9.- TERMODINAMIK DAN TERMOTEKNIK

Termodinamika adalah cabang fisika yang bertanggung jawab untuk mempelajari interaksi antara panas , kerja , dan manifestasi lain dari energi dalam sistem dalam kesetimbangan . Prinsip termodinamika menjelaskan perilaku global sistem makroskopis dalam keadaan kesetimbangan.

Lihat Lebih Banyak

Termodinamika tidak berhubungan dengan proses perpindahan panas, ia hanya mempelajari keadaan awal dan akhir. Proses ini termasuk dalam lingkup termoteknik, yang berfokus pada proses konduksi, konveksi dan radiasi yang menentukan fluks panas dan energi nyata.

Hukum dasar yang menjelaskan fenomena termodinamika telah dipelajari sepanjang sejarah dari studi tentang hubungan tekanan, volume dan suhu dalam sistem yang berbeda:

  • Sistem terbuka: panas dan massa dipertukarkan dengan bagian luar (menara pendingin).
  • Sistem tertutup: hanya panas yang dipertukarkan dengan bagian luar (wadah dengan plunger bergerak).
  • Sistem terisolasi: baik panas maupun massa tidak saling bertukar (termos ideal).

Termodinamika dan termoteknik memiliki banyak kegunaan, mulai dari pembangkit listrik di pembangkit listrik termal hingga sistem pendingin, mencakup juga teknik bangunan.

Aplikasi praktis utama dalam peralatan adalah mesin termal yang memanfaatkan transformasi dan pertukaran energi dan panas: mesin, turbin , A.C., pemanas , boiler, saluran pembuangan, menara pendingin

Lihat Produk
Materi Terkait
TERMODINAMIK DAN TERMOTEKNIK SUBCATEGORIES

9.1.- FUNDAMENTAL DAN KONSEP DASAR TERMODINAMIKA

Termodinamika adalah cabang fisika yang termasuk dalam ilmu fenomenologi yang mempelajari sistem nyata, tidak dimodelkan, dan mengikuti metode eksperimental. Akibatnya, sistem tersebut secara eksperimental ditentukan oleh perkiraan dan pengukuran variabel.Secara makro, sistem termodinamika...
lihat

9.2.- PEMANASAN, VENTILASI, AC DAN AIR PANAS

Kondisi lingkungan tertentu dibutuhkan dalam banyak situasi kehidupan, misalnya, dalam lingkungan industri, rumah atau rumah kaca. Menurut persyaratan, udara parameter dapat dimodifikasi dengan bantuan peralatan khusus.Dalam kondisi normal, udara memiliki kandungan massa sekitar 23% oksigen, 76%...
lihat

9.3.- POMPA PANAS

Pompa kalor adalah mesin termal yang menukar energi dalam bentuk panas dari satu ruang ke ruang lain, dari sumber dingin ke ruang yang lebih panas. Energi harus disuplai untuk pengoperasiannya karena, karena hukum kedua termodinamika, panas secara spontan dipindahkan dari sumber panas ke sumber...
lihat

9.4.- PENDINGINAN

Pendinginan adalah proses termodinamika yang terdiri dari menurunkan atau mempertahankan suhu suatu ruangan atau benda. Prosesnya terletak pada pengambilan panas dari sumber dingin dan mentransfernya ke sumber panas. Cairan pendingin digunakan untuk mengangkut energi.Sistem pendinginan yang...
lihat

9.5.- SISTEM PIPA HIDROLIK TERMAL

Sistem perpipaan hidrolik termal adalah semua sistem transportasi fluida yang merupakan bagian dari sistem termal. Di sektor bangunan, sistem ini digunakan sebagai bagian dari pemanas dan fasilitas sanitasi.Sistem perpipaan dirancang dan dihitung berdasarkan beberapa tujuan, yang terpenting...
lihat

9.6.- PERPINDAHAN PANAS

Hukum termodinamika berurusan dengan transfer energi dan interaksi antara panas dan kerja, tetapi hanya dalam sistem kesetimbangan. Akibatnya, hukum memungkinkan kita untuk menentukan keadaan awal dan akhir, tetapi tidak bisa digunakan untuk memprediksi dan mengukur proses antara. Perpindahan...
lihat

9.7.- PENUKAR PANAS

Penukar panas adalah perangkat mekanis yang dirancang untuk mentransfer panas antara dua fluida. Panas dapat ditransfer melalui kontak antar fluida atau melalui dinding padat yang memisahkannya. Mereka adalah elemen dasar dalam sistem pendingin dan AC.Penukar panas kontak langsung adalah yang...
lihat

9.8.- MESIN TERMAL

Mesin termal adalah sekumpulan elemen mekanis yang melakukan pekerjaan melalui proses siklik di mana energi melintasi dari fokus panas ke fokus dingin melalui fluida yang dapat dimampatkan. Pada mesin termal, perubahan massa jenis yang signifikan terjadi pada fluida kerja saat melewati mesin....
lihat

9.9.- MESIN PEMBAKARAN INTERNAL

Sebuah mesin pembakaran dalam adalah sebuah mesin mekanik-fluida yang mengubah energi kimia dari campuran bahan bakar-udara menjadi energi mekanik setelah melalui proses pembakaran dalam kerja cylinder. Dalam pembakaran, energi yang terkandung dalam bahan bakar dilepaskan melalui penyalaannya dan...
lihat

9.10.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...
lihat
TERMODINAMIK DAN TERMOTEKNIK UNITS
Menampilkan 151 -180 dari 208 produk
TURBULENT FLOW HEAT EXCHANGER FOR TICB - TIFTB
  • Aksesori dari TICB
Available
9.7.- PENUKAR PANAS
TIFTB
Turbulent Flow Heat Exchanger for TICB
Aksesori dari TICB
Let us study the heat transfer between hot water that circulates through an internal tube and cold water that flows through the annular zone between the internal and the external tube.
CROSS FLOW HEAT EXCHANGER FOR TICB - TICFB
  • Aksesori dari TICB
Available
9.7.- PENUKAR PANAS
TICFB
Cross Flow Heat Exchanger for TICB
Aksesori dari TICB
Designed to study heat transfer between two fluids in cross flow configuration. Hot water flow coming from the base unit enters and leaves a radiator perpendicular to an air current, which is generated by a fan.
COMPUTER CONTROLLED HEAT EXCHANGERS BASIC UNIT - TICC/SS
  • TICC/SS
Available
9.7.- PENUKAR PANAS
TICC/SS
Computer Controlled Heat Exchangers Basic Unit
The Computer Controlled Basic Heat Exchangers Unit (TICC/SS) has been designed by Edibon to study and compare different types of small-scale heat exchangers working with parallel or counterflow arrangements.The complete unit consists of two main...
COMPUTER CONTROLLED CROSS FLOW HEAT EXCHANGER - TIFCC
  • TIFCC
Available
9.7.- PENUKAR PANAS
TIFCC
Computer Controlled Cross Flow Heat Exchanger
The Computer Controlled Cross Flow Heat Exchanger (TIFCC) basically consists of a rectangular wind tunnel made of stainless steel, resistant to corrosion. It has a bell-shaped inlet and a central opening arranged longitudinally with two supporting...
CROSS FLOW HEAT EXCHANGER - TIFCB
  • TIFCB
Available
9.7.- PENUKAR PANAS
TIFCB
Cross Flow Heat Exchanger
The Cross Flow Heat Exchanger (TIFCB) basically consists of a rectangular wind tunnel made of stainless steel, resistant to corrosion. It has a bellshaped inlet and a central opening arranged longitudinally with two supporting elements made of...
COMPUTER CONTROLLED WATER-TO-AIR HEAT EXCHANGER UNIT - TIAAC
  • TIAAC
Available
9.7.- PENUKAR PANAS
TIAAC
Computer Controlled Water-to-Air Heat Exchanger Unit
The Computer Controlled Water-to-Air Heat Exchanger Unit, "TIAAC", includes a stainless steel duct with a heat exchanger in its center and a centrifugal fan at one end. The fan impels the air through the heat exchanger. The heat exchanger...
HEAT EXCHANGERS IN THE REFRIGERATION UNIT - THER
  • THER
Available
9.7.- PENUKAR PANAS
THER
Heat Exchangers in the Refrigeration Unit
The "THER" consists of a refrigeration circuit, with the most common heat exchangers in refrigeration circuits. All the elements are clearly mounted in the front panel of the unit. The evaporator is an air cooling finned tube heat exchanger and a...
COMPUTER CONTROLLED TWO -SHAFT GAS TURBINE - TGDEC
  • TGDEC
Available
5.4.- ENERGI KONVENSIONAL
TGDEC
Computer Controlled Two -Shaft Gas Turbine
The main element of the Computer Controlled Two-Shaft Gas Turbine "TGDEC" is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress it.Tubular...
COMPUTER CONTROLLED TWO-SHAFT GAS TURBINE/ JET ENGINE - TGDEPC
  • TGDEPC
Available
5.4.- ENERGI KONVENSIONAL
TGDEPC
Computer Controlled Two-Shaft Gas Turbine/ Jet Engine
The main element of the Computer Controlled Two-Shaft Gas Turbine/ Jet Engine, "TGDEPC", is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress...
COMPUTER CONTROLLED AXIAL FLOW GAS TURBINE/ JET ENGINE - TGFAC
  • TGFAC
Available
9.9.- MESIN PEMBAKARAN INTERNAL
TGFAC
Computer Controlled Axial Flow Gas Turbine/ Jet Engine
The main element of the "TGFAC" unit is the gas turbine, which consists of:Axial compressor, supplied by atmospheric air that will be compressed afterwards.Annular combustion chamber, where fuel is added to the compressed air and that mixture is...
COMPUTER CONTROLLED SOLAR/HEAT SOURCE VAPOUR TURBINE - HTVC
  • HTVC
Available
5.3.10.- TURBIN STEAM DAN SIKLUS RANKINE ORGANIK
HTVC
Computer Controlled Solar/Heat Source Vapour Turbine
The Computer Controlled Solar/Heat Source Vapour Turbine, "HTVC", has been designed to provide an easily understood vapour power plant and to demonstrate, on a lab scale, the ability to produce shaft power from Solar Radiation.It is a bench-top...
COMPUTER CONTROLLED STIRLING MOTOR - TMSC
  • TMSC
Available
5.3.11.- SISTEM NON-KONVENSIONAL LAINNYA
TMSC
Unit Komputer Kontrol Motor Stirling.
The Computer Controlled Stirling Motor, "TMSC", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it...
STIRLING MOTOR - TMSB
  • TMSB
Available
9.8.- MESIN TERMAL
TMSB
Unit Motor Stirling.
The Stirling Motor, "TMSB", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it can operate an...
COMPUTER CONTROLLED STEAM POWER PLANT ADJUSTABLE UP TO 20 KW - TPTVC/20kW
  • TPTV/20kW/CTS
Available
5.3.10.- TURBIN STEAM DAN SIKLUS RANKINE ORGANIK
TPTV/20kW/CTS
Computer Controlled and Touch Screen 20 kW Steam Power Plant
The Computer Controlled and Touch Screen 20 kW Steam Power Plant,"TPTV/20kW/CTS", allows the detailed study of the power generation cycle using steam as process fluid.In addition to the main TPTV unit, the unit has three required units, Water...
COMPUTER CONTROLLED 1.5 KW STEAM POWER PLANT - TPTVC/1.5kW
  • TPTV/1.5kW/CTS
Available
5.3.10.- TURBIN STEAM DAN SIKLUS RANKINE ORGANIK
TPTV/1.5kW/CTS
Computer Controlled and Touch Screen 1.5 kW Steam Power Plant
The Computer Controlled and Touch Screen 1.5 kW Steam Power Plant,"TPTV/1.5kW/CTS", allows the detailed study of the power generation cycle using steam as process fluid.In addition to the main TPTV unit, the unit has three required units, Water...
COMPUTER CONTROLLED TEST BENCH FOR 2.2 KW ENGINES - TBMC3
  • TBMC3
Available
7.2.3.- MESIN
TBMC3
Bangku Uji Terkendali Komputer untuk 2,2 kW
The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...
COMPUTER CONTROLLED TEST BENCH FOR 7.5 KW ENGINES - TBMC8
  • TBMC8
Available
7.2.3.- MESIN
TBMC8
Bangku Uji Terkendali Komputer untuk 7,5 kW
The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED TEST BENCH FOR 11 KW ENGINES - TBMC12
  • TBMC12
Available
7.2.3.- MESIN
TBMC12
Bangku Uji Terkendali Komputer untuk 11 Kw
The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...
COMPUTER CONTROLLED TEST BENCH FOR 75 KW ENGINES - TBMC75
  • TBMC75
Available
7.2.3.- MESIN
TBMC75
Bangku Uji Terkendali Komputer untuk 75 Kw
The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG
  • TBMC-CG
Available
7.2.3.- MESIN
TBMC-CG
Unit Komputer Kontrol Kalorimeter Saluran Buang Gas.
The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...
EXHAUST GAS ANALYZER - TBMC-AGE
  • TBMC-AGE
Available
7.2.3.- MESIN
TBMC-AGE
Analizer Gas Buang.
Measurement of the volumetric concentrations according to the procedure of nondispersiva infrared absorption.Engines selection: gasoline, butane, propane, 2/4 times, 1/2/3/4/5/6/8/12 cylinders.Fast warm-up of the measure cell.Auto-check...
Meminta informasi