7.3.2.- ИСПЫТАНИЕ МАТЕРИАЛОВ

ПРОДУКТЫ ИСПЫТАНИЕ МАТЕРИАЛОВ

Показано 1-21 из 21

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEU/20KN

Универсальное оборудование для испытания материалов

The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...

EEDB

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEDB

Оборудование для испытания твердости "Бринелль"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...

BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR

EBVR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EBVR

Оборудование для испытания твердости "Бринелль", "Виккерс" и "Роквелл"

The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", designed by EDIBON, consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness...

EEFCR

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFCR

Оборудование для испытания ползучести

The Creep Testing Unit, "EEFCR", has been designed by EDIBON to the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of...

COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC

EEFC

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEFC

Оборудование для испытания на усталость, управляемое компьютером (ПК)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEF

Оборудование для испытания на усталость

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEICI

Оборудование для Испытаний на Ударную Вязкость по Шарпи и Изоду

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

EEICI/300

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

EEICI/300

Оборудование для Испытания на Удар по Методам Шарпи и Изода, 300Нм

The 300 Nm Charpy and Izod Impact Testing Unit, "EEICI/300", designed by EDIBON, consists of a pendulum supported by bearings with a 900 mm long arm and a clamping system at the starting position of the test. At one end of the pendulum, either the...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MUP

Универсальное оборудование для испытания на изгиб

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

MFLT

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MFLT

Оборудование для изучения изгиба стержней

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

MEBM

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MEBM

Оборудование для изучения модов панелирования Эйлера

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTP

Оборудование для изучения кручения и изгиба

The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTB

Оборудование для изучения кручения

The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTT

Оборудование для испытания на кручение (30 Нм)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...

MTTU

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTTU

Оборудование для испытания на растяжение

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MDB

Оборудование для исследования прогиба в изогнутых стержнях

The Deflection of Curved Bars Unit, "MDB", designed by EDIBON, consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MFV

Демонстратор изгиба балок

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MMF

Оборудование для изучения изгибающего момента и поперечной силы

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TIAC

Оборудование для изучения акустического импеданса/звукоизоляции, управляемое компьютером (ПК)

The Computer Controlled Acoustic Impedance/Acoustic Insulation Study Unit, "TIAC", designed by EDIBON, enables a detailed and precise analysis of the acoustic response of construction materials and coatings when subjected to incident sound waves....

COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC

TDRC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TDRC

Оборудование для демонстрации контроля шума, управляемое компьютером (ПК)

The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been designed by EDIBON to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a motor...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF BUILDING AND INSULATING MATERIALS UNIT - TCMC

TCMC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TCMC

Оборудование для теплопроводности строительных и изоляционных материалов, управляемое компьютером (ПК)

The Computer Controlled Thermal Conductivity of Building and Insulating Materials Unit, "TCMC", designed by EDIBON, is a unit employed to measure thermal conductivity of low-conductivity materials, such as insulating materials.This unit is a...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ