8.- MEKANIKA FLUIDA

Cabang Mekanika Fluida mempelajari hukum perilaku fluida pada diam (fluida statika ) atau dalam gerak (fluida dynamics ) dan proses interaksinya dengan benda padat. Fluida dianggap sebagai zat yang dapat mengalir , dengan kata lain bergerak. Diantaranya terdapat zat cair (air, minyak, alkohol, susu, asam sulfat, bensin) dan gas (udara, oksigen, nitrogen, helium, argon, metana, butana, gas alam).

Lihat Lebih Banyak

Cairan dapat ditemukan di mana saja dalam kehidupan sehari-hari, dari udara yang mengelilingi kita, air di kolam renang dan untuk irigasi, sistem hidrolik yang memungkinkan kita untuk mengerem mobil kita, pemanas atau AC, ke sistem darah kita sendiri. Studi fluida didasarkan pada prinsip terkenal Archimedes dan Pascal, persamaan Bernoulli, Venturi efek atau hukum Darcy , antara lain. Bidang Teknik Mekanika Fluida yang mencari penerapan dipelajari secara empiris dan secara matematis, menyoroti bilangan tak berdimensi seperti Reynolds, Prandtl, Mach dan Froude . Pentingnya prinsip mekanika fluida meninggalkan penemuan-penemuan yang umum, seperti air transfer melalui saluran, maritim dan transportasi udara, mesin hidrolik, termal dan pneumatik, solusi untuk masalah kavitasi atau water hammer dalam pipa, hidrolik dan transmisi pneumatik dan kontrol, dll.

Mengingat relevansi fluida dalam berbagai aplikasi, penting untuk mengetahui sifatnya, yaitu jenis fluida dan mendeskripsikannya berdasarkan properti. Yang paling signifikan adalah: tekanan, suhu, volume, kepadatan, viskositas, kompresibilitas, panas spesifik, ekspansi termal, dan daya larut.

Lihat Produk
Materi Terkait
MEKANIKA FLUIDA SUBCATEGORIES

8.1.- LABORATORIUM MODULER MEKANIK FLUIDA

Hidrolika merupakan salah satu cabang ilmu yang membahas tentang sifat mekanik fluida dan Mekanika Fluida merupakan dasar dari Hidrolika. EDIBON mencoba untuk menanggapi, dengan cara yang sederhana dan praktis, permintaan akademis untuk mengajar dan belajar dasar Mekanika Fluida. Untuk melakukan...
lihat

8.2.- PENGUKURAN

Metrologi adalah ilmu yang mempelajari pengukuran magnitudo. Ini didasarkan pada proses yang berusaha untuk membangun hubungan antara nilai referensi dan objek atau fenomena yang besarannya harus dikuantifikasi dan mendapatkan ekspresi dari pengukuran. Pengukuran harus dapat direproduksi dan...
lihat

8.3.- HIDROSTATIK

Hidrostatika adalah cabang dari mekanika fluida yang mempelajari fenomena dan perilaku terkait yang terjadi ketika fluida berada di dalam wadah dan di sana ada kekuatan yang mengubah keadaan cairan saat diam atau bergerak. Sebaliknya, hidrodinamika mempelajari cairan yang bergerak.Hidrostatika...
lihat

8.4.- VISUALISASI ALIRAN

Aliran fluida dibingkai dalam cabang dinamika fluida. Studi fokus pada kompresi pergerakan fluida, dikondisikan oleh hukum Newton dan kekekalan massa dan energi dan hukum seperti Stokes ', bilangan Reynolds atau Prandt, antara lain.Visualisasi pergerakan dan arah fluida berkat jalur arus dan...
lihat

8.5.- SALURAN HIDROLIK

Air adalah elemen fundamental yang digunakan oleh makhluk hidup dan, sejak zaman kuno, berbagai perangkat telah dikembangkan untuk distribusi dan konsumsi, seperti saluran.Saluran hidraulik atau terbuka atau, sederhananya, saluran didefinisikan sebagai sistem perpipaan yang terbuka ke atmosfer...
lihat

8.6.- AERODINAMIKA

Aerodinamika adalah bagian dari mekanika fluida yang mempelajari gas dalam gerakan dan gaya atau reaksi yang menyebabkan benda yang berinteraksi dengan gas-gas tersebut terkena. Selain pentingnya aerodinamika itu sendiri, nilai kontribusinya terhadap aeronautika harus ditambah. Sesuai dengan...
lihat

8.7.- MESIN FLUIDA

Sebuah aplikasi khusus, area komunikasi dalam mekanika fluida adalah yang bertanggung jawab untuk mempelajari fluida mesin. Mesin fluida adalah perangkat yang mengubah energi fluida yang melewatinya atau mentransfer energi ke fluida. Fluida tersebut dapat berupa gas, uap atau cair.Berdasarkan...
lihat

8.8.- SISTEM PIPA FLUIDA

Dalam teknik, sistem perpipaan fluida didefinisikan sebagai struktur atau konstruksi yang mengangkut fluida dari sumber ke < strong>tujuan. Dua jenis saluran dibedakan: saluran tertutup (pipa, terowongan atau gorong-gorong) dan saluran terbuka (arus alami). Aliran dalam saluran tertutup...
lihat

8.9.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...
lihat
MEKANIKA FLUIDA UNITS
Menampilkan 1 -36 dari 168 produk
BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA
  • LIFLUBA
Available
8.1.7.- MESIN HIDROLIK: TURBIN
LIFLUBA
Laboratorium Mekanika Fluida Dasar Terintegrasi:
Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...
HYDRAULICS BENCH - FME00
Available
8.1.1.- UNIT DASAR
FME00
Unit Hidrolik
Aksesori dari LIFLUBA
The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...
BASIC HYDRAULIC FEED SYSTEM - FME00/B
Available
8.1.1.- UNIT DASAR
FME00/B
Sistem Pengumpan Hidrolik Dasar
Aksesori dari LIFLUBA
The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.
FLOW OVER WEIRS - FME02
Available
8.1.2.- PENGUKURAN
FME02
Aliran Berlebih Weirs
Aksesori dari LIFLUBA
The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...
DEAD WEIGHT CALIBRATOR - FME10
Available
8.1.2.- PENGUKURAN
FME10
Kalibrator Berat Mati
Aksesori dari LIFLUBA
The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis...
FLOWMETER CALIBRATOR - FME37
Available
8.1.2.- PENGUKURAN
FME37
Kalibrator Alat Ukur Aliran
Aksesori dari LIFLUBA
The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...
FLOW METER DEMONSTRATION - FME18
Available
8.1.2.- PENGUKURAN
FME18
Demonstrasi Flowmeter
Aksesori dari LIFLUBA
The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...
DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26
Available
8.1.2.- PENGUKURAN
FME26
Sistem Pengukur Depresi (vacuum gauge)
Aksesori dari LIFLUBA
The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...
TRANSPARENT VORTEX FLOW METER - FME30
Available
8.1.2.- PENGUKURAN
FME30
Vortex Flowmeter
Aksesori dari LIFLUBA
The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...
VORTEX FLOW METER - FME30/I
Available
8.1.2.- PENGUKURAN
FME30/I
Vortex Flow Meter
Aksesori dari LIFLUBA
The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...
STATIC PITOT TUBE - FME32
Available
8.1.2.- PENGUKURAN
FME32
Tabung Statis Pitot
Aksesori dari LIFLUBA
The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...
FLUID STATICS AND MANOMETRY - FME34
Available
8.1.2.- PENGUKURAN
FME34
Fluida Statik dan Manometri
Aksesori dari LIFLUBA
The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...
ROTAMETER - FME36
Available
8.1.2.- PENGUKURAN
FME36
Rotameter
Aksesori dari LIFLUBA
The Rotameter, "FME36", designed by EDIBON, is a variable area flowmeter with floater. This type of flowmeter can be used for flow measurements in almost any environment.The operation mode of this type of flowmeter is based on the fact that if a...
HYDRAULIC RAM PUMP - FME38
Available
8.1.6.- MESIN HIDROLIK: POMPA
FME38
Pompa Ariete Hidrolik
Aksesori dari LIFLUBA
The Hydraulic Ram Pump, "FME38", designed by EDIBON, utilizes the water hammer effect to raise water to a higher level than its power source. It operates by harnessing the rapid change in water velocity in a pipe that occurs when its flow is...
DATA ACQUISITION SYSTEM AND SENSORS - BDAS
Available
8.1.7.- MESIN HIDROLIK: TURBIN
BDAS
Data Acquisition System and Sensors
Aksesori dari LIFLUBA
BDAS is designed to monitor the measurements of each unit type "FME" from a computer (PC).This system can monitor any unit, checking the revolutions given by the water pump or the torque, differential pressures for Bernoulli theorems, pressure...
HYDROSTATIC PRESSURE - FME08
Available
8.1.3.- HIDROSTATIS
FME08
Tekanan Hidrostatik
Aksesori dari LIFLUBA
The Surface Pressure Unit, "FME08", designed by EDIBON, allows to study the center of pressures with a partially or totally submerged quadrant.This unit consists of a quadrant mounted on the arm of a balance that pivots around an axis.When the...
METACENTRIC HEIGHT DEMOSTRATION - FME11
Available
8.1.3.- HIDROSTATIS
FME11
Tinggi Metasentrik
Aksesori dari LIFLUBA
The Metacentric Height Demonstration Unit, "FME11", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height.The unit consists of a floating methacrylate prismatic base, on which a vertical...
PASCAL'S PRINCIPLE DEMONSTRATION - FME33
Available
8.1.3.- HIDROSTATIS
FME33
Demonstrasi Prinsip Pascal
Aksesori dari LIFLUBA
The Pascal's Principle Demonstration Unit, "FME33", designed by EDIBON, allows to demonstrate Pascal's principle, i.e. that the pressure in an incompressible fluid is independent of the column size section but depends only on its height (liquid...
FLUID PROPERTIES - FME35
Available
8.1.3.- HIDROSTATIS
FME35
Sifat-sifat Fluida
Aksesori dari LIFLUBA
The Fluid Properties Unit, "FME35", designed by EDIBON, allows the study of the fluids fundamental properties that affect their behavior in practical applications.We can study capillarity, density and relative density (specific gravity), buoyancy...
JET IMPACT ON SURFACES - FME01
Available
8.1.4.- HIDRODINAMIS
FME01
Dampak Jet pada Permukaan
Aksesori dari LIFLUBA
The unit consists of a cylindrical tank with lateral transparent surfaces where a nozzle, connected to the Hydraulics Bench (FME00), is aligned with a device in which the problem surface is fitted. The vertical force made by the water against the...
BERNOULLI'S THEOREM DEMONSTRATION - FME03
Available
8.1.4.- HIDRODINAMIS
FME03
Demonstrasi Teorema Bernoulli's
Aksesori dari LIFLUBA
The Bernoulli's Theorem Demonstration unit, "FME03", designed by EDIBON is mainly composed of a circular section pipe with the shape of a truncated cone, transparent and with seven pressure taps that allows to measure, simultaneously, the static...
ORIFICE DISCHARGE - FME04
Available
8.1.4.- HIDRODINAMIS
FME04
Lubang Pengosongan
Aksesori dari LIFLUBA
The Orifice Discharge Unit, "FME04", designed by EDIBON allows the study of the different concentration, discharge and velocity coefficients for thin and/or thick wall for different types: colloidal, Venturi or diaphragm.The unit consists of a...
FREE AND FORCED VORTEX - FME14
Available
8.1.4.- HIDRODINAMIS
FME14
Vortex Bebas dan Paksa
Aksesori dari LIFLUBA
The Forced and Free Vortex unit, "FME14", designed by EDIBON, allows the study of the fluid rotation in relation to an axis and the study of circular flow at changing velocities.The unit has a cylindrical and transparent deposit with two inlet...
ORIFICE AND FREE JET FLOW - FME17
Available
8.1.4.- HIDRODINAMIS
FME17
Aliran Lubang dan Free Jet
Aksesori dari LIFLUBA
The Orifice and Free Jet Flow unit, "FME17", designed by EDIBON, allows the study of the different discharge and velocity coefficients in permanent or variable regime as well as the calculation of the discharge times.The unit consists of a...
CAVITATION PHENOMENON DEMONSTRATION - FME19
Available
8.1.4.- HIDRODINAMIS
FME19
Demonstras Penomena Kavitasi
Aksesori dari LIFLUBA
The Cavitation Phenomenon Demonstration unit, "FME19", designed by EDIBON is composed of a Venturi tube with a rectangular cross section, one of its sides being transparent, allowing a better visualization of the cavitation phenomenon.It includes...
VENTURI, BERNOULLI AND CAVITATION UNIT - FME22
Available
8.1.4.- HIDRODINAMIS
FME22
Unit Venturi, Bernoulli and Cavitation
Aksesori dari LIFLUBA
The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...
OSBORNE REYNOLDS' DEMONSTRATION - FME06
Available
8.1.5.- VISUALISASI ALIRAN
FME06
Demonstrasi Osborne Reynolds
Aksesori dari LIFLUBA
The Osborne Reynolds Demonstration Unit, "FME06", designed by EDIBON, consists of a cylindrical tank endowed with a nozzle, that is fitted to a methacrylate pipe, which allows the fluid visualization.A spillway guarantees the homogeneity of the...
FLOW VISUALIZATION IN CHANNELS - FME09
Available
8.1.5.- VISUALISASI ALIRAN
FME09
Visualisasi Aliran pada Kanal
Aksesori dari LIFLUBA
The Flow Visualization in Channels unit, "FME09", designed by EDIBON, allows the visualization of liquid spillage phenomena in weirs and the study of objects submerged in a fluid stream (aerodynamics).The unit consists of a transparent...
LAMINAR FLOW DEMONSTRATION - FME20
Available
8.1.5.- VISUALISASI ALIRAN
FME20
Demonstrasi Aliran Kental
Aksesori dari LIFLUBA
The Laminar Flow Demostration unit, "FME20", designed by EDIBON, allows a complete study of the bi-dimensional problems associated with laminar flow. Thanks to an efficient system of dye injection we can observe the different models of flow. It...
FLOW CHANNEL, LENGHT: 1 M - FME25
Available
8.1.5.- VISUALISASI ALIRAN
FME25
Saluran Cairan, panjang: 1 m
Aksesori dari LIFLUBA
The Flow Channel, lenght: 1 m, "FME25", designed by EDIBON, allows to study of the water behavior flowing through a channel.It basically consists of a channel of rectangular cross section with transparent walls, through which water flows.It has a...
HORIZONTAL OSBORNE REYNOLDS DEMONSTRATION - FME31
Available
8.1.5.- VISUALISASI ALIRAN
FME31
Demonstrasi Horisontal Osborne Reynolds
Aksesori dari LIFLUBA
The Osborne Reynolds Horizontal Demonstration Unit, "FME31", designed by EDIBON, allows to study the characteristics of a liquid flowing through a pipe and the Reynolds number in each of the liquid states.The FME31 unit makes it possible to study...
SERIES/PARALLEL PUMPS - FME12
Available
8.1.6.- MESIN HIDROLIK: POMPA
FME12
Pompa Seri/Paralel
Aksesori dari LIFLUBA
The Series/Parallel Pumps unit, "FME12", designed by EDIBON, allows the study of the coupling between two series/parallel centrifugal pumps, obtaining the characteristic curves as well as the calculation of the water flow rate.The unit consists of...
Meminta informasi