916 produto(s)

DISTRIBUTION TRANSFORMER WITH MOTOR REGULATION APPLICATION - AEL-TI-02

AEL-TI-02

Available

5.1.3.2.- TRASMISSÃO DE ENERGIA

AEL-TI-02

Aplicação de Transformador na Distribuição com Regulação de Motor

The Distribution Transfomer with Motor Regulation Application, "AEL-TI-02", has been designed to study the distribution transformers and its importance in voltage regulation of the medium and low voltage stage of the electrical system. For that,...

THREE-PHASE TRANSFORMER APPLICATION - AEL-TPTT

AEL-TPTT

Available

4.3.1.- APLICAÇÕES DE TRANSFORMADORES

AEL-TPTT

Aplicação de Transformador Trifásico

The Three-Phase Transformer Application, "AEL-TPTT", has been designed by EDIBON to allow the students learn how to carry out different three-phase transformer tests and how they work.With this application the user will study the basic operating...

SINGLE-PHASE TRANSFORMER APPLICATION - AEL-SPTT

AEL-SPTT

Available

4.3.1.- APLICAÇÕES DE TRANSFORMADORES

AEL-SPTT

Aplicação de Transformadores Monofásicos

The Single-Phase Transformer Application, "AEL-SPTT", has been designed by EDIBON to allow the students learn how to carry out different single-phase transformer tests and how they work.With this application the user will be able to learn...

POWER TRANSMISSION APPLICATION WITH SYNCHRONOUS GENERATOR - AEL-TI-07

AEL-TI-07

Available

5.1.3.1.- GERAÇÃO DE ENERGIA

AEL-TI-07

Aplicação de Transmissão de Energia com Gerador Síncrono

Power Transmission Application with Synchronous Generator, "AEL-TI-07", has been designed to study power generation systems based onsynchronous generators. This application is designed to demonstrate the most important operations and maneuvers...

BUILDING CONTROL TRAINING APPLICATION VIA BMS - AEL-KNX-BMS

Acessório de AEL-KNX, AEL-KNX, AEL-KNX

Available

4.2.4.- CONTROLE INTELIGENTE KNX / EIB

AEL-KNX-BMS

Aplicaçao de Treinamento em Controle de Edifícios via BMS

Acessório de AEL-KNX, AEL-KNX, AEL-KNX

The AEL-KNX- is a device designed to provide knowledge and experience in KNX programming practices specifically tailored for building management systems (BMS). This unit serves as a valuable resource for educational and professional institutions...

STAND-ALONE WIND TURBINE APPLICATION - AEL-SWT

AEL-SWT

Available

5.3.3.- ENERGIA EÓLICA

AEL-SWT

Aplicação de Turbina Eólica em Redes Isoladas

The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by Edibon for the training at both the theoretical and practicallevels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...

AE-PLC-SP

Available

6.2.4.- APLICAÇÕES INDUSTRIAIS COM PLC

AE-PLC-SP

Aplicação de um Sistema de Potência

AE-PLC-SM

Available

6.2.4.- APLICAÇÕES INDUSTRIAIS COM PLC

AE-PLC-SM

Aplicação de um Sistema de Rede Inteligente

COMPUTER CONTROLLED HYBRID AND ELECTRIC VEHICLES APPLICATION - AEL-EHVC

AEL-EHVC

Available

2.5.- ELETRÔNICA AUTOMOTIVA

AEL-EHVC

Aplicação de Veículos Híbridos e Elétricos, Controlada por Computador (PC)

The Computer Controlled Hybrid and Electric Vehicles Application, "AEL-EHVC", hhas been developed by EDIBON to facilitate the understanding and analysis of key technologies used in electric and hybrid vehicles within the context of modern electric...

AEL-EEA

Available

4.3.2.1.- MOTORES E GERADORES ELÉTRICOS DE CA

AEL-EEA

Aplicação do Estudo de Alternadores

The Alternator Study Application, "AEL-EEA", has been designed by EDIBON to study the behavior of three-phase synchronous generators with independent excitation.This application consists of a motor-generator group and a series of modules that...

APPLICATION OF AC THREE-PHASE INDUCTION MOTOR OF SQUIRREL CAGE - AEL-ACINA

AEL-ACINA

Available

4.3.2.1.- MOTORES E GERADORES ELÉTRICOS DE CA

AEL-ACINA

Aplicação do Motor CA de Indução Trifásico Gaiola de Esquilo

The Application of AC Three-Phase Induction Motor of Squirrel Cage, "AEL-ACINA", is designed for the study of the main operations performed in the industrial field with three-phase squirrel cage induction motors. The student will learn the most...

PHOTOVOLTAIC APPLICATION WITH CONNECTION TO GRID - AEL-PHVG

AEL-PHVG

Available

5.3.1.- ENERGIA SOLAR FOTOVOLTAICA

AEL-PHVG

Aplicação Fotovoltaica com Ligação à Rede

The Photovoltaic Application with Connection to Grid, "AEL-PHVG", has been designed by EDIBON to study the energy production by photovoltaic panels and how this energy is injected to the grid.In order to learn about solar energy production, the...

STAND-ALONE PHOTOVOLTAIC APPLICATION - AEL-SAPV

AEL-SAPV

Available

5.3.1.- ENERGIA SOLAR FOTOVOLTAICA

AEL-SAPV

Aplicação Fotovoltaica Isolada da Rede

The Stand-Alone Photovoltaic Application, "AEL-SAPV", has been designed by EDIBON to study the energy production obtained with photovoltaic panels.This application will provide the user with the knowledge and the essential skills about the...

SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI

AE-SMI

Available

2.4.2.- SERVOMOTORES ELÉTRICOS

AE-SMI

Aplicação Industrial de Servomotores

The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...

Available

10.3.- APLICAÇÕES E SISTEMAS INDUSTRIAIS

APC

Aplicações de Controle de Processos

The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...

APPLICATIONS OF DC GENERATORS - AEL-DCGEA

AEL-DCGEA

Available

4.3.2.2.- MOTORES E GERADORES ELÉTRICOS DE CC

AEL-DCGEA

Aplicações de Geradores CC

The Application of DC Generator "AEL-DCGEA" is designed for the study of the main operations performed in the industrial field with DC Generators.The student will learn the most important operations of these electrical machines faithfully by using...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M44

Aplicações de Luz

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...

DC ELECTRICAL MOTORS APPLICATIONS - AEL-DCEMT

AEL-DCEMT

Available

4.3.2.2.- MOTORES E GERADORES ELÉTRICOS DE CC

AEL-DCEMT

Aplicações de Motores Elétricos de CC

The DC Electrical Motors Applications, "AEL-DCEMT", has been designed by EDIBON to carry out electrical/mechanical tests for a great variety of DC motors. Such tests allow obtaining the most significant electrical and mechanical characteristics of...

FAN HEATER AND/OR AIR HEAT EXCHANGER - FHAH

FHAH

Available

9.3.- BOMBAS DE CALOR

FHAH

Aquecimento de Ar e/ou Trocador de Ar

The unit Fan Heater and/or Air Heat Exchanger, "FHAH", designed by EDIBON, allows the visualization of a fan heater and its functions as a heat sink. It can also be used as a heat source working in conjunction with a heat pump.The main component...

Acessório de MEMT

Available

7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)

MEMT-4

Atrito por Rolamento em Rodas

Acessório de MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC

PBAC

Available

8.7.1.- BOMBAS

PBAC

Banco de Bomba Axial, Controlado por Computador (PC)

The Computer Controlled Axial Pump Bench, "PBAC", has been designed by EDIBON to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve....

COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC

PBEC

Available

8.7.1.- BOMBAS

PBEC

Banco de Bomba de Engrenagens, Controlado por Computador (PC)

The Computer Controlled Gear Pump Bench, "PBEC", designed by EDIBON, is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...

COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC

PBRC

Available

8.7.1.- BOMBAS

PBRC

Banco de Bomba de Pistão, Controlado por Computador (PC)

The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...

ATBB

Available

8.6.- AERODINÂMICA

ATBB

Banco de Ensaios Aerodinâmicos

The Aerodynamic Testing Bench, "ATBB", designed by EDIBON , has two main components: a radial fan with speed control and a working section where the different accessories for the tests are fixed.The radial blower impels the air through an air...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3

TBMC3

Available

7.2.3.- MOTORES

TBMC3

Banco de Ensaios para Motores de 1 Cilindro, 2,2 kW, Controlado por Computador (PC)

The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 7.5 KW - TBMC8

TBMC8

Available

7.2.3.- MOTORES

TBMC8

Banco de Ensaios para Motores de 1 Cilindro, 7,5 kW, Controlado por Computador (PC)

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER AND TWO-CYLINDERS ENGINES, 11 KW - TBMC12

TBMC12

Available

7.2.3.- MOTORES

TBMC12

Banco de Ensaios para Motores de 1 e 2 Cilindros, 11 kW, Controlado por Computador (PC)

The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...

COMPUTER CONTROLLED TEST BENCH FOR FOUR-CYLINDERS ENGINES, 75 KW - TBMC75

TBMC75

Available

7.2.3.- MOTORES

TBMC75

Banco de Ensaios para Motores de 4 Cilindros, 75 kW, Controlado por Computador (PC)

The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC

PBSPC

Available

8.7.1.- BOMBAS

PBSPC

Banco de Teste de Bombas em Série/Paralelo, Controlado por Computador (PC)

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC

PBOC

Available

8.7.1.- BOMBAS

PBOC

Banco de Testes de Multibombas (4 tipos de bombas), Controlado por Computador (PC)

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", designed by EDIBON, allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most...

FME00

Available

8.1.1.- UNIDADES BASE

FME00

Banco Hidráulico

The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...

HYDROSTATICS BENCH & FLUID PROPERTIES - BHI

Available

8.3.- HIDROSTÁTICA

BHI

Banco Hidrostático e Propriedades de Fluídos

The Hydrostatics Bench and Fluid Properties, "BHI", is a compact, mobile and independent unit.There is a water storage tank, to work in a closed system, at the bottom of the bench. The water is distributed by hand pumps from this tank to two upper...

TBCF

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TBCF

Bomba Calorimétrica

Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...

HEAT PUMP + AIR CONDITIONING + REFRIGERATION WITH 2 CONDENSERS AND 2 EVAPORATORS (WATER/AIR) - THAR22B

THAR22B

Available

9.3.- BOMBAS DE CALOR

THAR22B

Bomba de Calor + Ar Condicionado + Refrigeração com 2 Condensadores e 2 Evaporadores (Água/Ar)

The Heat Pump + Air Conditioning + Refrigeration with 2 Condensers and 2 Evaporators (Water/Air)), "THAR22B", has as aim introduce the student to the study of the heat pumps, air conditioning and refrigeration, as well as the analysis and...

COMPUTER CONTROLLED HEAT PUMP + AIR CONDITIONING + REFRIGERATION WITH 2 CONDENSERS AND 2 EVAPORATORS (WATER/AIR) - THAR22C

THAR22C

Available

9.3.- BOMBAS DE CALOR

THAR22C

Bomba de Calor + Ar Condicionado + Refrigeração com 2 Condensadores e 2 Evaporadores (Água/Ar), Controlado por PC

The Computer Controlled Heat Pump + Air Conditioning + Refrigeration with 2 Condensers and 2 Evaporators (Water/Air)), "THAR22C", has as aim introduce the student to the study of the heat pumps, air conditioning and refrigeration, as well as the...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS