14.- ENGENHARIA BIOMÉDICA

Engenharia Biomédica estuda a implementação de conhecimentos de engenharia no campo da biologia e da medicina. A combinação de instrumentação e sistemas de controlo electrónico e a aplicação de algoritmos matemáticos e princípios físicos e químicos permitem Engenharia Biomédica investigar e desenvolver novas técnicas e dispositivos para a resolução de problemas clínicos. Esta disciplina cobre desde a concepção de elementos de diagnóstico e software médico ferramentas até análise fisiológica para o estudo do coração ou do sistema nervoso.

Ver mais

Engenharia Biomédica tem evoluído ao longo dos anos graças aos avanços científicos e tecnológicos. Actualmente, dispositivos como vital signs monitoring systems ou diagnostic devices facilitam o trabalho de cuidados médicos. O desenvolvimento de métodos de análise de imagem tais como raios-X, ultrasonsonsonsons e ressonância magnética permitem o estudo do organismo humano de forma clara e rápida. Além disso, telemedicina e software de gestão hospitalar são utilizados.

O futuro da Engenharia Biomédica tem um longo caminho a percorrer, uma vez que a sociedade actual exige soluções médicas rápidas e eficientes. Os dispositivos electrónicos utilizados no dia-a-dia permitirão pacienteremotomonitorização, seguindo os valores dos sinais vitais para poder analisar os sintomas antes de um problema de saúde e, mesmo, prevenir esse possível problema. Outra tendência da Engenharia Biomédica é a simplificação das ferramentas de laboratório. Sistemas, tais como Lab On a Chip (LOC), integram as funções de laboratório num único chip. Novo robotic, surgerytechniques, novo materiais orgânicos para o fabrico de tecidos artificiais e tecidos regenerativos ou impressão 3D de órgãos artificiais tornará possível resolver necessidades médicas futuras.

Ver produtos
Materiais Relacionados
ENGENHARIA BIOMÉDICA SUBCATEGORIES

14.1.- BIOMECÂNICA

Biomecânica estuda a mecânica do movimento do organismo dos seres vivos, entre eles o movimento do corpo humano. Este estudo abrange desde os movimentos mais simples da vida quotidiana, como o trabalho ou a actividade desportiva, até ao movimento de alguns órgãos internos, como o coração. Para...
Ver

14.2.- ELETRÔNICA BIOMÉDICA

Engenharia Biomédica estuda a aplicação dos conhecimentos de engenharia no campo da biologia e da medicina. Uma das áreas mais relevantes desta engenharia é a Biomedical Electronics, na qual os conceitos de electrónica são aplicados para o desenvolvimento de instrumentação médica.Agora, muitos...
Ver

14.3.- EQUIPAMENTO BIOMÉDICO

Equipamento Biomédico é o conjunto de instrumentos utilizados no campo de medicina, biologia e farmacologia. A concepção de equipamento biomédico está directamente relacionada com Instrumentação Biomédica, em que os instrumentos são concebidos para obter informações, aplicar tratamentos ou...
Ver
ENGENHARIA BIOMÉDICA UNITS
Mostrando 91-120 de um total de 181 produto(s)
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
EFO
Equipamento de Fotoelasticidade
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
MFGE
Equipamento para Determinação do Fator de Extensômetros
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
MEGE
Equipamento de Treinamento de Extensômetros
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTICIDADE E EXTENSOMETRIA
PSD
Equipamento de Demonstração Fotoelástica de Tensões
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEU/20KN
Equipamento de Ensaio de Materiais Universal
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEDB
Equipamento de Ensaio de Dureza "Brinell"
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEFCR
Equipamento de Ensaio de Fluência "Creep"
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEF
Equipamento de Ensaio de Fadiga
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- ENSAIOS MECÂNICOS
EEICI
Equipamento de Ensaio de Impacto Charpy e Izod
The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MEBM
Equipamento de Modos de Flambagem de Euler
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTP
Equipamento de Torção e Flexão
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTB
Equipamento de Torção
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTT
Equipamento de Teste de Torção (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- ENSAIOS MECÂNICOS
MTTU
Equipamento de Ensaio de Tração
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
BASIC ELECTRONICS AND ELECTRICITY LABORATORY - LIEBA
  • LIEBA
Available
14.2.1.6.- ELETRÔNICA DE POTÊNCIA
LIEBA
Laboratório de Eletrônica e Eletricidade Básica
We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1
  • N-M1
Available
14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS
N-M1
Módulo de Circuitos em Corrente Contínua (CC)
For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...
ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2
  • N-M2
Available
14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS
N-M2
Módulo de Circuitos em Corrente Alternada (CA)
In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS
N-M16
Módulo de Redes Elétricas
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
ELECTROMAGNETISM MODULE - N-M17
  • N-M17
Available
14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS
N-M17
Módulo de Eletromagnetismo
Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...
THREE-PHASE CIRCUITS MODULE - N-M18
  • N-M18
Available
14.2.1.1.- CONCEITOS BÁSICOS DE LEIS ELÉTRICAS
N-M18
Módulo de Circuitos Trifásicos
Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...
OSCILLATORS MODULE - N-M6
  • N-M6
Available
14.2.1.2.- ELETRÔNICA ANALÓGICA
N-M6
Módulo de Osciladores
Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...
OPERATIONAL AMPLIFIERS MODULE - N-M7
  • N-M7
Available
14.2.1.2.- ELETRÔNICA ANALÓGICA
N-M7
Módulo de Amplificadores Operacionais
Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- ELETRÔNICA ANALÓGICA
N-M8
Módulo de Filtros
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- ELETRÔNICA DIGITAL
N-M60
Módulo de Conversores Analógico/Digital
Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
Solicitar informação