AE-PLC-CTCC Estação de Esteira Transportadora CC

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

CC CONVEYOR BELT WORKSTATION - AE-PLC-CTCC

SISTEMAS INOVADORES

The "AE-PLC-CTCC" is a DC powered conveyor system commanded by a PLC.

Ver descrição geral

Catálogo

Especificações de Concurso

Expansões

ICAI

Software Interativo para Educação Assistida por Computador

Descrição Geral

The "AE-PLC-CTCC" is a DC powered conveyor system commanded by a PLC. The "AE-PLC-CTCC" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, DC motor driver and DC motor to a complete control of the conveying.

The "AE-PLC-CTCC" workstation has been designed as a modular system to facilitate the understanding of the equipment operation:

The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
The workstation: is composed by real components used by the industrial automatic conveyor systems such as: capacitive sensors, limit switch sensors, position sensor, etc.

The "AE-PLC-CTCC" workstation that can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

EXERCÍCIOS E PRÁTICAS GUIADAS

EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL

Introduction to flexible manufacturing system (FMS).
Study of the sensor detection.
Manual control of a DC conveyor system.
Automatic control of a DC conveyor system.
Change the parameters of the conveyor system.
Optimize the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

ELEMENTOS NECESSÁRIOS

ELEMENTOS ADICIONAIS RECOMENDADOS

AE-AS

EQUIPAMENTOS SIMILARES DISPONÍVEIS

ELECTRICAL HANDLING WORKSTATION - AE-PLC-MAE

AE-PLC-MAE

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-MAE

Estação Elétrica de Manipulação

The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...

PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN

AE-PLC-MAN

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-MAN

Estação Pneumática de Manipulação

The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take...

PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS

AE-PLC-MPS

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-MPS

Estação de Manipulação de Peças

The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...

AE-PLC-T

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-T

Estação de Transporte Linear

The "AE-PLC-T" is a linear transporting system, which moves the pallets, that carries the pieces, along the system. The unit is configured in a closed loop conveyor powered by an electrical motor, the whole system is commanded by a PLC. The...

AE-PLC-SPO

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-SPO

Estação de Posicionamento

The "AE-PLC-SPO" is a positioning workstation commanded by a PLC that checks the material and dimensions of the incoming pieces to sorting in three different places. The "AE-PLC-SPO" uses a three axis manipulator to pick and place the incoming...

AC CONVEYOR BELT WORKSTATION - AE-PLC-CTCA

AE-PLC-CTCA

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-CTCA

Estação de Esteira Transportadora CA

The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...

PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT

AE-PLC-MACT

Available

6.2.5.4.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE MANIPULAÇÃO DE PEÇAS

AE-PLC-MACT

Estação Pneumática de Manipulação e Esteira de Transporte

The "AE-PLC-MACT" is an automatic handling station with conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed by one pneumatic handling system that use vacuum technology to move the pieces from the input piece area to the conveyor...