On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
TECNEL/B Equipamento Básico para o Estudo de Eletrônica de Potência (sem IGBTS), Controlado por Computador (PC) (Conversores: CA/CC+CA/CA)
SISTEMAS INOVADORES
The TECNEL/B is a Unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics.
Expansões
NOTÍCIAS RELACIONADAS
Descrição Geral
The Computer Controlled Basic Teaching Unit for the Study of Power Electronics (no IGBTS). (Converters: AC/DC+AC/AC), "TECNEL/B", is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, AC/AC converters.
This Computer Controlled Unit is supplied with the EDIBON Computer Control System (SCADA), and includes: The unit itself + a Data Acquisition Board + Computer Control, Data Acquisition and Data Management Software Packages, for controlling the process and all parameters involved in the process.
EXERCÍCIOS E PRÁTICAS GUIADAS
EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL
- Single phase half-wave rectifier with load R.
- Single phase half-wave rectifier with load R-L.
- Single-phase half-wave rectifier with R-L load with free wheeling diode (FWD).
- Single-phase full-wave rectifier.
- Three-phase half-wave uncontrolled rectifier.
- Three-phase full-wave uncontrolled rectifier.
- Single-phase half-wave controlled rectifier.
- Single-phase full-wave controlled rectifier.
- Single-phase full-wave controlled rectifier with a DC motor.
- Three-phase full-wave completely controlled.
- Single-phase semi-controlled rectifier.
- Three-phase full-wave semi-controlled rectifier.
- Alternating regulators: R and R-L load.
EXERCÍCIOS MAIS PRÁTICOS A SEREM FEITOS COM A UNIDADE
- Many students view results simultaneously. To view all results in real time in the classroom by means of a projector or an electronic whiteboard.
- Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gains, proportional, integral, derivative parameters, etc. in real time.
- The Computer Control System with SCADA allows a real industrial simulation.
- This unit is totally safe as uses mechanical, electrical/electronic, and software safety devices.
- This unit can be used for doing applied research.
- This unit can be used for giving training courses to Industries even to other Technical Education Institutions.
- Several other exercises can be done and designed by the user.
EQUIPAMENTOS SIMILARES DISPONÍVEIS
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
TECNEL
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
5.1.3.2.- TRASMISSÃO DE ENERGIA
AEL-SVC
Controle de Tensão com SVCs em Sistemas de Transmissão, Controlado por Computador (PC)
The Voltage Control with SVCs in Transmission Systems Application, with SCADA, "AEL-SVC", has been designed to study the most important applications based on thyristor controlled reactor (TCR) and thyristor switched capacitor (TSC). The goal of...
5.1.3.2.- TRASMISSÃO DE ENERGIA
AEL-PWEC
Aplicação de Eletrônica de Potência, com SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
EQUIPAMENTOS COMPLEMENTARES
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
TECNEL
Equipamento para o Estudo da Eletrônica de Potência (com IGBTS), Controlado por Computador (PC)
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CC
Equipamento de Servossistemas Industriais (motores CC) Avançado, Controlado por Computador (PC)
The Computer Controlled Advanced Industrial Servosystem Unit (for DC Motors), "SERIN/CC", allows different practices related to servomotors to be carried out. The unit has different modules to develop different experiments. The modules included in...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CCB
Equipamento Básico de Servossistemas para Motores CC
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CA
Equipamento de Servossistemas Industriais (motores CA) Avançado, Controlado por Computador (PC)
The "SERIN/CA" trainer consists on a Control Interface Box connected to a three-phase motor and to a computer (computer not included). The control interface has a resolver for three-phase motors that controls the speed, position and currentof the...
5.3.3.- ENERGIA EÓLICA
AEL-WPP
Wind Power Plants with Double Feed Induction Generator Application
The Wind Power Plants with Double Feed Induction Generator Application, "AEL-WPP", is used to investigate the design and operation of modern wind power stations. The "AEL-WPP" consists of a prime motor that moves a double-feed induction generator...
5.3.3.- ENERGIA EÓLICA
AEL-WPPIC
Aplicação de Plantas de Energia Eólica com Gerador de Indução, Controlada por Computador (PC)
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated...
5.3.3.- ENERGIA EÓLICA
AEL-WPPI
Aplicação de Centrais Eólicas com Gerador de Indução
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.1.3.2.- TRASMISSÃO DE ENERGIA
AEL-PWEC
Aplicação de Eletrônica de Potência, com SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
AEL-SERIN/CA-1KW
Aplicação de Servomotor Industrial de CA de 1 kW
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...