Setting up at Centre de Formation des Metiers de l´Industrie (CFMI) in Togo

The Computer Controlled Water Treatment Plant 1, "PPTAC/1", designed by EDIBON, allows to study the main principle of the critical operations in the water treatment.These operations are: depth filtration, adsorption and ion exchange.The general...

The Computer Controlled Deep Bed Filter Unit, "EFLPC", allows us to filter a fluid in order to eliminate particles in suspension, to have it in more adequate conditions for its subsequent use or consumption.The pump takes raw water from one of the...

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...

This unit has been designed for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The unit basically consist of a tank (soils container) to contain the sand, lower water...

This filtration unit has been designed to study the filtration process with two different types of filters. On one hand, there is a vertical plate filter consisting of nylon plates with a diameter of 5 microns, used to filter a known concentration...

The Photovoltaic Power Plants Application, with SCADA, ''AEL-PHVGC'', has been designed to study the operations carried out in photovoltaic power systems connected to the energy national grid. This application allows to study the procedure of...

The Computer Controlled Automobile Air Conditioning Trainer, "TAAUC", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car.The number of revolutions of the engine and, therefore, the compressor,...

The Computer Controlled Refrigeration Unit with Open Compressor is arranged in a clear way and represents a typical compression refrigeration system with open compressor:The main elements of the unit are:Open compressor activated by an electric...

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...