Top de Vendas

Os mais vendidos

Mostrando 313-336 de um total de 932 produto(s)

COMPUTER CONTROLLED TIDAL ENERGY UNIT - EMMC

EMMC

Available

5.3.4.- ENERGIA MARINHA

EMMC

Equipamento de Energia por Marés, Controlado por Computador (PC)

Tidal energy is another way to generate electricity extracting energy from the sea. Twice a day big volumes of water rise and fall with the tides.A Tidal Barrage make use of the potential energy in the difference in height (or head) between high...

COMPUTER CONTROLLED WAVES ENERGY UNIT - EOMC

EOMC

Available

5.3.4.- ENERGIA MARINHA

EOMC

Equipamento de Energia por Ondas, Controlado por Computador (PC)

The Computer Controlled Waves Energy Unit, "EOMC", is a unit in scale, designed to study the wave energy and the influence of several variables. The unit consists of a Base Service Unit and Waves Generator "EOMC-UB" and several Modules to be used...

COMPUTER CONTROLLED PHOTOVOLTAIC SOLAR ENERGY UNIT - EESFC

EESFC

Available

5.3.1.- ENERGIA SOLAR FOTOVOLTAICA

EESFC

Equipamento de Energia Solar Fotovoltaica, Controlado por Computador (PC)

The Computer Controlled Photovoltaic Solar Energy Unit, "EESFC", includes equipment that uses the photo-conversion law for the direct conversion of solar radiation into electricity. The absorbed energy is provided by simulated solar radiation,...

EESFB

Available

5.3.1.- ENERGIA SOLAR FOTOVOLTAICA

EESFB

Equipamento de Energia Solar Fotovoltaica.

The sun provides a wide spectrum of solar power. With the exception of the light we see around us every day, the rest of the solar power is invisible. Other parts of the spectrum consist of cosmic beams, gamma rays, x-rays, ultraviolet light,...

COMPUTER CONTROLLED THERMAL SOLAR ENERGY UNIT - EESTC

EESTC

Available

5.3.2.- ENERGIA SOLAR TÉRMICA

EESTC

Equipamento de Energia Solar Térmica, Controlado por Computador (PC)

The Computer Controlled Thermal Solar Energy Unit, "EESTC", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed...

EEST

Available

5.3.2.- ENERGIA SOLAR TÉRMICA

EEST

Equipamento de Energia Solar Térmica.

The Thermal Solar Energy Unit, "EEST", is a system that transforms solar energy into usable thermal energy. It uses the thermosiphon solar system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given...

MTSF

Available

14.1.2.2.- ENGRENAGENS

MTSF

Equipamento de Engrenagem de Rosca Sem-fim

The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...

EEDB

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEDB

Equipamento de Ensaio de Dureza "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EBVR

Equipamento de Ensaio de Dureza "Brinell", "Vickers" e "Rockwell"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", designed by EDIBON, consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness...

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEF

Equipamento de Ensaio de Fadiga

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

EEFCR

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEFCR

Equipamento de Ensaio de Fluência "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEICI

Equipamento de Ensaio de Impacto Charpy e Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

EEICI/300

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEICI/300

Equipamento de Ensaio de Impacto Charpy e Izod de 300Nm

The 300 Nm Charpy and Izod Impact Testing Unit, "EEICI/300", designed by EDIBON, consists of a pendulum supported by bearings with a 900 mm long arm and a clamping system at the starting position of the test. At one end of the pendulum, either the...

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEU/20KN

Equipamento de Ensaio de Materiais Universal

The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...

MTTU

Available

7.3.2.1.- ENSAIOS MECÂNICOS

MTTU

Equipamento de Ensaio de Tração

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...

COMPUTER CONTROLLED TWO-STAGE COMPRESSOR TEST UNIT - HCDEC

HCDEC

Available

8.7.5.- COMPRESSORES

HCDEC

Equipamento de Ensaios de Compressor de Dois Estágios, Controlado por Computador (PC)

The Computer Controlled Two-Stage Compressor Test Unit, "HCDEC", works with compressed air and presents as a principal device a compression bench with two pistons, low and high pressure.This unit presents four circuits or work dispositions which...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- ENSAIOS MECÂNICOS

EEFC

Equipamento de Ensaios de Fadiga, Controlado por Computador (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.1.3.- ESTÁTICA E DINÂMICA

MED

Equipamento de Equilíbrio Dinâmico/Estático

The Static and Dynamic Balancing Unit, "MED", designed by EDIBON, is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

COMPUTER CONTROLLED FLAME PROPAGATION AND STABILITY UNIT - TVPLC

TVPLC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TVPLC

Equipamento de Estabilidade e Propagação de Chama, Controlado por Computador (PC)

The Computer Controlled Flame Propagation and Stability Unit, "TVPLC", is a teaching unit which allows to obtain various flames by changing the quantities of the fuel – comburent mix. The unit is prepared to work with different gaseous fuels, so...

MEASUREMENT AND REGULATION STATION TRAINER - MRST

MRST

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

MRST

Equipamento de Estação de Medição e Regulação

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...

MPCO

Available

7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)

MPCO

Equipamento de Estudo da Distribuição de Pressão em Rolamentos

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC

TEHSC

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

TEHSC

Equipamento de Estudo da Eficiência em um Sistema de Aquecimento, Controlado por Computador (PC)

The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- ENSAIOS ACÚSTICOS E TÉRMICOS

TIAC

Equipamento de Estudo da Impedância Acústica/Isolamento Acústico, Controlado por Computador (PC)

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

COMPUTER CONTROLLED CORROSION STUDY UNIT - EECC

EECC

Available

11.1.9.- TROCA IÔNICA E CORROSÃO

EECC

Equipamento de Estudo de Corrosão, Controlado por Computador (PC)

The Computer Controlled Corrosion Study Unit, "EECC", designed by EDIBON, allows the corrosion simultaneous study up to eight corrosion cells.Each sample for the test is put in such away that unwanted secondary effects are eliminated.The cells...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS