14.- ENGENHARIA BIOMÉDICA

Engenharia Biomédica estuda a implementação de conhecimentos de engenharia no campo da biologia e da medicina. A combinação de instrumentação e sistemas de controlo electrónico e a aplicação de algoritmos matemáticos e princípios físicos e químicos permitem Engenharia Biomédica investigar e desenvolver novas técnicas e dispositivos para a resolução de problemas clínicos. Esta disciplina cobre desde a concepção de elementos de diagnóstico e software médico ferramentas até análise fisiológica para o estudo do coração ou do sistema nervoso.

Ver mais

Engenharia Biomédica tem evoluído ao longo dos anos graças aos avanços científicos e tecnológicos. Actualmente, dispositivos como vital signs monitoring systems ou diagnostic devices facilitam o trabalho de cuidados médicos. O desenvolvimento de métodos de análise de imagem tais como raios-X, ultrasonsonsonsons e ressonância magnética permitem o estudo do organismo humano de forma clara e rápida. Além disso, telemedicina e software de gestão hospitalar são utilizados.

O futuro da Engenharia Biomédica tem um longo caminho a percorrer, uma vez que a sociedade actual exige soluções médicas rápidas e eficientes. Os dispositivos electrónicos utilizados no dia-a-dia permitirão pacienteremotomonitorização, seguindo os valores dos sinais vitais para poder analisar os sintomas antes de um problema de saúde e, mesmo, prevenir esse possível problema. Outra tendência da Engenharia Biomédica é a simplificação das ferramentas de laboratório. Sistemas, tais como Lab On a Chip (LOC), integram as funções de laboratório num único chip. Novo robotic, surgerytechniques, novo materiais orgânicos para o fabrico de tecidos artificiais e tecidos regenerativos ou impressão 3D de órgãos artificiais tornará possível resolver necessidades médicas futuras.

Ver produtos
Materiais Relacionados
ENGENHARIA BIOMÉDICA SUBCATEGORIES

14.1.- BIOMECÂNICA

Biomecânica estuda a mecânica do movimento do organismo dos seres vivos, entre eles o movimento do corpo humano. Este estudo abrange desde os movimentos mais simples da vida quotidiana, como o trabalho ou a actividade desportiva, até ao movimento de alguns órgãos internos, como o coração. Para...
Ver

14.2.- ELETRÔNICA BIOMÉDICA

Engenharia Biomédica estuda a aplicação dos conhecimentos de engenharia no campo da biologia e da medicina. Uma das áreas mais relevantes desta engenharia é a Biomedical Electronics, na qual os conceitos de electrónica são aplicados para o desenvolvimento de instrumentação médica.Agora, muitos...
Ver

14.3.- EQUIPAMENTO BIOMÉDICO

Equipamento Biomédico é o conjunto de instrumentos utilizados no campo de medicina, biologia e farmacologia. A concepção de equipamento biomédico está directamente relacionada com Instrumentação Biomédica, em que os instrumentos são concebidos para obter informações, aplicar tratamentos ou...
Ver
ENGENHARIA BIOMÉDICA UNITS
Mostrando 73-108 de um total de 181 produto(s)
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
MART
Equipamento de Arco Tri articulado
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
MFCS3
Equipamento para Estudo de Deformação em Treliças
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
MFL
Equipamento de Arco Biarticulado
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
MPO
Equipamento de Pórtico
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
STH
Equipamento de Hipóteses de Tensões
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
MEPE
Equipamento para Estudo de Problemas de Estabilidade
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
SSM
Equipamento para o Estudo de Tensões em uma Membrana
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MECÂNICA DE ESTRUTURAS
MVV
Equipamento de Vigas Cantiléver
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MDB
Equipamento de Deflexão em Barras Curvas
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MFV
Demonstrador de Deflexão em Vigas
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MFLT
Equipamento de Flambagem em Barras
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MUP
Equipamento Universal de Flambagem
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MMF
Equipamento de Momento Fletor e Força de Corte
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
EFO
Equipamento de Fotoelasticidade
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
MFGE
Equipamento para Determinação do Fator de Extensômetros
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
MEGE
Equipamento de Treinamento de Extensômetros
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
PSD
Equipamento de Demonstração Fotoelástica de Tensões
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEU/20KN
Equipamento de Ensaio de Materiais Universal
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEDB
Equipamento de Ensaio de Dureza "Brinell"
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEFCR
Equipamento de Ensaio de Fluência "Creep"
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEF
Equipamento de Ensaio de Fadiga
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEICI
Equipamento de Ensaio de Impacto Charpy e Izod
The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MEBM
Equipamento de Modos de Flambagem de Euler
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTP
Equipamento de Torção e Flexão
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTB
Equipamento de Torção
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTT
Equipamento de Teste de Torção (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTTU
Equipamento de Ensaio de Tração
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
Solicitar informação