8.9.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.

Lihat Lebih Banyak

Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of Things (IIoT) dan Pabrik Cerdas, adaptasi tersebut dimungkinkan berkat penerapan teknik paling canggih dalam desain fasilitas baru atau dalam renovasi dari yang sudah ada.

Terlepas dari semua kemajuan teknologi dan kontrol menyeluruh yang dilakukan, tidak boleh dilupakan bahwa setiap elemen yang mengambil bagian dalam proses produktif akan menjadi mengalami keausan mekanis dan listrik (tenaga, beban, dll.) dan masa pakainya terbatas. Untuk menghindari kegagalan katastropik, penghentian produksi atau semua jenis proses yang menyiratkan peningkatan waktu non-produktif dan, oleh karena itu, peningkatan biaya, sangatlah penting untuk melakukan pemeliharaanmesin, sistem kelistrikan, dll.

Biasanya, hanya dua jenis pemeliharaan yang dipertimbangkan:

  • Korektif: masalah diselesaikan setelah terjadi.
  • Pencegahan: peninjauan berkala terhadap semua elemen bermasalah tersebut dan penggantinya jika diperlukan.

Jenis pemeliharaan ini melibatkan biaya yang sangat tinggi dan tidak perlu dalam banyak kasus. Saat ini, berkat teknologi yang tersedia, dimungkinkan untuk melakukan pemeliharaan prediktif yang terdiri dari analisis komprehensif dari semua variabel yang berperan dalam semua komponen sistem dan dapat menggantinya pada waktu yang tepat.

Namun, jika lebih banyak kontrol atas kegagalan yang dapat menyebabkan semua komponen mekanis yang dapat aus lebih disukai, ada jenis pemeliharaan lain, yang dikenal sebagai pemeliharaan proaktif. Ini selangkah lebih maju daripada pemeliharaan prediktif, mencari akar masalahnya.

Lihat Produk
PEMASANGAN DAN PEMELIHARAAN UNITS
Menampilkan 1 -30 dari 32 produk
UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM
  • ANVCM
Available
8.9.1.- MODEL BAGIAN
ANVCM
Unit to Study an Angular Needle Valve Cutaway Model
The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- MODEL BAGIAN
BVCM
Unit to Study a Ball Valve Cutaway Model
The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM
  • LNVCM
Available
8.9.1.- MODEL BAGIAN
LNVCM
Unit to Study a Lift Non-return Valve Cutaway Model
The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...
UNIT TO STUDY A NON-RETURN BUTTERFLY VALVE CUTAWAY MODEL - NBVCM
  • NBVCM
Available
8.9.1.- MODEL BAGIAN
NBVCM
Unit to Study a Non-return Butterfly Valve Cutaway Model
The Unit to Study a Non-Return Butterfly Valve Cutaway Model, "NBVCM", allows the students to visualize the inner parts of a butterfly valve, to evaluate the relation with each other accurately and to understand their function.It is a valve to...
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- MODEL BAGIAN
PMFCM
Unit to Study a Pipe Mesh Filter Cutaway Model
The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
UNIT TO STUDY A STRAIGHT-WAY NEEDLE VALVE CUTAWAY MODEL - SNVCM
  • SNVCM
Available
8.9.1.- MODEL BAGIAN
SNVCM
Unit to Study a Straight-way Needle Valve Cutaway Model
The Unit to Study a Straight-Way Needle Valve Cutaway Model, "SNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with...
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- MODEL BAGIAN
WMCM
Unit to Study a Water Meter Cutaway Model
The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM
  • UHCM
Available
8.9.1.- MODEL BAGIAN
UHCM
Unit to Study an Underground Hydrant Cutaway Model
The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...
  • CPCM
Available
8.9.1.- MODEL BAGIAN
CPCM
Centrifugal Pump Cutaway Model Unit
The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
  • GPCM
Available
8.9.1.- MODEL BAGIAN
GPCM
Gear Pump Cutaway Model Unit
The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
  • PPCM
Available
8.9.1.- MODEL BAGIAN
PPCM
Piston Pump Cutaway Model Unit
The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
ASV
Assembly of a Shut-Off Valve Unit
The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMCV
Assembly of a Motorized Control Valve Unit
The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
ACPV
Assembly of a Control Pneumatic Valve Unit
The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMP
Assembly and Maintenance of Pumps
The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMCP
Assembly and Maintenance of a Centrifugal Pump Unit
Aksesori dari AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
ASSEMBLY AND MAINTENANCE OF A MULTISTAGE CENTRIFUGAL PUMP UNIT - AMMCP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMMCP
Assembly and Maintenance of a Multistage Centrifugal Pump Unit
Aksesori dari AMP
The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMSP
Assembly and Maintenance of a Screw Pump Unit
Aksesori dari AMP
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMDP
Assembly and Maintenance of a Diaphragm Pump Unit
Aksesori dari AMP
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMPP
Assembly and Maintenance of a Piston Pump Unit
Aksesori dari AMP
The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...
ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMLCP
Assembly and Maintenance of an In-Line Centrifugal Pump Unit
Aksesori dari AMP
The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...
ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP
  • Aksesori dari AMP
Available
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMGP
Assembly and Maintenance of a Gear Pump Unit
Aksesori dari AMP
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...
PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA
  • PVFA
Available
8.9.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
PVFA
Pipes, Valves and Fittings Assembly Unit
The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...
BACKFLOW PREVENTION TRAINING UNIT - BFPT
  • BFPT
Available
8.9.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
BFPT
Backflow Prevention Training Unit
The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TEV3V
Three-Way Mixing Valve Training Unit
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TEV4V
Four-Way Mixing Valve Training Unit
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TEIS
Sanitary Fittings Training Unit
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TIAP
Drinking Water Installation Unit
The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TPAP
Protection of Drinking Water Training Unit
The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TELT
Pipe Cleaning Training Unit
The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
Meminta informasi