6.2.5.- APLICAÇÕES DA ESTAÇÃO DE TRABALHO COM PLC

The "AE-PLC-MACT" is an automatic handling station with conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed by one pneumatic handling system that use vacuum technology to move the pieces from the input piece area to the conveyor...

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...

The "AE-SCA" is a SCARA Arm Workstation with the programming console of the robot arm included. The "AE-SCA" also includes a PLC that commands the electrical gripper or the electrical driller.The "AE-SCA" workstation can perform a lot of functions...

The "AE-PLC-SIP" is a quality control workstation commanded by a PLC, which check three characteristics of the input pieces. The workstation checks the color, the type of material and the height of input pieces.The "AE-PLC-SIP" workstation is...

The "AE-PLC-VS" is a quality control system commanded by a PLC. The "AE-PLC-VS" is equipped with a color camera that identifies the pieces on a conveyor belt. Depending on different specification, the system separates the corresponding pieces...

The "AE-PLC-CF" is a sorting workstation commanded by a PLC, which identifies the color and the type of the material of the input pieces and classifies them into three different places. The "AE-PLC-CF" workstation is designed as a modular system...

The "AE-PLC- SLB" is a ball selection system commanded by a PLC. The workstation detects the balls that arrive to the collect position and, depending on the color and material, a cylinder carries the balls to the correct container. The system is...

The "AE-PLC-RFID" is a workstation with RFID identification system. The workstation can write, read and rewrite information in the pieces using the RFID technology. The "AE-PLC-RFID" includes a conveyor system to transport the incoming piece to...

The "AE-PLC-CPD" is a Defective Pieces Sorter Workstation Application commanded by a PLC, which measures the deepness of the hole in the pieces. If the hole has not the correct deepness, the workstation sends the defective pieces to a rejection...

The "AE-PLC-AL" is an automatic Storage Workstation commanded by a PLC that moves the pieces at the desired position in a numbered grid.The "AE-PLC-AL" uses two electric linear actuators and a pneumatic manipulator to configure an automatic three...

The "AE-PLC-ALT" is a Buffer Workstation commanded by a PLC that performs the functions of temporal storage of piece. The buffering function is used in many situations in the real industry for security or between different manufacturing stages.The...

The "AE-PLC-ALB" is an automatic storage workstation for bottles with three degrees of freedom X-Y-Z. The "AE-PLC-ALB" is composed by two linear electrical actuators to move over the X-Y axes, and a pneumatic actuator (Z axis) with a vacuum cup...

The "AE-PLC-ALV" is an automatic storage workstation commanded by a PLC, which moves the pieces from the input area to the desired slot at a vertical storage.The "AE-PLC-ALV" uses two electric and one pneumatic linear actuators to configure an...