MDB Устройство прогиба изогнутого бруска

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА 7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ 14.1.6.- СТРУКТУРНАЯ МЕХАНИКА

ИННОВАЦИОННЫЕ СИСТЕМЫ

The Deflection of Curved Bars Unit, "MDB", is designed to enable the student to determine experimentally the horizontal and vertical displacements at the free end of various curved bars when subject to single concentrated load.

Посмотреть общее описание

Каталог

Спецификации конкурса

Расширения

ICAI

Программное Обеспечение для Интерактивного Компьютерного Обучения

MSAC

Модульная Система Сбора и Управления

ЛАБОРАТОРИИ

7TV

Лаборатория механики, автомобилестроения и материалов для технического и профессионального образования

7HE

Лаборатория механики, автомобилестроения и материалов для высшего образования

НОВОСТИ ПО ТЕМЕ

ОБЩЕЕ ОПИСАНИЕ

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.

The use of two dial gauges placed perpendicularly to each other makes it possible to determine the displacements produced in both directions, up to a maximum range of 10 mm.

The load is applied when hanging a set of weights in the application point. A set of weights in supplied with the unit.

УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ

РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

Study of deflection of curved bars.
Determination of the horizontal and vertical displacements at the free end of various curved bars when subject to single concentrated loads.
Study of the different types of bars geometry and for different positions.
Measurement of the horizontal and vertical displacements produced at the free end of the curved bar.
Effect of the load value in the bar response.
Effect of the bar morphological characteristics in its response to the load.

ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEU/20KN

Устройство тестирования универсальных материалов

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...

EEDB

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEDB

Установка проверки твёрдости по Бринеллю

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EBVR

Прибор для испытания твердости "Brinell", "Vickers" и "Rockwell"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...

EEFCR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFCR

Испытание магнитной вязкости

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFC

Стенд для испытания на усталостные нагрузки, управляемый с ПК

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEF

Испытание усталостных нагрузок

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEICI

Испытание Шарпи и ударные испытания по Изоду

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MUP

Универсальное устройство продольного изгиба

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

MFLT

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MFLT

Машина для изучения смятия стержней

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

MEBM

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MEBM

Оборудование для изучения модов панелирования Эйлера

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTP

Машина кручения и изгиба

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTB

Оборудование для изгиба

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...

КАЧЕСТВО

ПОСЛЕПРОДАЖНОЕ ОБСЛУЖИВАНИЕ

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ