Лидеры продаж

Показано 433-468 из 950

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEICI

Оборудование для Испытаний на Ударную Вязкость по Шарпи и Изоду

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTT

Оборудование для испытания на кручение (30 Нм)

The Torsion Test Unit (30Nm), "MTT", designed by EDIBON, has a shaft attached to the test specimen where the moment of torsion is measured with strain gauges. By means of an angle measuring sensor it is possible to determine the torsion angle....

MTTU

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTTU

Оборудование для испытания на растяжение

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...

EEICI/300

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEICI/300

Оборудование для Испытания на Удар по Методам Шарпи и Изода, 300Нм

The 300 Nm Charpy and Izod Impact Testing Unit, "EEICI/300", designed by EDIBON, consists of a pendulum supported by bearings with a 900 mm long arm and a clamping system at the starting position of the test. At one end of the pendulum, either the...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEF

Оборудование для испытания на усталость

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFC

Оборудование для испытания на усталость, управляемое компьютером (ПК)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

EEFCR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFCR

Оборудование для испытания ползучести

The Creep Testing Unit, "EEFCR", has been designed by EDIBON to the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of...

EEDB

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEDB

Оборудование для испытания твердости "Бринелль"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EBVR

Оборудование для испытания твердости "Бринелль", "Виккерс" и "Роквелл"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", designed by EDIBON, consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness...

PAHS

Available

13.1.- ГИДРОЛОГИЯ И ГИДРОГЕОЛОГИЯ

PAHS

Оборудование для исследования всасывания влаги из почвы

The Soil Moisture Suction Sand Unit, "PAHS", has been designed by EDIBON to study and understand the water retentivity principles in terms of soil suction, the relationship between water retentivity and soil and the derivation of soil moisture...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MVCC

Оборудование для исследования критической скорости, управляемое компьютером (ПК)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

EFAS

Available

13.1.- ГИДРОЛОГИЯ И ГИДРОГЕОЛОГИЯ

EFAS

Оборудование для исследования подземного водного потока

The Ground Water Flow Unit, "EFAS", designed by EDIBON, is composed of a test tank that will be filled with fine grave or sand to construct to develop different models. The entry of water into the tank is done through two inlets, each of them...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MDB

Оборудование для исследования прогиба в изогнутых стержнях

The Deflection of Curved Bars Unit, "MDB", designed by EDIBON, consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two...

COMPUTER CONTROLLED VAPOUR-COMPRESSION REFRIGERATION UNIT - TRCVC

TRCVC

Available

9.4.- ХОЛОДИЛЬНАЯ УСТАНОВКА

TRCVC

Оборудование для компрессионного парового охлаждения, управляемое с компьютера (ПК)

The Computer Controlled Vapour-Compression Refrigeration Unit, "TRCVC", allows the understanding of the vapor-compression refrigeration process by changing the operation of the different parts of the process, and to study the response of the...

COMPUTER CONTROLLED RECIRCULATING AIR CONDITIONING UNIT - TARC

TARC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TARC

Оборудование для кондиционирования воздуха (рециркуляция), управляемое компьютером (ПК)

The Computer Controlled Recirculating Air Conditioning Unit, "TARC", has been designed by EDIBON to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure sensors and flow meters...

COMPUTER CONTROLLED AUTOMOBILE AIR CONDITIONING UNIT - TAAUC

TAAUC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TAAUC

Оборудование для кондиционирования воздуха автомобиля, управляемое компьютером (ПК)

The Computer Controlled Automobile Air Conditioning Unit, "TAAUC", designed by EDIBON, consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car.The number of revolutions of the engine and, therefore,...

TACS

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TACS

Оборудование для кондиционирования воздуха из двух блоков (сплит-система)

The Split Air Conditioner Unit, "TACS", designed by EDIBON allows the study of the operation of a split system air conditioner with heat pump function to heat or cool, apart from other operation modes available.The main element of the Split Air...

COMPUTER CONTROLLED AIR CONDITIONING UNIT WITH CLIMATIC CHAMBER AND WATER CHILLER - TACC

TACC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TACC

Оборудование для кондиционирования воздуха с климатической камерой и водяным охладителем, управляемое ПК

The Computer Controlled Air Conditioning Unit with Climatic Chamber and Water Chiller, "TACC", designed by EDIBON, is an actual air conditioning system with climatic chamber suitable for people and allows the study of the influence of different...

COMPUTER CONTROLLED AIR CONDITIONING UNIT WITH CLIMATIC CHAMBER - TSAC

TSAC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TSAC

Оборудование для кондиционирования воздуха с климатической камерой, управляемое компьютером (ПК)

The Computer Controlled Air Conditioning Unit with Climatic Chamber, "TSAC", designed by EDIBON, is clearly arranged and represents a complete air conditioning system with an air duct and a climatic chamber.The main components of the air...

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MVV

Оборудование для консольных балок

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...

COMPUTER CONTROLLED WATER QUALITY CONTROL UNIT - PCCAC

PCCAC

Available

13.3.- ОЧИСТКА СТОЧНЫХ ВОД

PCCAC

Оборудование для контроля качества воды, управляемое компьютером (ПК)

The Computer Controlled Water Quality Control Unit, "PCCAC", has been designed to use a pump to transfer water from a feed tank to a first transparent tank equipped with an agitator and conductivity sensor. In this tank, conductivity is regulated...

QUCB

Available

11.1.10.- КРИСТАЛЛИЗАЦИЯ И ПИРОЛИЗ

QUCB

Оборудование для кристаллизации

The Crystallization Unit, "QUCB", designed by EDIBON, is a unit for the study of the cooling crystallization process. EDIBON has developed this unit to study the crystallization reaction of those constituents whose solubility changes with the...

COMPUTER CONTROLLED CRYSTALLIZATION UNIT - QUCC

QUCC

Available

11.1.10.- КРИСТАЛЛИЗАЦИЯ И ПИРОЛИЗ

QUCC

Оборудование для кристаллизации, управляемое компьютером (ПК)

The Computer Controlled Crystallization Unit, "QUCC", is a unit for the study of the cooling crystallization process. EDIBON has designed this unit to study the crystallization reaction of those constituents whose solubility changes with the...

TF-LAB

Available

ТЕХНИЧЕСКАЯ МЕБЕЛЬ

TF-LAB

Оборудование для лабораторий

The range of Laboratory Furniture, "TF-LAB", is a varied series of furniture that meets the main needs for storage and support, and teaching in a laboratory. The "TF-LAB" range of products consists of a base unit, hanging cabinet, laboratory table...

LINEAR HEAT CONDUCTION MODULE FOR TSTCB - TXC/CLB

Аксессуар TSTCB

Available

9.6.- ТЕПЛОПЕРЕДАЧА

TXC/CLB

Оборудование для линейной теплопроводности для TSTCB

Аксессуар TSTCB

The Linear Heat Conduction Unit for TSTCB, "TXC/CLB", enables the study of linear heat conduction principles and allows the measurement of the thermal conductivity of different solid conductors and insulators.Bench-top unit to study the principles...

LINEAR HEAT CONDUCTION MODULE FOR TSTCC - TXC/CL

Аксессуар TSTCC

Available

9.6.- ТЕПЛОПЕРЕДАЧА

TXC/CL

Оборудование для линейной теплопроводности для TSTCC

Аксессуар TSTCC

The Linear Heat Conduction Unit for TSTCC, "TXC/CL", allows the study of the principles of linear heat conduction and enables the measurement of the thermal conductivity of different solid conductors and insulators.Bench-top unit to study the...

Available

3.2.1.- КОДИРОВАНИЕ, МОДУЛЯЦИЯ И ТЕОРИЯ ОБРАБОТКИ СИГНАЛА

ELT

Оборудование для линий передачи

The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...

COMPUTER CONTROLLED MAGNETIC SEPARATION UNIT - PSMC

PSMC

Available

11.1.11.- ФИЛЬТРАЦИЯ, СЕДИМЕНТАЦИЯ И СМЕШИВАНИЕ

PSMC

Оборудование для магнитной сепарации, управляемое компьютером (ПК)

The Computer Controlled Magnetic Separation Unit, "PSMC", designed by EDIBON, allows users to understand how a rotating magnetic drum works and, as a result, to sort materials with varying degrees of magnetism.The main components of the unit are:...

BIOMEDICAL MAGNETOTHERAPY TEACHING UNIT - BIMAG

BIMAG

Available

14.3.- БИОМЕДИЦИНСКОЕ ОБОРУДОВАНИЕ

BIMAG

Оборудование для магнитотерапии в биомедицине

The Biomedical Magnetotherapy Teaching Unit, "BIMAG", designed by EDIBON, allows the students to test magnetotherapy, so as to achieve a better knowledge on its functioning and internal mechanism.The Biomedical Magnetotherapy Teaching Unit,...

Available

7.1.3.- СТАТИКА И ДИНАМИКА

MIF

Оборудование для маховика инерции

The Inertia Flywheel Unit, "MIF",designed by EDIBON, consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around...

Available

3.2.2.- АНТЕННЫ И ТЕОРИЯ ЭЛЕКТРОМАГНИТНЫХ ВОЛН СВЧ-ДИАПАЗОНА

EMI

Оборудование для микроволн

The Microwave Unit, "EMI", designed by EDIBON, integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc) and measure devices for...

COMPUTER CONTROLLED MICROWAVE UNIT - EMIC

EMIC

Available

3.2.2.- АНТЕННЫ И ТЕОРИЯ ЭЛЕКТРОМАГНИТНЫХ ВОЛН СВЧ-ДИАПАЗОНА

EMIC

Оборудование для микроволн, управляемое компьютером (ПК)

The Computer Controlled Microwave Unit, "EMIC", designed by EDIBON, integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc), measure...

COMPUTER CONTROLLED BIOMEDICAL PATIENT BIOSIGNALS SIMULATOR - BIPBSC

BIPBSC

Available

14.3.- БИОМЕДИЦИНСКОЕ ОБОРУДОВАНИЕ

BIPBSC

Оборудование для моделирования биосигналов пациентов в биомедицине, управляемое компьютером (ПК)

The Computer Controlled Biomedical Patient Bi-signals Simulator, "BIPBSC", designed by EDIBON, allows students to learn how to interpret and measure the most important biosignals: electrocardiogram (ECG), pulse oximetry (SpO₂), blood pressure...

ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP

Аксессуар AMP

Available

8.9.2.- СЪЁМНЫЕ МОДЕЛИ

AMSP

Оборудование для монтажа и обслуживания винтового насоса

Аксессуар AMP

The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...

ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP

Аксессуар AMP

Available

8.9.2.- СЪЁМНЫЕ МОДЕЛИ

AMDP

Оборудование для монтажа и обслуживания диафрагменного насоса

Аксессуар AMP

Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...

ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP

Аксессуар AMP

Available

8.9.2.- СЪЁМНЫЕ МОДЕЛИ

AMLCP

Оборудование для монтажа и обслуживания инлайнового центробежного насоса

Аксессуар AMP

The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ