NEW Basic Mechanics course
Ler mais7.1.- ENGENHARIA MECÂNICA
Engenharia mecânica é a aplicação de física aos elementos que nos rodeiam para melhorar os dispositivos mecânicos existentes ou criar novos dispositivos. Uma vez que se baseia em princípios físicos, a sua origem remonta à origem desses princípios e o seu desenvolvimento está estreitamente ligado aos avanços em mecânica. No entanto, não foi até à invenção do motor vapor que se tornou um dos pilares do desenvolvimento da indústria.
Ver maisA Revolução Industrial do século XVII teve lugar como resultado da criação deste dispositivo. A partir desse momento, com as contribuições de cientistas e engenheiros tão importantes como Watt, Stephenson, Tesla ou Rankine, iniciou-se uma renovação sem precedentes tanto do conceito como do desenvolvimento de novas máquinas.
O conceito de indústria, como era conhecido até esse momento, mudou com o desenvolvimento dessas máquinas. Produção de massa foi implementada, máquina desenhos foram melhorados e, consequentemente, a gama de processos de produção foi aumentada, resultando numa variedade impensável de novos produtos adaptados às necessidades da sociedade.
Na engenharia mecânica, vale a pena mencionar os seguintes campos de estudo e aplicação:
- Mecanismos.
- Estruturas.
- Dinâmica.
- Vibrações.
- Oscilações.
No presente, qualquer indústria, desde alimentos até aeroespacial, debe estar ao mais alto nível de tecnologia inovação. Portanto, pesquisa e desenvolvimento de novos dispositivos é particularmente importante ter sempre o mais recente tecnologia e estar ao nível exigido pela indústria 4.0.
Ver produtos
Materiais Relacionados
ENGENHARIA MECÂNICA UNITS
7.1.3.- ESTÁTICA E DINÂMICA
MEMB2
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
7.1.3.- ESTÁTICA E DINÂMICA
MBMRC
Equipamento de Balanceamento de Massas Recíprocas, Controlado por Computador (PC)
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
7.1.3.- ESTÁTICA E DINÂMICA
MEAL
Equipamento de Estudo e Análise de Cames
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
7.1.3.- ESTÁTICA E DINÂMICA
MDFC
Equipamento para Demonstração da Força de Coriolis
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
7.1.3.- ESTÁTICA E DINÂMICA
MFCE
Equipamento para Estudo de Força Centrífuga
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
7.1.3.- ESTÁTICA E DINÂMICA
MGI
Giroscópio
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
7.1.3.- ESTÁTICA E DINÂMICA
CGU
Equipamento de Reguladores Centrífugos
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- ESTÁTICA E DINÂMICA
MED
Equipamento de Equilíbrio Dinâmico/Estático
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- ESTÁTICA E DINÂMICA
MES
Equipamento de Equilíbrio Simples
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- ESTÁTICA E DINÂMICA
MIF
Equipamento de Volante de Inércia
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- ESTÁTICA E DINÂMICA
MRYE1
Equipamento de Roda e Eixo
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- ESTÁTICA E DINÂMICA
MRYE2
Equipamento de Roda e Eixo Diferencial
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
7.1.3.- ESTÁTICA E DINÂMICA
MELH
Equipamento para Estudo da Lei de Hooke
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
7.1.3.- ESTÁTICA E DINÂMICA
MSHU
Equipamento de Movimento Harmônico Simples
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
7.1.3.- ESTÁTICA E DINÂMICA
SRI
Equipamento para Estudo do Momento de Inércia Rotacional
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MEVTC
Equipamento de Estudo de Vibrações Torcionais, Controlado por Computador (PC)
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVRE
Equipamento de Vibração em Mola Espiral
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVL
Equipamento de Vibrações Livres
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVLF
Equipamento de Vibrações Livres e Forçadas
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MEVLB
Equipamento de Estudo de Vibração Livre em Barras
The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MOT
Equipamento de Oscilação Torcional
The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVCC
Equipamento para Estudo da Velocidade Crítica, Controlado por Computador (PC)
Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC". The operation of the "MVCC"...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MEER
Equipamento de Estudo de Rotação de Eixos
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MCF
Equipamento de Correia de Fricção
The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEF
Equipamento de Estudo de Fricção
The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MPCO
Equipamento de Estudo da Distribuição de Pressão em Rolamentos
The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT
Equipamento Modular de Tribologia
The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-UB
Equipamento de Acionamento para Ensaios Tribológicos
Acessório de
MEMT
This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-1
Distribuição de Pressão Radial em Rolamento Deslizante
Acessório de
MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-2
Fricção Dinâmica de um Cilindro em um Rolo
Acessório de
MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...