Terlaris

Menampilkan 721 -750 dari 916 produk

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- UJI MEKANIK

EEU/20KN

Peralatan Uji Material Universal

The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...

MTTU

Available

7.3.2.1.- UJI MEKANIK

MTTU

Peralatan Uji Tarik

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...

Available

7.3.2.1.- UJI MEKANIK

MTT

Peralatan Uji Torsi (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...

COMPUTER CONTROLLED BIOMEDICAL ULTRASOUND THERMAL EFFECTS TEACHING UNIT - BIUTEC

BIUTEC

Available

14.3.- PERALATAN BIOMEDIS

BIUTEC

Peralatan Ultrasonografi dalam Biomedis, Dikendalikan dari Komputer (PC)

The Computer Controlled Biomedical Ultrasound Thermal Effects Teaching Unit, "BIUTEC", has been designed by EDIBON to study, in an experimental way, the ultrasound effects in biological tissues and acquire the necessary knowledge to design and...

Available

7.3.2.1.- UJI MEKANIK

MUP

Peralatan Universal untuk Tekuk

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

CORIOLIS FORCE DEMONSTRATION UNIT - MDFC

MDFC

Available

7.1.3.- STATICS AND DYNAMICS

MDFC

Peralatan untuk Demonstrasi Gaya Coriolis

The Coriolis Force Demonstration Unit, "MDFC", designed by EDIBON, is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- GETARAN DAN OSILASI

MVCC

Peralatan untuk Penelitian Kecepatan Kritis, Dikendalikan dari Komputer (PC)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

CECI

Available

6.1.1.2.- PENGONTROL INDUSTRI

CECI

Peralatan untuk Pengendali Industri

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...

MSCT

Available

7.4.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

MSCT

Peralatan untuk Pengujian Sambungan Berulir

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

COMPUTER CONTROLLED UNIT TO STUDY FLOW THROUGH PACKED COLUMNS - FPCC

FPCC

Available

11.1.8.- PENYERAPAN DAN ADSORPSI

FPCC

Peralatan untuk Studi Aliran dalam Kolom Pengisi, Dikendalikan dari Komputer (PC)

The main element of the "FPCC" unit is a transparent packed column, which can be used with water, air or both fluids, simulating an absorption column. When working with water, the unit includes a computer controlled speed pump to impel the water...

HECA

Available

8.8.- SISTEM PIPA FLUIDA

HECA

Peralatan untuk Studi Aliran Udara

The Air Flow Studies Unit, "HECA", designed by EDIBON, is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- MEKANIKA STRUKTURAL

MFCS3

Peralatan untuk Studi Deformasi pada Rangka

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF POWER ELECTRONICS (WITH IGBTS) - TECNEL

TECNEL

Available

6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI

TECNEL

Peralatan untuk Studi Elektronika Daya (dengan IGBT), Dikendalikan dari Komputer (PC)

The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- MEKANIKA STRUKTURAL

MFBS

Peralatan untuk Studi Gaya pada Struktur Batang Sederhana (Rangka Sederhana)

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

MFCE

Available

7.1.3.- STATICS AND DYNAMICS

MFCE

Peralatan untuk Studi Gaya Sentrifugal

The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MBF

Peralatan untuk Studi Gesekan pada Bantalan

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

MELH

Available

7.1.3.- STATICS AND DYNAMICS

MELH

Peralatan untuk Studi Hukum Hooke

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- UJI TERMAL DAN AKUSTIK

TIAC

Peralatan untuk Studi Impedansi Akustik/Isolasi Akustik, Dikendalikan dari Komputer (PC)

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

UNIT TO STUDY THE PRESSURE DROP OF COMPRESSIBLE FLUIDS IN PIPES - PDCFP

PDCFP

Available

8.8.- SISTEM PIPA FLUIDA

PDCFP

Peralatan untuk Studi Kehilangan Tekanan pada Fluida Kompresibel di Pipa

The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATICS AND DYNAMICS

MEMB2

Peralatan untuk Studi Keseimbangan Momen pada Tuas Dua Lengan

The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", has been designed by EDIBON to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme...

UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT

KSGT

Available

7.1.2.2.- RODA GIGI

KSGT

Peralatan untuk Studi Kinematika Kereta Roda Gigi

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF LIQUIDS AND GASES UNIT - TCLGC

TCLGC

Available

9.6.- PERPINDAHAN PANAS

TCLGC

Peralatan untuk Studi Konduktivitas Termal (Cairan-Gas), Dikendalikan dari Komputer (PC)

The Computer Controlled Thermal Conductivity of Liquids and Gases Unit, "TCLGC", has been designed by EDIBON to allow the students to appreciate and understand the heat transfer process through any gas or liquid locked in a solid.By the...

Available

11.1.9.- PERTUKARAN ION DAN KOROSI

EEC

Peralatan untuk Studi Korosi

The Corrosion Study Unit, "EEC", allows the corrosion simultaneous study up to eight corrosion cells. This unit allows to study several conditions that influence in the corrosion processes. Each sample for the test is put in such away that...

COMPUTER CONTROLLED CORROSION STUDY UNIT - EECC

EECC

Available

11.1.9.- PERTUKARAN ION DAN KOROSI

EECC

Peralatan untuk Studi Korosi, Dikendalikan dari Komputer (PC)

The Computer Controlled Corrosion Study Unit, "EECC", allows the corrosion simultaneous study up to eight corrosion cells. This unit allows to study several conditions that influence in the corrosion processes. Each sample for the test is put in...

UNIT FOR THE STUDY OF POROUS BEDS IN VENTURI TUBES (DARCY´S EQUATION) - FME24

FME24

Available

8.1.8.- PIPA HIDROLIK

FME24

Peralatan untuk Studi Lapisan Pori dalam Pipa Venturi (Persamaan Darcy)

The Unit for the Study of Porous Beds in Venturi Tubes (Darcy´s Equation), "FME24", designed by EDIBON, for the study of porous beds in Venturi tubes (Darcy's Equation), allowing the complete and detailed understanding of this equation.The unit is...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- MEKANIKA STRUKTURAL

MEPE

Peralatan untuk Studi Masalah Stabilitas

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

Available

7.1.3.- STATICS AND DYNAMICS

SRI

Peralatan untuk Studi Momen Inersia Rotasional

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MEC

Peralatan untuk Studi Overdrive

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

Available

11.1.12.- PENGOBATAN SOLIDS

QMS

Peralatan untuk Studi Penanganan Material Padat

The Solids Handling Study Unit "QMS" is designed to introduce the students in different aspect of solids behaviour, unit operations as size reduction, mixing, transport, discharge, weighing, etc. The unit consists of a bench on which are mounted...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- ELEKTRONIK DIGITAL

TDS

Peralatan untuk Studi Pengolahan Sinyal Digital, Dikendalikan dari Komputer (PC)

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI