8.- MEKANIKA FLUIDA

Cabang Mekanika Fluida mempelajari hukum perilaku fluida pada diam (fluida statika ) atau dalam gerak (fluida dynamics ) dan proses interaksinya dengan benda padat. Fluida dianggap sebagai zat yang dapat mengalir , dengan kata lain bergerak. Diantaranya terdapat zat cair (air, minyak, alkohol, susu, asam sulfat, bensin) dan gas (udara, oksigen, nitrogen, helium, argon, metana, butana, gas alam).

Lihat Lebih Banyak

Cairan dapat ditemukan di mana saja dalam kehidupan sehari-hari, dari udara yang mengelilingi kita, air di kolam renang dan untuk irigasi, sistem hidrolik yang memungkinkan kita untuk mengerem mobil kita, pemanas atau AC, ke sistem darah kita sendiri. Studi fluida didasarkan pada prinsip terkenal Archimedes dan Pascal, persamaan Bernoulli, Venturi efek atau hukum Darcy , antara lain. Bidang Teknik Mekanika Fluida yang mencari penerapan dipelajari secara empiris dan secara matematis, menyoroti bilangan tak berdimensi seperti Reynolds, Prandtl, Mach dan Froude . Pentingnya prinsip mekanika fluida meninggalkan penemuan-penemuan yang umum, seperti air transfer melalui saluran, maritim dan transportasi udara, mesin hidrolik, termal dan pneumatik, solusi untuk masalah kavitasi atau water hammer dalam pipa, hidrolik dan transmisi pneumatik dan kontrol, dll.

Mengingat relevansi fluida dalam berbagai aplikasi, penting untuk mengetahui sifatnya, yaitu jenis fluida dan mendeskripsikannya berdasarkan properti. Yang paling signifikan adalah: tekanan, suhu, volume, kepadatan, viskositas, kompresibilitas, panas spesifik, ekspansi termal, dan daya larut.

Lihat Produk
Materi Terkait
MEKANIKA FLUIDA SUBCATEGORIES

8.1.- LABORATORIUM MODULER MEKANIK FLUIDA

Hidrolika merupakan salah satu cabang ilmu yang membahas tentang sifat mekanik fluida dan Mekanika Fluida merupakan dasar dari Hidrolika. EDIBON mencoba untuk menanggapi, dengan cara yang sederhana dan praktis, permintaan akademis untuk mengajar dan belajar dasar Mekanika Fluida. Untuk melakukan...
lihat

8.2.- PENGUKURAN

Metrologi adalah ilmu yang mempelajari pengukuran magnitudo. Ini didasarkan pada proses yang berusaha untuk membangun hubungan antara nilai referensi dan objek atau fenomena yang besarannya harus dikuantifikasi dan mendapatkan ekspresi dari pengukuran. Pengukuran harus dapat direproduksi dan...
lihat

8.3.- HIDROSTATIK

Hidrostatika adalah cabang dari mekanika fluida yang mempelajari fenomena dan perilaku terkait yang terjadi ketika fluida berada di dalam wadah dan di sana ada kekuatan yang mengubah keadaan cairan saat diam atau bergerak. Sebaliknya, hidrodinamika mempelajari cairan yang bergerak.Hidrostatika...
lihat

8.4.- VISUALISASI ALIRAN

Aliran fluida dibingkai dalam cabang dinamika fluida. Studi fokus pada kompresi pergerakan fluida, dikondisikan oleh hukum Newton dan kekekalan massa dan energi dan hukum seperti Stokes ', bilangan Reynolds atau Prandt, antara lain.Visualisasi pergerakan dan arah fluida berkat jalur arus dan...
lihat

8.5.- SALURAN HIDROLIK

Air adalah elemen fundamental yang digunakan oleh makhluk hidup dan, sejak zaman kuno, berbagai perangkat telah dikembangkan untuk distribusi dan konsumsi, seperti saluran.Saluran hidraulik atau terbuka atau, sederhananya, saluran didefinisikan sebagai sistem perpipaan yang terbuka ke atmosfer...
lihat

8.6.- AERODINAMIKA

Aerodinamika adalah bagian dari mekanika fluida yang mempelajari gas dalam gerakan dan gaya atau reaksi yang menyebabkan benda yang berinteraksi dengan gas-gas tersebut terkena. Selain pentingnya aerodinamika itu sendiri, nilai kontribusinya terhadap aeronautika harus ditambah. Sesuai dengan...
lihat

8.7.- MESIN FLUIDA

Sebuah aplikasi khusus, area komunikasi dalam mekanika fluida adalah yang bertanggung jawab untuk mempelajari fluida mesin. Mesin fluida adalah perangkat yang mengubah energi fluida yang melewatinya atau mentransfer energi ke fluida. Fluida tersebut dapat berupa gas, uap atau cair.Berdasarkan...
lihat

8.8.- SISTEM PIPA FLUIDA

Dalam teknik, sistem perpipaan fluida didefinisikan sebagai struktur atau konstruksi yang mengangkut fluida dari sumber ke < strong>tujuan. Dua jenis saluran dibedakan: saluran tertutup (pipa, terowongan atau gorong-gorong) dan saluran terbuka (arus alami). Aliran dalam saluran tertutup...
lihat

8.9.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...
lihat
MEKANIKA FLUIDA UNITS
Menampilkan 73 -108 dari 168 produk
COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL - TAS25/100C
  • TAS25/100C
Available
8.6.- AERODINAMIKA
TAS25/100C
Computer Controlled Supersonic Wind Tunnel
The Computer Controlled Supersonic Wind Tunnel, "TAS25/100C", is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Air flows through a vacuum pump or blower...
COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL (THREE BLOWERS) - TAS25/100C-3B
  • TAS25/100C-3B
Available
8.6.- AERODINAMIKA
TAS25/100C-3B
Computer Controlled Supersonic Wind Tunnel (Three Blowers)
The Computer Controlled Supersonic Wind Tunnel (Three Blowers), "TAS25/100C-3B", is an open wind tunnel for the study of theaerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Airflows through three vacuum...
COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250C
  • TA50/250C
Available
8.6.- AERODINAMIKA
TA50/250C
Computer Controlled Aerodynamic Tunnel, 50X250 mm
The Computer Controlled Aerodynamic Tunnel, 50 x 250 mm, "TA50/250C", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan, computer...
AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250
  • TA50/250
Available
8.6.- AERODINAMIKA
TA50/250
Aerodynamic Tunnel, 50X250 mm
The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300C
  • TA300/300C
Available
8.6.- AERODINAMIKA
TA300/300C
Computer Controlled Aerodynamic Tunnel, 300X300 mm
The Computer Controlled Aerodynamic Tunnel, 300 x 300 mm, "TA300/300C", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan, computer...
AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300
  • TA300/300
Available
8.6.- AERODINAMIKA
TA300/300
Aerodynamic Tunnel, 300X300 mm
The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 610 X 915 MM - TA610/915C
  • TA610/915C
Available
8.6.- AERODINAMIKA
TA610/915C
Computer Controlled Aerodynamic Tunnel, 610X915 mm
Aerodynamics is the part of fluid mechanics that studies the motion of gases and the forces or reactions to which the bodies they interact with are subjected. Aerodynamics is not only important by itself but also as a complement to aeronautics....
COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 1000 X 1000 MM - TA1000/1000C
  • TA1000/1000C
Available
8.6.- AERODINAMIKA
TA1000/1000C
Computer Controlled Aerodynamic Tunnel, 1000X1000 mm
Aerodynamics is the part of fluid mechanics that studies the motion of gases and the forces or reactions to which the bodies they interact with are subjected. Aerodynamics is not only important by itself but also as a complement to aeronautics....
COMPUTER CONTROLLED AERODYNAMIC TUNNEL, 1200X1200 MM - TA1200/1200
  • TA1200/1200C
Available
8.6.- AERODINAMIKA
TA1200/1200C
Computer Controlled Aerodynamic Tunnel, 1200X1200 mm
Aerodynamics is the part of fluid mechanics that studies the motion of gases and the forces or reactions to which the bodies they interact with are subjected. Aerodynamics is not only important by itself but also as a complement to aeronautics....
WIND TUNNEL FLIGHT DEMONSTRATION UNIT - TADV225/450
  • TADV225/450
Available
8.6.- AERODINAMIKA
TADV225/450
Wind Tunnel Flight Demonstration Unit
The Aerodynamic Tunnel for Flight Demonstration, "TADV225/450", consists of an open wind tunnel in whose working section the model of an aircraft with fixed wings is located. The aircraft is piloted by the user using controls similar to those of a...
COMPUTER CONTROLLED CLOSED AERODYNAMIC TUNNEL, 2000X2000 MM - TACL2000/2000C
  • TACL2000/2000C
Available
8.6.- AERODINAMIKA
TACL2000/2000C
Computer Controlled Closed Aerodynamic Tunnel, 2000X2000 mm
Aerodynamics is the part of fluid mechanics that studies the motion of gases and the forces or reactions to which the bodies they interact with are subjected. Aerodynamics is not only important by itself but also as a complement to aeronautics....
FLOW VISUALIZATION AERODYNAMIC TUNNEL - TAVF180/100
  • TAVF180/100
Available
8.4.- VISUALISASI ALIRAN
TAVF180/100
Flow Visualization Aerodynamic Tunnel
The Flow Visualization Aerodynamic Tunnel, "TAVF180/100", consists of a vertical conduction in which an upward flow of air and smoke is induced, which passes through different models allowing to study the behavior of the flow around it. Thus it is...
AERODYNAMIC TESTING BENCH - ATBB
  • ATBB
Available
8.6.- AERODINAMIKA
ATBB
Aerodynamic Testing Bench
The Aerodynamic Testing Bench, "ATBB", has two main components: a radial fan with speed control and a working section where the different accessories for the tests are fixed. The radial blower impels the air through an air intake pipe to a...
COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC
  • PBSPC
Available
8.7.1.- POMPA
PBSPC
Computer Controlled Series/Parallel Pumps Bench
The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...
SERIES/PARALLEL PUMPS BENCH - PBSPB
  • PBSPB
Available
8.7.1.- POMPA
PBSPB
Series/Parallel Pumps Bench
The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...
COMPUTER CONTROLLED CENTRIFUGAL PUMP BENCH - PBCC
  • PBCC
Available
8.7.1.- POMPA
PBCC
Computer Controlled Centrifugal Pump Bench
The Computer Controlled Centrifugal Pump Bench, "PBCC", is a bench-top unit consists of a centrifugal pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...
CENTRIFUGAL PUMP BENCH - PBCB
  • PBCB
Available
8.7.1.- POMPA
PBCB
Centrifugal Pump Bench
The Centrifugal Pump Bench, "PBCB", is a bench-top unit consists of a centrifugal pump, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two manometer and a flow sensor.A...
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PBEC
Available
8.7.1.- POMPA
PBEC
Computer Controlled Gear Pump Bench
The Computer Controlled Gear Pump Bench, "PBEC", is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- POMPA
PBAC
Computer Controlled Axial Pump Bench
The Computer Controlled Axial Pump Bench, "PBAC", is designed to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve. Besides, it...
COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC
  • PBRC
Available
8.7.1.- POMPA
PBRC
Computer Controlled Piston Pump Bench
The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...
COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC
  • HMFAC
Available
8.7.3.- TURBIN
HMFAC
Computer Controlled Axial Flow Turbomachines Unit
The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...
COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC
  • HVCC
Available
8.7.2.- PENGGEMAR
HVCC
Computer Controlled Centrifugal Fan Teaching Unit
The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...
CENTRIFUGAL FAN TEACHING UNIT - HVCB
  • HVCB
Available
8.7.2.- PENGGEMAR
HVCB
Centrifugal Fan Teaching Unit
The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...
COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC
  • HVAC
Available
8.7.2.- PENGGEMAR
HVAC
Computer Controlled Axial Fan Teaching Unit
The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...
AXIAL FAN TEACHING UNIT - HVAB
  • HVAB
Available
8.7.2.- PENGGEMAR
HVAB
Axial Fan Teaching Unit
The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...
COMPUTER CONTROLLED PELTON TURBINE - TPC
  • TPC
Available
5.3.6.- ENERGI HIDROLIK
TPC
Computer Controlled Pelton Turbine
The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • TFC
Available
5.3.6.- ENERGI HIDROLIK
TFC
Computer Controlled Francis Turbine
The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...
COMPUTER CONTROLLED KAPLAN TURBINE - TKC
  • TKC
Available
5.3.6.- ENERGI HIDROLIK
TKC
Computer Controlled Kaplan Turbine
The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • TFRC
Available
5.3.6.- ENERGI HIDROLIK
TFRC
Computer Controlled Radial Flow Turbine
The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- ENERGI HIDROLIK
TFAC
Computer Controlled Axial Flow Turbine
The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC
  • HTRC
Available
5.3.6.- ENERGI HIDROLIK
HTRC
Computer Controlled Experimental Reaction Turbine
The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
Meminta informasi