Top de Vendas

Os mais vendidos

Mostrando 325-336 de um total de 932 produto(s)

EEICI/300

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEICI/300

Equipamento de Ensaio de Impacto Charpy e Izod de 300Nm

The 300 Nm Charpy and Izod Impact Testing Unit, "EEICI/300", designed by EDIBON, consists of a pendulum supported by bearings with a 900 mm long arm and a clamping system at the starting position of the test. At one end of the pendulum, either the...

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEU/20KN

Equipamento de Ensaio de Materiais Universal

The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...

MTTU

Available

7.3.2.1.- ENSAIOS MECÂNICOS

MTTU

Equipamento de Ensaio de Tração

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...

COMPUTER CONTROLLED TWO-STAGE COMPRESSOR TEST UNIT - HCDEC

HCDEC

Available

8.7.5.- COMPRESSORES

HCDEC

Equipamento de Ensaios de Compressor de Dois Estágios, Controlado por Computador (PC)

The Computer Controlled Two-Stage Compressor Test Unit, "HCDEC", works with compressed air and presents as a principal device a compression bench with two pistons, low and high pressure.This unit presents four circuits or work dispositions which...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEFC

Equipamento de Ensaios de Fadiga, Controlado por Computador (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.1.3.- ESTÁTICA E DINÂMICA

MED

Equipamento de Equilíbrio Dinâmico/Estático

The Static and Dynamic Balancing Unit, "MED", designed by EDIBON, is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

COMPUTER CONTROLLED FLAME PROPAGATION AND STABILITY UNIT - TVPLC

TVPLC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TVPLC

Equipamento de Estabilidade e Propagação de Chama, Controlado por Computador (PC)

The Computer Controlled Flame Propagation and Stability Unit, "TVPLC", is a teaching unit which allows to obtain various flames by changing the quantities of the fuel – comburent mix. The unit is prepared to work with different gaseous fuels, so...

MEASUREMENT AND REGULATION STATION TRAINER - MRST

MRST

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

MRST

Equipamento de Estação de Medição e Regulação

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...

MPCO

Available

7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)

MPCO

Equipamento de Estudo da Distribuição de Pressão em Rolamentos

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC

TEHSC

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

TEHSC

Equipamento de Estudo da Eficiência em um Sistema de Aquecimento, Controlado por Computador (PC)

The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- ENSAIOS ACÚSTICOS E TÉRMICOS

TIAC

Equipamento de Estudo da Impedância Acústica/Isolamento Acústico, Controlado por Computador (PC)

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

COMPUTER CONTROLLED CORROSION STUDY UNIT - EECC

EECC

Available

11.1.9.- TROCA IÔNICA E CORROSÃO

EECC

Equipamento de Estudo de Corrosão, Controlado por Computador (PC)

The Computer Controlled Corrosion Study Unit, "EECC", designed by EDIBON, allows the corrosion simultaneous study up to eight corrosion cells.Each sample for the test is put in such away that unwanted secondary effects are eliminated.The cells...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS