2.- ELETRÔNICA

Electrónica é o ramo da física centrado no comportamento dos electrões. Em engenharia, electronics é a parte que estuda e desenvolve circuitos electrónicos para que os electrões que circulam através deles tenham o comportamento exigido pelas especificações da aplicação.

Ver mais

Electrónica tem sido uma das disciplinas mais desenvolvidas ao longo do século XX, passando de ter uma aplicação muito limitada como a ter um grande impacto na sociedade. Alguns exemplos de aplicações electrónicas chave para compreender esta grande influência são a sensores e metros de todos os tipos de quantidades físicas, tais como nível de pressão, nível de fluxo e medição de temperatura, a utilização de amplificadores electrónicos e filtros, o desenvolvimento de circuitos integrados, microprocessadores e pessoal computadores, o desenvolvimento de transistores de diferentes tecnologias tais como MOSFET, JFET, BJT, IGBT, etc.

Aplicações electrónicas são quase infinitas, e novas contribuições são melhoradas e acrescentadas todos os anos. Dependendo da aplicação do circuitos electrónicos, os seguintes grupos são diferenciados: electrónica analógica e electrónica digital dependendo se binário ou análogosinais são utilizados, electrónica de potência dependendo de serem ou não utilizadas eléctrica de correntes e tensões eléctricas, instrumentação electrónica dependendo de serem ou não utilizadas medidas eléctricas de quantidades físicas, etc.

A futuro da electrónica centra-se na miniaturização de componentes electrónicos, aumentando a sua eficiência e velocidade. Neste trabalho, a descoberta de revolucionários novos materiais, tais como graphene ou silicene, é de importância fundamental.

Ver produtos
Materiais Relacionados
ELETRÔNICA SUBCATEGORIES

2.1.- FONTES DE ALIMENTAÇÃO, EQUIPAMENTOS DE MEDIÇÃO E ACESSÓRIOS

A equipamento electrónico de laboratório é o conjunto de instrumentos necessários para realizar a experimentação numa sessão prática de electrónica. As características do equipamento dependerão do nível teórico do laboratório a equipar, quer se trate de um escola técnica, de um escola...
Ver

2.2.- KITS DE MONTAGEM DE CIRCUITOS

A fase de desenvolvimento electrónico de um dispositivo é um grupo de fases levadas a cabo para obter um produto que cumpre as especificações exigidas.As fases mais características de qualquer desenvolvimento de dispositivo electrónico são: definição das especificações do equipamento, concepção...
Ver

2.3.- FUNDAMENTOS TEÓRICO-PRÁTICOS

A fase de desenvolvimento electrónico de um dispositivo é um grupo de fases levadas a cabo para obter um produto que cumpre as especificações exigidas.As fases mais características de qualquer desenvolvimento de dispositivo electrónico são: definição das especificações do equipamento, concepção...
Ver

2.4.- ELETRÔNICA INDUSTRIAL

A eletrónica industrial é um ramo da engenharia eletrónica que se centra em sistemas electrónicos industriais, ou seja, equipamentos electrónicos utilizados na indústria. Um dos ramos mais importantes da eletrónica industrial é a eletrónica de potência, que se ocupa do desenvolvimento de...
Ver

2.5.- ELETRÔNICA AUTOMOTIVA

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
Ver
ELETRÔNICA UNITS
Mostrando 73-108 de um total de 122 produto(s)
PRESSURE TEST MODULE - BS3
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS3
Módulo de Ensaios de Pressão
Acessório de BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
FLOW TEST MODULE - BS4
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS4
Módulo de Ensaios de Vazão
Acessório de BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
OVENS TEST MODULE - BS5
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS5
Módulo de Ensaios de Fornos
Acessório de BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
LIQUID LEVEL TEST MODULE - BS6
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS6
Módulo de Ensaios de Nível de Líquidos
Acessório de BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
TACHOMETER TEST MODULE - BS7
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS7
Módulo de Ensaios de Tacômetro
Acessório de BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
PROXIMITY TEST MODULE - BS8
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS8
Módulo de Ensaios de Proximidade
Acessório de BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
PNEUMATIC TEST MODULE - BS9
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS9
Módulo de Ensaios de Pneumática
Acessório de BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
LIGHT TEST MODULE - BS10
  • Acessório de BS
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
BS10
Módulo de Ensaios de Iluminação
Acessório de BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSORES E INSTRUMENTAÇÃO ELETRÔNICA
SAIT
Equipamento de Transdutores e Instrumentação
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-BB
Módulo de Viga e Esfera
Acessório de RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-SM
Módulo de Servomotor CC
Acessório de RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-PI
Módulo de Controle de Pêndulo Invertido
Acessório de RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-CLM
Módulo de Controle de Levitação Magnética
Acessório de RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-TE
Módulo de Controle de Temperatura
Acessório de RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-P
Módulo de Controle de Pressão
Acessório de RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-N
Módulo de Controle de Nível
Acessório de RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-C
Módulo de Controle de Vazão
Acessório de RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-I
Módulo de Controle de Luminosidade
Acessório de RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-pH
Módulo de Controle de pH
Acessório de RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- FUNDAMENTOS TEÓRICO-PRÁTICOS
RYC-CP
Módulo de Controle de Posição
Acessório de RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI
  • AE-SMI
Available
2.4.2.- SERVOMOTORES ELÉTRICOS
AE-SMI
Aplicação Industrial de Servomotores
The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...
BRUSHLESS MOTOR INDUSTRIAL APPLICATION - AE-BMI
  • AE-BMI
Available
2.4.2.- SERVOMOTORES ELÉTRICOS
AE-BMI
Aplicação Industrial de Motores Brushless
The Brushless Motor Industrial Application, "AE-BMI", is designed to perform the most common control used in the industry: the position control. The "AE-BMI" application allows the student to configure up to four positions with all the parameters...
SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB
  • SERIN/CCB
Available
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CCB
Equipamento Básico de Servossistemas para Motores CC
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
AEL-SERIN/CA-1KW
Aplicação de Servomotor Industrial de CA de 1 kW
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
POWER ELECTRONICS APPLICATION, WITH SCADA - AEL-PWEC
  • AEL-PWEC
Available
5.1.3.2.- TRASMISSÃO DE ENERGIA
AEL-PWEC
Aplicação de Eletrônica de Potência, com SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
Solicitar informação