Top de Vendas

Os mais vendidos

Mostrando 385-408 de um total de 932 produto(s)

Available

7.1.6.- MECÂNICA DE ESTRUTURAS

STH

Equipamento de Hipóteses de Tensões

The Stress Hypotheses Unit, "STH", has been designed by EDIBON to study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are...

TIAP

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

TIAP

Equipamento de Instalação de Água Potável

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...

TSID

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

TSID

Equipamento de Instalações de Drenagem

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...

ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR

TEIR

Available

9.10.3.- PRÁTICAS DE INSTALAÇÕES E MANUTENÇÃO

TEIR

Equipamento de Instalações Elétricas em Sistemas de Refrigeração

For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...

Available

11.1.9.- TROCA IÔNICA E CORROSÃO

EII

Equipamento de Intercâmbio Iônico

The Ion Exchange Unit, "EII", is a self-contained unit composed by a panel, where two transparent columns are situated in order to put anionic and cationic resins, and also a spare column and a pump, which supplies the efficient from the tanks...

LABORATORY SCALE PRESSURE SWING ADSORPTION UNIT - LPSA

LPSA

Available

11.1.8.- ABSORÇÃO E ADSORÇÃO

LPSA

Equipamento de Laboratório de Adsorção por Pressão Oscilante

The Laboratory Scale Pressure Swing Adsorption Unit, "LPSA", is a laboratory scale plant that allows the performance of adsorption tests using the pressure swing technique.The LPSA unit allows to synthesize a mixture of gases coming from four...

Available

11.1.1.- FLUIDIZAÇÃO

LFF

Equipamento de Leito Fixo e Fluidizado

The Fixed and Fluidized Bed Unit, "LFF", allows a full study about everything concerning the flow of a fluid through a particles bed, both fixed and fluidized.The unit is composed of two transparent removable columns for the simultaneous study of...

COMPUTER CONTROLLED FIXED AND FLUIDIZED BED UNIT - LFFC

LFFC

Available

11.1.1.- FLUIDIZAÇÃO

LFFC

Equipamento de Leito Fixo e Fluidizado, Controlado por Computador (PC)

The Computer Controlled Fixed and Fluidised Bed Unit, "LFFC", allows a full study about everything concerning the flow of a fluid through a particles bed, both fixed and fluidised.The unit is composed of two transparent removable columns for the...

AV-WW

Available

2.5.- ELETRÔNICA AUTOMOTIVA

AV-WW

Equipamento de Limpador de Para-brisas Automotivos

The Automotive Wiper Washer Unit, "AV-WW", provides a practical solution to the introduction of the components of the wiper washer system used in the automotive field nowadays.The components included in the "AV-WW" are focused on different...

Available

3.2.1.- TEORIA DA MODULAÇÃO, CODIFICAÇÃO E PROCESSAMENTO DE SINAIS

ELT

Equipamento de Linhas de Transmissão

The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...

COMPUTER CONTROLLED RECYCLE LOOPS UNIT - TRLC

TRLC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TRLC

Equipamento de Loops de Reciclagem, Controlado por Computador (PC)

The Computer Controlled Recycle Loops Unit, "TRLC", has been designed to demonstrate, both visually and experimentally, what a recycleloop is and how it works. It has many teaching applications, among them the performance of mass and energy...

PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMT

Available

8.8.- SISTEMA DE TUBULAÇÃO PARA CONDUÇÃO DE FLUIDOS

AMT

Equipamento de Malha em Tubulações, com Banco Hidráulico (FME00)

The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...

TMHA

Available

9.2.- VENTILAÇÃO, CALEFAÇÃO, AR CONDICIONADO E ÁGUA QUENTE SANITÁRIA

TMHA

Equipamento de Medição da Umidade do Ar

The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...

HEMP

Available

8.2.- MEDIÇÃO

HEMP

Equipamento de Medição de Pressão

The Pressure Measurement Unit, "HEMP", enables a wide range of investigations and studies into pressure measurement techniques, using Bourdon type manometers and different U-tube manometers, to understand the operation, the characteristics of the...

PRESSURE MEASUREMENT AND CALIBRATION UNIT - TMCP

TMCP

Available

8.2.- MEDIÇÃO

TMCP

Equipamento de Medição e Calibração de Pressão

The Pressure Measurement and Calibration Unit, "TMCP", has been designed to study the concept of pressure and the different methods and techniques used to measure this variable.The dead-weight calibrator consists of a cylinder in which interior a...

COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC

TMTC

Available

9.1.- FUNDAMENTOS E CONCEITOS BÁSICOS DE TERMODINÂMICA

TMTC

Equipamento de Medições de Temperatura, Controlado por Computador (PC)

The Computer Controlled Temperature Measurement Unit, "TMTC", designed by EDIBON, works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the...

COMPUTER CONTROLLED MICROWAVE UNIT - EMIC

EMIC

Available

3.2.2.- TEORIA DA ANTENA E DO MICROONDAS

EMIC

Equipamento de Micro-ondas, Controlado por Computador (PC)

The Computer Controlled Microwave Unit, "EMIC", designed by EDIBON, integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc), measure...

Available

3.2.2.- TEORIA DA ANTENA E DO MICROONDAS

EMI

Equipamento de Microondas

The Microwave Unit, "EMI", designed by EDIBON, integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc) and measure devices for...

EMLS

Available

11.1.11.- FILTRAGEM, SEDIMENTAÇÃO E MISTURA

EMLS

Equipamento de Mistura Líquido/Sólido

The Liquid/Solid Mixing Unit, "EMLS," designed by EDIBON, facilitates the study and optimization of mixing liquids and solids. It includes a robust support with a variable speed motor and mechanical connections for installing various agitators....

CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM

CPCM

Available

8.9.1.- MODELOS SECCIONADOS

CPCM

Equipamento de Modelo em Corte de uma Bomba Centrifuga

The Centrifugal Pump Cutaway Model Unit, "CPCM", designed by EDIBON, allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of...

UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

DCCM

Equipamento de Modelo em Corte de uma Embreagem de Múltiplos Discos

Acessório de CMTM

The Unit to Study a Multiple-Disc Clutch Cutaway Model provides insight into the operation of this clutch system, which uses multiple friction discs to increase torque transmission capacity.This type of clutch is widely used in chain tractor...

UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

CGCM

Equipamento de Modelo em Corte de uma Engrenagem de Controle

Acessório de CMTM

The Unit to Study a Control Gear Cutaway Model provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in precision...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

PGCM

Equipamento de Modelo em Corte de uma Engrenagem Planetário

Acessório de CMTM

The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

Acessório de CMTM

Available

7.4.1.- MODELOS SECCIONADOS

SGCM/2

Equipamento de Modelo em Corte de uma Engrenagem Reta de Dois Estágios

Acessório de CMTM

The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...

PARA MAIS INFORMAÇÕES, CONTACTE-NOS