Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course of Fluid Mechanics and learn about #fluids properties. #DiscoverEdibon #Engineering.
PDCFP Equipamento para o Estudo de Perdas de Carga de Fluídos Compressíveis em Tubulações
SISTEMAS INOVADORES
The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the distribution of fluid in pipes that have differents sections and fittings.
NOTÍCIAS RELACIONADAS
Descrição Geral
The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the distribution of fluid in pipes that have differents sections and fittings.
The unit consists of a system of pipes connected through a series of accessories that allow the distribution of air along a network. The pipes have different diameters. Besides, the pipe network has multiple pressure measurement taps to check the effects of the different accessories on the flow of air through the pipeline. The pressure taps along the pipe are used to determine the friction factor of the pipe and the pressure drops. The accessories includes are an elbow, an orifice plate, a narrowing and a widening of the pipe.
EXERCÍCIOS E PRÁTICAS GUIADAS
EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL
- Use of manometers to measure pressure drops.
- Air flow measurement with orifice plate.
- Determination of pressure drops in straight pipes and the friction factor of the pipe.
- Determination of pressure drops in elbows and angles and the resistance coefficient of each elbow and angle.
- Understanding the use of Reynolds’ numbers.
- Determination of the laminar or turbulent flow conditions.
- Calculation of the flow rate from the pressure drop in pipes.
EQUIPAMENTOS COMPLEMENTARES
8.8.- CONDUÇÃO DE FLUIDOS
AFTC
The Computer Controlled Fluid Friction in Pipes, with Hydraulics Bench (FME00), "AFTC", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses and pressure development in...
8.8.- CONDUÇÃO DE FLUIDOS
AFT
Unidade de Atrito em Tubulações, com Banco Hidráulico (FME00)
The Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings...
8.8.- CONDUÇÃO DE FLUIDOS
AFT/B
Equipamento de Atrito em Tubulações, com Grupo Hidráulico (FME00/B)
The Fluid Friction in Pipes Unit, with Basic Hydraulics Feed System (FME00/B), "AFT/B", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and...
8.8.- CONDUÇÃO DE FLUIDOS
AFT/P
Equipamento de Atrito em Tubulações
The Fluid Friction in Pipes Unit, "AFT/P", is designed to determine the friction coefficient in pipes, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.This unit...
8.8.- CONDUÇÃO DE FLUIDOS
AMTC
Equipamento de Unidade de Rede de Tubulação, com Bancada Hidráulica (FME00), Controlado por Computador (PC)
The Computer Controlled Pipe Network Unit, with Hydraulics Bench (FME00), "AMTC", consists of a pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required...
8.8.- CONDUÇÃO DE FLUIDOS
AMT
Unidade de Malha em Tubulações, com Banco Hidráulico (FME00)
The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...
8.8.- CONDUÇÃO DE FLUIDOS
AMT/B
Equipamento de Rede em Tubulações, com Grupo Hidráulico (FME00/B)
The Pipe Network Unit, without Hydraulics Bench (FME00), "AMT/B", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to...
8.8.- CONDUÇÃO DE FLUIDOS
AMT/P
Equipamento de Rede em Tubulações
The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...
8.8.- CONDUÇÃO DE FLUIDOS
EGAC
Equipamento de Golpe de Aríete, Controlado por Computador (PC)
The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....
8.7.5.- COMPRESSORES
HFCC
Equipamento de Fluxo de Fluidos Compressíveis, Controlado por Computador (PC)
The Computer Controlled Flow of Compressible Fluids Unit, "HFCC", allows to study the variation of pressure and density, the speeds of the fluid, the different fluctuations that the fluid presents when fluids across different sections in a pipe,...
8.9.3.- INSTALAÇÕES E MANUTENÇÃO
PDDRC
Equipamento de Processos de Drenagem Transitória em Reservatórios de Armazenamento, Controlado por Computador (PC)
The Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs, "PDDRC", allows to investigate transient drainage processes in storage reservoirs, to simulate a rainwater retention basin and to study the operation of a surge...
9.2.- VENTILAÇÃO, AQUECIMENTO, AR-CONDICIONADO E ÁGUA QUENTE SANITÁRIA
TSCAC
Equipamento de Sistemas de Dutos de Ar, Controlado por Computador (PC)
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...