Top de Vendas

Os mais vendidos

Mostrando 397-432 de um total de 941 produto(s)

COMPUTER CONTROLLED FIXED AND FLUIDIZED BED UNIT - LFFC

LFFC

Available

11.1.1.- FLUIDIZAÇÃO

LFFC

Equipamento de Leito Fixo e Fluidizado, Controlado por Computador (PC)

The Computer Controlled Fixed and Fluidised Bed Unit, "LFFC", allows a full study about everything concerning the flow of a fluid through a particles bed, both fixed and fluidised.The unit is composed of two transparent removable columns for the...

AV-WW

Available

2.5.- ELETRÔNICA AUTOMOTIVA

AV-WW

Equipamento de Limpador de Para-brisas Automotivos

The Automotive Wiper Washer Unit, "AV-WW", provides a practical solution to the introduction of the components of the wiper washer system used in the automotive field nowadays.The components included in the "AV-WW" are focused on different...

Available

3.2.1.- TEORIA DA MODULAÇÃO, CODIFICAÇÃO E PROCESSAMENTO DE SINAIS

ELT

Equipamento de Linhas de Transmissão

The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...

COMPUTER CONTROLLED RECYCLE LOOPS UNIT - TRLC

TRLC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TRLC

Equipamento de Loops de Reciclagem, Controlado por Computador (PC)

The Computer Controlled Recycle Loops Unit, "TRLC", has been designed to demonstrate, both visually and experimentally, what a recycleloop is and how it works. It has many teaching applications, among them the performance of mass and energy...

PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMT

Available

8.8.- SISTEMA DE TUBULAÇÃO PARA CONDUÇÃO DE FLUIDOS

AMT

Equipamento de Malha em Tubulações, com Banco Hidráulico (FME00)

The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...

TMHA

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

TMHA

Equipamento de Medição da Umidade do Ar

The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...

HEMP

Available

8.2.- MEDIÇÃO

HEMP

Equipamento de Medição de Pressão

The Pressure Measurement Unit, "HEMP", enables a wide range of investigations and studies into pressure measurement techniques, using Bourdon type manometers and different U-tube manometers, to understand the operation, the characteristics of the...

PRESSURE MEASUREMENT AND CALIBRATION UNIT - TMCP

TMCP

Available

8.2.- MEDIÇÃO

TMCP

Equipamento de Medição e Calibração de Pressão

The Pressure Measurement and Calibration Unit, "TMCP", has been designed to study the concept of pressure and the different methods and techniques used to measure this variable.The dead-weight calibrator consists of a cylinder in which interior a...

COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC

TMTC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TMTC

Equipamento de Medições de Temperatura, Controlado por Computador (PC)

The Computer Controlled Temperature Measurement Unit, "TMTC", designed by EDIBON, works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the...

COMPUTER CONTROLLED MICROWAVE UNIT - EMIC

EMIC

Available

3.2.2.- TEORIA DA ANTENA E DO MICROONDAS

EMIC

Equipamento de Micro-ondas, Controlado por Computador (PC)

The Computer Controlled Microwave Unit, "EMIC", designed by EDIBON, integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc), measure...

Available

3.2.2.- TEORIA DA ANTENA E DO MICROONDAS

EMI

Equipamento de Microondas

The Microwave Unit, "EMI", designed by EDIBON, integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc) and measure devices for...

EMLS

Available

11.1.11.- FILTRAGEM, SEDIMENTAÇÃO E MISTURA

EMLS

Equipamento de Mistura Líquido/Sólido

The Liquid/Solid Mixing Unit, "EMLS," designed by EDIBON, facilitates the study and optimization of mixing liquids and solids. It includes a robust support with a variable speed motor and mechanical connections for installing various agitators....

CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM

CPCM

Available

8.9.1.- MODELOS SECCIONADOS

CPCM

Equipamento de Modelo em Corte de uma Bomba Centrifuga

The Centrifugal Pump Cutaway Model Unit, "CPCM", designed by EDIBON, allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of...

PPCM

Available

8.9.1.- MODELOS SECCIONADOS

PPCM

Equipamento de Modelo em Corte de uma Bomba de Pistão

The Piston Pump Cutaway Model Unit, "PPCM", designed by EDIBON, allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston...

UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

DCCM

Equipamento de Modelo em Corte de uma Embreagem de Múltiplos Discos

Acessório de CMTM

The Unit to Study a Multiple-Disc Clutch Cutaway Model, "DCCM", designed by EDIBON, allows for the study of this Multiple-disk clutch system, used to transmit higher torques in mechanical systems.This type of clutch is widely used in chain tractor...

UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

CGCM

Equipamento de Modelo em Corte de uma Engrenagem de Controle

Acessório de CMTM

The Unit to Study a Control Gear Cutaway Model, "CGCM ", provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

PGCM

Equipamento de Modelo em Corte de uma Engrenagem Planetário

Acessório de CMTM

The Unit to Study a Planetary Gear Cutaway Model, "PGCM", designed by EDIBON, allows for the study of one or more external or planet gears that revolves about a central or sun gear.Planetary gears are widely used in vehicle gearboxes, speed...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

SGCM/2

Equipamento de Modelo em Corte de uma Engrenagem Reta de Dois Estágios

Acessório de CMTM

The Sectioned Model of a Spur Gear Transmission, "SGCM/2", designed by EDIBON, allows for the study of this type of transmission, which is the simplest and most widely used in mechanical systems for motion and power transmission.These systems are...

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

SGCM

Equipamento de Modelo em Corte de uma Transmissão com Engrenagens Retas

Acessório de CMTM

The Unit to Study a Spur Gear Cutaway Model, "SGCM, designed by EDIBON, It is a mitre gear.l power transmission systems.It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

MGCM

Equipamento de Modelo em Corte de uma Transmissão Cônica

Acessório de CMTM

The Unit to Study a Mitre Gear Cutaway Model, "MGCM", designed by EDIBON, allows for the study of this type of transmission, which uses bevel gears to transmit motion between two perpendicular shafts.Due to their ability to change the direction of...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

WGCM

Equipamento de Modelo em Corte de uma Transmissão de Parafuso Sem Fim

Acessório de CMTM

The Unit to Study a Worm Gear Cutaway Model, "WGCM", designed by EDIBON, allows for the study of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and mechanisms that require...

UNIT TO STUDY A VARIABLE SPEED TRAPEZOIDAL BELT DRIVE CUTAWAY MODEL - BDCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

BDCM

Equipamento de Modelo em Corte de uma Transmissão Variável de Correia Trapezoidal

Acessório de CMTM

The Unit to Study a Variable Speed Trapezoidal Belt Drive Cutaway Model, "BDCM", provides insight into the operation of continuously variable transmissions (CVT), where the speed ratio changes progressively and seamlessly, allowing for automatic...

MEBM

Available

7.3.2.1.- ENSAIOS MECÂNICOS

MEBM

Equipamento de Modos de Flambagem de Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

EMDA/A

Available

3.2.1.- TEORIA DA MODULAÇÃO, CODIFICAÇÃO E PROCESSAMENTO DE SINAIS

EMDA/A

Equipamento de Modulações Analógicas

The Analog Modulations Unit, "EMDA/A", designed by EDIBON, is a complete analog communications unit designed to explain the basic concepts of analog modulation. It covers the principles of many of the modulation and demodulation techniques used in...

EMDA/P

Available

3.2.1.- TEORIA DA MODULAÇÃO, CODIFICAÇÃO E PROCESSAMENTO DE SINAIS

EMDA/P

Equipamento de Modulações de Pulso

The Pulse Modulations Unit, "EMDA/P", designed by EDIBON, is a complete modulations unit designed to explain the basic concepts of pulse modulation. It covers the principles of many of the modulation and demodulation techniques used in modern...

EMDA/D

Available

3.2.1.- TEORIA DA MODULAÇÃO, CODIFICAÇÃO E PROCESSAMENTO DE SINAIS

EMDA/D

Equipamento de Modulações Digitais

The Digital Modulations Unit, "EMDA/D", designed by EDIBON, is a complete digital communications Unit designed to explain the basic concepts of digital modulation. It covers the principles of many of the modulation and demodulation techniques used...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- ENSAIOS MECÂNICOS

MMF

Equipamento de Momento Fletor e Força de Corte

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...

UNIT TO STUDY A SHAFT WITH JOURNAL BEARINGS ASSEMBLY - SJBA

SJBA

Available

7.4.2.- MODELOS DESMONTÁVEIS

SJBA

Equipamento de Montagem de Eixo com Rolamentos Deslizantes

The Unit to Study a Shaft with Journal Bearings Assembly, "SJBA", unit consists of two shaft bearings at the ends and a ground steel shaft. The slide bearing consists of two parts, the bearing itself, which is the part of the assembly that is in...

Available

7.4.2.- MODELOS DESMONTÁVEIS

SGA

Equipamento de Montagem de Transmissão com Engrenagens Retas

The Spur Gear Assembly Unit, "SGA", consists of a spur gear with spiral gearing. The gear consists of a single reduction stage and a fixed transmission ratio. It is a gear unit composed of: driving and driven shafts, drive wheel and pinion,...

UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA

MCDA

Available

14.1.2.2.- ENGRENAGENS

MCDA

Equipamento de Montagem de Transmissões Combinadas

The Unit to Study Combined Drives Assembly, "MCDA", designed by EDIBON, allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit,...

UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA

MSDA

Available

14.1.2.2.- ENGRENAGENS

MSDA

Equipamento de Montagem de Transmissões Simples

The Simple Drives Assembly Unit, "MSDA", designed by EDIBON, allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows...

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- ENGRENAGENS

MGTA

Equipamento de Montagem de Trens de Engrenagens

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA

PVFA

Available

8.9.3.- INSTALAÇÕES E MANUTENÇÃO

PVFA

Equipamento de Montagem de Tubulações, Válvulas e Acessórios

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...

Available

7.4.2.- MODELOS DESMONTÁVEIS

CGA

Equipamento de Montagem de uma Engrenagem Combinada

A combined gear is a two or more stage gear with different types of gears. Combined gears play an important role in all kinds of industrial machines. Some of the most noteworthy applications are, for example, in elevators, car industry, transport...

ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP

Acessório de AMP

Available

8.9.2.- MODELOS DESMONTÁVEIS

AMCP

Equipamento de Montagem e Manutenção de uma Bomba Centrífuga

Acessório de AMP

The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...

ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP

Acessório de AMP

Available

8.9.2.- MODELOS DESMONTÁVEIS

AMLCP

Equipamento de Montagem e Manutenção de uma Bomba Centrífuga em Linha

Acessório de AMP

The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS