Terlaris

Menampilkan 751 -780 dari 934 produk

MFCE

Available

7.1.3.- STATICS AND DYNAMICS

MFCE

Peralatan untuk Studi Gaya Sentrifugal

The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MBF

Peralatan untuk Studi Gesekan pada Bantalan

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

MELH

Available

7.1.3.- STATICS AND DYNAMICS

MELH

Peralatan untuk Studi Hukum Hooke

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

UNIT TO STUDY THE PRESSURE DROP OF COMPRESSIBLE FLUIDS IN PIPES - PDCFP

PDCFP

Available

8.8.- SISTEM PIPA FLUIDA

PDCFP

Peralatan untuk Studi Kehilangan Tekanan pada Fluida Kompresibel di Pipa

The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATICS AND DYNAMICS

MEMB2

Peralatan untuk Studi Keseimbangan Momen pada Tuas Dua Lengan

The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", has been designed by EDIBON to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme...

UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT

KSGT

Available

7.1.2.2.- RODA GIGI

KSGT

Peralatan untuk Studi Kinematika Kereta Roda Gigi

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF LIQUIDS AND GASES UNIT - TCLGC

TCLGC

Available

9.6.- PERPINDAHAN PANAS

TCLGC

Peralatan untuk Studi Konduktivitas Termal (Cairan-Gas), Dikendalikan dari Komputer (PC)

The Computer Controlled Thermal Conductivity of Liquids and Gases Unit, "TCLGC", has been designed by EDIBON to allow the students to appreciate and understand the heat transfer process through any gas or liquid locked in a solid.By the...

Available

11.1.9.- PERTUKARAN ION DAN KOROSI

EEC

Peralatan untuk Studi Korosi

The Corrosion Study Unit, "EEC", designed by EDIBON, allows the corrosion simultaneous study up to eight corrosion cells.Each sample for the test is put in such away that unwanted secondary effects are eliminated.The cells included a cover to...

COMPUTER CONTROLLED CORROSION STUDY UNIT - EECC

EECC

Available

11.1.9.- PERTUKARAN ION DAN KOROSI

EECC

Peralatan untuk Studi Korosi, Dikendalikan dari Komputer (PC)

The Computer Controlled Corrosion Study Unit, "EECC", designed by EDIBON, allows the corrosion simultaneous study up to eight corrosion cells.Each sample for the test is put in such away that unwanted secondary effects are eliminated.The cells...

UNIT FOR THE STUDY OF POROUS BEDS IN VENTURI TUBES (DARCY´S EQUATION) - FME24

FME24

Available

8.1.8.- PIPA HIDROLIK

FME24

Peralatan untuk Studi Lapisan Pori dalam Pipa Venturi (Persamaan Darcy)

The Unit for the Study of Porous Beds in Venturi Tubes (Darcy´s Equation), "FME24", designed by EDIBON, for the study of porous beds in Venturi tubes (Darcy's Equation), allowing the complete and detailed understanding of this equation.The unit is...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- MEKANIKA STRUKTURAL

MEPE

Peralatan untuk Studi Masalah Stabilitas

The Simple Stability Problems Study Unit, "MEPE", has been designed by EDIBON to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations.The unit consists of two bars of same length connected...

Available

7.1.3.- STATICS AND DYNAMICS

SRI

Peralatan untuk Studi Momen Inersia Rotasional

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MEC

Peralatan untuk Studi Overdrive

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

Available

11.1.12.- PENGOBATAN SOLIDS

QMS

Peralatan untuk Studi Penanganan Material Padat

The Solids Handling Study Unit, "QMS", has been designed by EDIBON to introduce the students in different aspect of solids behaviour, unit operations as size reduction, mixing, transport, discharge, weighing, etc.The unit consists of a bench on...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- ELEKTRONIK DIGITAL

TDS

Peralatan untuk Studi Pengolahan Sinyal Digital, Dikendalikan dari Komputer (PC)

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

COMPUTER CONTROLLED UNIT TO STUDY WATER FLOW PRINCIPLES - WFPC

WFPC

Available

8.4.- VISUALISASI ALIRAN

WFPC

Peralatan untuk Studi Prinsip Aliran Air, Dikendalikan dari Komputer (PC)

The Computer Controlled Unit to Study Water Flow Principles, "WFPC", is composed by both a closed and an open water circuit, thus allowing the observation of fluid's behavior in each of them. The selection of the circuit can be made by means of a...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Aksesori dari RYC/T

Available

6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC

Peralatan untuk Studi Regulasi dan Kontrol, Dikendalikan dari Komputer (PC)

Aksesori dari RYC/T

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...

USSB

Available

8.3.- HIDROSTATIK

USSB

Peralatan untuk Studi Stabilitas pada Kapal

The study of ship stability and the analysis of vibrations that can occur in a vessel are crucial aspects for the construction and development of naval engineering.The Ship Stability Study Unit, "USSB", designed by EDIBON, enables a comprehensive...

VENTURI, BERNOULLI AND CAVITATION UNIT - FME22

FME22

Available

8.1.4.- HIDRODINAMIS

FME22

Peralatan Venturi, Bernoulli, dan Kavitasinya

The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...

DROP BALL VISCOMETER AND RESISTANCE COEFFICIENT DETERMINATION UNIT - HVB

Available

8.2.- PENGUKURAN

HVB

Peralatan Viskosimeter Bola Jatuh dan Penentuan Koefisien Hambatan

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", designed by EDIBON, consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be...

MOBILE BED AND FLOW VISUALIZATION UNIT (WORKING SECTION: 4000X610 MM) - HVFLM-4

HVFLM-4

Available

13.1.- HIDROLOGI DAN HIDROGEOLOGI

HVFLM-4

Peralatan Visualisasi Aliran dan Lapisan Bergerak (bagian kerja: 4000X610 mm)

The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....

HYDROGEN BUBBLE FLOW VISUALIZATION UNIT - UVF

Available

8.4.- VISUALISASI ALIRAN

UVF

Peralatan Visualisasi Aliran menggunakan Gelembung Hidrogen

The Hydrogen Bubble Flow Visualization Unit, "UVF", is a self-contained unit designed to study different flow patterns through the hydrogen bubble flow visualization technique.Bubbles are generated by electrolysis by the application of an electric...

LAMINAR FLOW VISUALIZATION AND ANALYSIS UNIT - LFA

Available

8.4.- VISUALISASI ALIRAN

LFA

Peralatan Visualisasi dan Analisis Aliran Laminar

The Laminar Flow Visualization and Analysis Unit, "LFA", allows a complete study of the two-dimensional problems associated with the laminar flow by the visualization of the different models of flow, which can be observed thanks to an efficient...

AV-WW

Available

2.5.- ELEKTRONIK OTOMOTIF

AV-WW

Peralatan Wiper pada Otomotif

The Automotive Wiper Washer Unit, "AV-WW", provides a practical solution to the introduction of the components of the wiper washer system used in the automotive field nowadays.The components included in the "AV-WW" are focused on different...

POWER PLANTS SIMULATION SOFTWARE - PSV-PPSS

PSV-PPSS

Available

5.1.3.1.- PEMBANGKIT LISTRIK

PSV-PPSS

Perangkat Lunak untuk Simulasi Pembangkit Listrik

To understand the impact of power plants as well as in order to improve its operation, EDIBON has developed a set of SCADA software to simulate power plants, through which teachers, researchers and students will be able to experiment with a wide...

AUTOMATION SYSTEM SIMULATION SOFTWARE - AE-AS

AE-AS

Available

6.1.4.- PERANGKAT LUNAK MECHATRONICS

AE-AS

Perangkat Lunak untuk Simulasi Sistem Otomatisasi

The Automation System Simulation Software, "AE-AS", is designed to perform the following tasks: 2D and 3D simulation of a real automation system, data acquisition, supervision and control (SCADA) with a real automation system through OPC protocol...

CONTROL AND DATA ACQUISITION SYSTEM SOFTWARE FOR ELECTRICAL MACHINES - EM-SCADA

EM-SCADA

Available

4.3.2.2.- MOTOR LISTRIK DC DAN GENERATOR

EM-SCADA

Perangkat Lunak untuk Sistem Kontrol dan Akuisisi Data Mesin Listrik

The Control and Data Acquisition System Software for Electrical Machines, "EM-SCADA", has been developed by EDIBON to study and analyze the performance of rotating and static electrical machines such as three-phase and single-phase AC motors,...

Available

13.1.- HIDROLOGI DAN HIDROGEOLOGI

PPD

Permeameter Drainase

The Drain Permeameter, "PPD", has been designed to measure the permeability of different filter materials when a fluid is passing through them, as well as to determine the most optimal combination of filter/soil.The main element is a transparent...

FME38

Available

8.1.6.- MESIN HIDROLIK: POMPA

FME38

Pompa Ariete Hidrolik

The Hydraulic Ram Pump, "FME38", designed by EDIBON, utilizes the water hammer effect to raise water to a higher level than its power source. It operates by harnessing the rapid change in water velocity in a pipe that occurs when its flow is...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI