Terlaris

Menampilkan 289 -324 dari 921 produk

N-M4

Available

14.2.1.4.- SEMIKONDUKTOR

N-M4

Modul Semikonduktor II

To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...

ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2

N-M2

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M2

Modul Sirkuit Arus Bolak-Balik (AC)

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...

DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1

N-M1

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M1

Modul Sirkuit Arus Searah (DC)

For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M12

Modul Sirkuit Kombinasional Dasar

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M13

Modul Sirkuit Sekuensial Dasar

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M18

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M18

Modul Sirkuit Tiga Fase

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

DIGITAL SYSTEMS & CONVERTERS MODULE - N-M10

N-M10

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M10

Modul Sistem Digital dan Konverter

Generally, an analog to digital converter is an electronic device that converts an analog voltage input to a digital number.digital number. The digital output can use different coding schemes, such as binary, although some non-electrical or...

CUTAWAY DC PERMANENT MAGNET MOTOR - EMT15-S

EMT15-S

Available

4.4.1.- MODEL BAGIAN

EMT15-S

Motor DC dengan Magnet Permanen yang Dipotong

It includes a Cut away DC permanent magnet motor (EMT15-S) in order to study the different parts of this motor type.

EMT18-S

Available

4.4.1.- MODEL BAGIAN

EMT18-S

Motor DC Tanpa Sikat yang Dipotong

It includes a Cut away DC Brushless motor (EMT18-S) in order to study the different parts of this motor type.

EMT8-S

Available

4.4.1.- MODEL BAGIAN

EMT8-S

Motor Rotor Wound 3PH, Disediakan Secara Seksi

It includes a Cut away asynchronous three-phase motor with wound rotor (EMT8-S) in order to study the different parts of this motor type.

CUTAWAY 3PH SQUIRREL-CAGE MOTOR - EMT7-S

EMT7-S

Available

4.4.1.- MODEL BAGIAN

EMT7-S

Motor Squirrel Cage 3PH, Disediakan Secara Seksi

It includes a Cut away asynchronous three-phase motor of squirrel cage (EMT7-S) in order to study the different parts of this motor type.

EMT12-S

Available

4.4.1.- MODEL BAGIAN

EMT12-S

Motor Universal yang Dipotong

It includes a Cut away universal motor (EMT12-S) in order to study the different parts of this motor type.

CUTAWAY DC INDEPENDENT EXCITATION MOTOR-GENERATOR - EMT1-S

EMT1-S

Available

4.4.1.- MODEL BAGIAN

EMT1-S

Motor-Generator DC dengan Excitation Independen, Dipotong

It includes a Cut away DC independent excitation motor-generator (EMT1-S) in order to study the different parts of this motor type.

INCLINED MULTIMANOMETER WITH 20 MANOMETRIC TUBES OF 250 MM LENGTH - HMM-I1000

Aksesori dari HMM

Available

8.2.- PENGUKURAN

HMM-I1000

Multimanometer miring dengan 20 tabung manometer, panjang 250 mm

Aksesori dari HMM

The Inclined Multimanometer with 20 manometric tubes of 250 mm length, "HMM-I1000," designed by EDIBON, allows measuring and comparing pressures at different points or fluids simultaneously.This facilitates the detailed analysis of pressure...

MULTIMANOMETER WITH 8 MANOMETRIC TUBES OF 500 MM LENGTH, VERTICAL POSITION - HMM-V500

Aksesori dari HMM

Available

8.2.- PENGUKURAN

HMM-V500

Multimanometer vertikal dengan 8 tabung manometer, panjang 500 mm

Aksesori dari HMM

Vertical Multimanometer (8 Manometric Tubes, 500 mm in Length), "HMM-V500," designed by EDIBON, is a multimanometer designed to accurately measure and analyze pressure variations in vertical configurations. It provides valuable data to understand...

COMPUTER CONTROLLED INDUSTRIAL PROCESS CONTROL PLANT (ONLY TEMPERATURE) - CPIC-T

Aksesori dari CPIC

Available

6.1.1.3.- APLIKASI SISTEM INDUSTRI

CPIC-T

Pabrik Kontrol Proses Industri (hanya Suhu), Dikendalikan dari Komputer (PC)

Aksesori dari CPIC

COMPUTER CONTROLLED INDUSTRIAL PROCESS CONTROL PLANT - CPIC

CPIC

Available

6.1.1.3.- APLIKASI SISTEM INDUSTRI

CPIC

Pabrik Kontrol Proses Industri, Dikendalikan dari Komputer (PC)

The Computer Controlled Process Control Plant with Industrial Instrumentation and Service Module (Flow, Temperature, Level and Pressure),"CPIC", is a unit, that offers, on a reasonable laboratory scale, the different process and elements that are...

COMPUTER CONTROLLED GAS WASHING PROCESSING PLANT - PLGC

PLGC

Available

11.1.8.- PENYERAPAN DAN ADSORPSI

PLGC

Pabrik Pencuci Gas, Dikendalikan dari Komputer (PC)

The Computer Controlled Gas Washing Processing Plant, "PLGC", has a water feed tank, from which and by means of a water pump, the water is pumped to the upper part of a column. The solids are added by means of a solid dosing system to the air...

PACKING LINE AND BOTTLING PLANT - N-EM-PELE

N-EM-PELE

Available

6.2.2.1.- SISTEM MANUFAKTUR

N-EM-PELE

Pabrik Pengemasan dan Jalur Botol

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

COMPUTER CONTROLLED WATER TREATMENT PLANT 2 - PPTAC/2

PPTAC/2

Available

13.3.- PENGOLAHAN AIR LIMBAH

PPTAC/2

Pabrik Pengolahan Air (filtrasi dan pertukaran ion), Dikendalikan dari Komputer (PC)

The Computer Controlled Water Treatment Plant 2, "PPTAC/2", allows to study the main principle of the basic operations in the water treatment.These operations are: depth filtration and ion exchange.The general objective of the exercises is to...

COMPUTER CONTROLLED WATER TREATMENT PLANT 1 - PPTAC/1

PPTAC/1

Available

13.3.- PENGOLAHAN AIR LIMBAH

PPTAC/1

Pabrik Pengolahan Air (filtrasi, adsorpsi, dan pertukaran ion), Dikendalikan dari Komputer (PC)

The Computer Controlled Water Treatment Plant 1, "PPTAC/1", designed by EDIBON, allows to study the main principle of the critical operations in the water treatment.These operations are: depth filtration, adsorption and ion exchange.The general...

PILOT PLANT FOR THE PRODUCTION OF CURED PIECES AND SAUSAGES - CA00/CUPS

CA00/CUPS

Available

PABRIK PILOT UNTUK DAGING

CA00/CUPS

Pabrik Pilot Produksi Bagian dan Olahan Daging Asin dan Kering

With the Pilot Plant for the Production of Cured Products and Sausages, "CA00/CUPS", designed by EDIBON, we are able to obtain cured products from untreated meat following the following process:First, the meat that has been weighed and cleaned of...

PILOT PLANT FOR THE PRODUCTION OF COOKED PIECES AND SAUSAGES - CA00/COPS

CA00/COPS

Available

PABRIK PILOT UNTUK DAGING

CA00/COPS

Pabrik Pilot Produksi Bagian dan Olahan Daging Rebus dan Kering

With the Pilot Plant for the Production of Cooked Pieces and Sausages, "CA00/COPS", designed by EDIBON, we are able to obtain cooked products from untreated meat, following the following process:To prepare this type of product, the first step is...

COMPUTER CONTROLLED PROCESS PLANT FOR CITRUS FRUITS WITH ESN EXPANSION - CI00

CI00

Available

12.4.- TANAMAN PILOT

CI00

Pabrik Pilot untuk Buah Jeruk, Dikendalikan dari Komputer (PC) dan Layar Sentuh

COMPUTER CONTROLLED AND TOUCH SCREEN PILOT PLANT FOR FRUIT - FR00

FR00

Available

12.4.- TANAMAN PILOT

FR00

Pabrik Pilot untuk Buah, Dikendalikan dari Komputer (PC) dan Layar Sentuh

COMPUTER CONTROLLED AND TOUCH SCREEN SOLID-LIQUID EXTRACTION PILOT PLANT - SLE00

SLE00

Available

TEKNIK KIMIA

SLE00

Pabrik Pilot untuk Ekstraksi Padatan-Cair, Dikendalikan dari Komputer (PC) dan Layar Sentuh

The Computer Controlled Solid-Liquid Extraction for High Temperature Unit, "SLE00", allows the separation of a solute from its solid matrix by direct contact with a suitable solvent.The unit incorporates five columns that can store up to 18...

PILOT PLANT FOR CO2 ADSORPTION CAPTURE - EDIBON-MOF4AIR

EDIBON-MOF4AIR

Available

LINGKUNGAN

EDIBON-MOF4AIR

Pabrik Pilot untuk Penangkapan CO2 melalui Adsorpsi

The Pilot Plants for CO₂ Capture via Adsorption, "EDIBON-MOF4AIR" seek a new solution to efficiently capture carbon dioxide from power plants and industries. To address this significant issue we currently face, the European Union launched the...

PILOT PLANT FOR CEREAL MALTING - CE00/MA

CE00/MA

Available

PABRIK PILOT UNTUK BUAH-BUAHAN

CE00/MA

Pabrik Pilot untuk Pengepakan Sereal

The Pilot Plant for Cereal Malting, "CE00/MA", is a pilot scale plant that includes all the industrial stages for malt production.This plant includes a steeping tank, a germinator, a dryer-roaster and a deculmer. In addition, it includes the...

PILOT PLANT FOR MILLING AND FLOUR PRODUCTION - CE00/MF

CE00/MF

Available

PABRIK PILOT UNTUK BUAH-BUAHAN

CE00/MF

Pabrik Pilot untuk Penggilingan dan Produksi Tepung

The Computer Controlled and Touch Screen Cereal Pilot Plants, "CE00", are a set of pilot plants capable of carrying out the main processes involved in the treatment of cereal grains, including grain milling, bread and pasta making, and cereal...

COMPUTER CONTROLLED AND TOUCH SCREEN PILOT PLANTS FOR THE GRAPE TREATMENT - UV00

UV00

Available

PABRIK PILOT UNTUK BUAH, SAYURAN, DAN KACANG-KACANGAN

UV00

Pabrik Pilot untuk Pengolahan Anggur, Dikendalikan dari Komputer (PC) dan Layar Sentuh

The Computer Controlled and Touch Screen Pilot Plant for the Grape Treatment, "UV00", designed by EDIBON, is a pilot plant in which the main production processes related to grapes are carried out.GD/CTS. Computer Controlled and Touch Screen Grape...

PILOT PLANT FOR THE PRODUCTION OF PRECOOKED MEAT PRODUCTS - CA00/PM

CA00/PM

Available

PABRIK PILOT UNTUK DAGING

CA00/PM

Pabrik Pilot untuk Produksi Daging Precocinadas

Other accessories are also available to increase the possibilities of each of the pilot plants involved in the different processes.With the Pilot Plant for the Production of Precooked Meat Products, "CA00/PM", designed by EDIBON, it is possible to...

COMPUTER CONTROLLED PROCESS PLANT FOR MEAT WITH ESN EXPANSION - CA00

CA00

Available

PENGOBATAN MAKANAN

CA00

Pabrik Pilot untuk Produksi Daging, Dikendalikan dari Komputer (PC) dan Layar Sentuh

PILOT PLANT FOR THE PRODUCTION OF CHEESE AND COTTAGE - LE00/CC

LE00/CC

Available

PABRIK PILOT UNTUK PRODUK SUSU

LE00/CC

Pabrik Pilot untuk Produksi Keju dan Requesón

The Computer Controlled and Touch Screen Pilot Plants for the Production of Dairy Products, are pilot plants capable of demonstrating, for further research and study, the main processes involved in the dairy treatment industry. That is, from the...