Top de Vendas

Os mais vendidos

Mostrando 649-684 de um total de 917 produto(s)

Available

7.1.2.1.- MECANISMOS

MBI

Mecanismo de Biela

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...

Available

7.1.2.1.- MECANISMOS

MBD

Mecanismo de Biela Deslizante

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...

Available

7.1.2.1.- MECANISMOS

MEX

Mecanismo de Came e Seguidor

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...

Available

7.1.2.1.- MECANISMOS

MDA

Mecanismo de Direção "Ackermann"

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...

Available

7.1.2.1.- MECANISMOS

MUN

Mecanismo de Junta Universal

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...

Available

7.1.2.1.- MECANISMOS

MCA

Mecanismo de Quatro Barras

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...

MBM2

Available

7.1.2.1.- MECANISMOS

MBM2

Mecanismo de Retorno Rápido de Whitworth

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...

Available

7.1.2.1.- MECANISMOS

MME

Mecanismo Geneva de Parada

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...

Available

7.1.2.1.- MECANISMOS

MYE

Mecanismo Scotch Yoke

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M48

Medições Sonoras

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M46

Medidas Meio Ambientais

Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...

TF-LAB

Available

MOBILIARIO TÉCNICO

TF-LAB

Mobiliário para Laboratório

The range of Laboratory Furniture, "TF-LAB", is a varied series of furniture that meets the main needs for storage and support, and teaching in a laboratory. The "TF-LAB" range of products consists of a base unit, hanging cabinet, laboratory table...

COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4

Acessório de TRAMC

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

TRAMC/4

Modelo de Climatização Completo

Acessório de TRAMC

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...

Acessório de HTMC

Available

8.7.3.- TURBINAS

HT-FR

Modelo de Turbina de Fluxo Radial

Acessório de HTMC

Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...

Acessório de HTMC

Available

8.7.3.- TURBINAS

HT-F

Modelo de Turbina Francis

Acessório de HTMC

Acessório de HTMC

Available

8.7.3.- TURBINAS

HT-K

Modelo de Turbina Kaplan

Acessório de HTMC

Acessório de HTMC

Available

8.7.3.- TURBINAS

HT-P

Modelo de Turbina Pelton

Acessório de HTMC

CUTAWAY MODELS OF TRANSMISSION OF MOTION UNITS - CMTM

CMTM

Available

7.4.1.- MODELOS SECCIONADOS

CMTM

Modelos em Cortes de Equipamentos de Transmissão de Movimento

Mechanical transmission is any device that propagates power between two or more elements of a machine. The most common mechanical transmissions are cables, chains, belts, gears, pulleys, friction wheels, friction discs, camshafts,...

N-M7

Available

14.2.1.2.- ELETRÔNICA ANALÓGICA

N-M7

Módulo de Amplificadores Operacionais

Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- ELETRÔNICA DIGITAL

N-M12

Módulo de Circuitos Combinacionais Básicos

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2

N-M2

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M2

Módulo de Circuitos em Corrente Alternada (CA)

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...

DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1

N-M1

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M1

Módulo de Circuitos em Corrente Contínua (CC)

For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- ELETRÔNICA DIGITAL

N-M13

Módulo de Circuitos Sequenciais Básicos

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M18

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M18

Módulo de Circuitos Trifásicos

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

ANALOG/DIGITAL CONVERTERS MODULE - N-M60

N-M60

Available

2.3.3.- ELETRÔNICA DIGITAL

N-M60

Módulo de Conversores Analógico/Digital

Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...

DIGITAL/ANALOG CONVERTERS MODULE - N-M61

N-M61

Available

2.3.3.- ELETRÔNICA DIGITAL

N-M61

Módulo de Conversores Digital/Analógico

Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...

Acessório de M-KITS

Available

2.2.- KITS PARA MONTAGEM DE CIRCUITOS

N-M15

Módulo de Desenvolvimento Próprio

Acessório de M-KITS

The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...

N-M17

Available

14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS

N-M17

Módulo de Eletromagnetismo

Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...

N-M9

Available

14.2.1.6.- ELETRÔNICA DE POTÊNCIA

N-M9

Módulo de Eletrônica de Potência

Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...

Acessório de BS

Available

6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA

BS10

Módulo de Ensaios de Iluminação

Acessório de BS

The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...

Acessório de BS-PLC

Available

6.2.3.- INSTRUMENTAÇÃO E CONTROLE COM PLC

BS10-PLC

Módulo de Ensaios de Iluminação para CLP

Acessório de BS-PLC

The "BS10-PLC" has been designed to study different light measurement techniques and control light intensity through a PLC. This unit is composed of a lamp whose intensity can be controlled according to the voltage applied and a series of...

Acessório de BS

Available

6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA

BS6

Módulo de Ensaios de Nível de Líquidos

Acessório de BS

The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...

Acessório de BS

Available

6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA

BS9

Módulo de Ensaios de Pneumática

Acessório de BS

The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...

Acessório de BS-PLC

Available

6.2.3.- INSTRUMENTAÇÃO E CONTROLE COM PLC

BS9-PLC

Módulo de Ensaios de Pneumática para CLP

Acessório de BS-PLC

The "BS9-PLC" has been designed to study the control and handling techniques of a pneumatic actuator through a PLC. The actuator is a double acting pneumatic cylinder that allows moving a platform. The displacement of the piston axle is detected...

Acessório de BS

Available

6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA

BS3

Módulo de Ensaios de Pressão

Acessório de BS

The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS