8.- MEKANIKA FLUIDA

Cabang Mekanika Fluida mempelajari hukum perilaku fluida pada diam (fluida statika ) atau dalam gerak (fluida dynamics ) dan proses interaksinya dengan benda padat. Fluida dianggap sebagai zat yang dapat mengalir , dengan kata lain bergerak. Diantaranya terdapat zat cair (air, minyak, alkohol, susu, asam sulfat, bensin) dan gas (udara, oksigen, nitrogen, helium, argon, metana, butana, gas alam).

Lihat Lebih Banyak

Cairan dapat ditemukan di mana saja dalam kehidupan sehari-hari, dari udara yang mengelilingi kita, air di kolam renang dan untuk irigasi, sistem hidrolik yang memungkinkan kita untuk mengerem mobil kita, pemanas atau AC, ke sistem darah kita sendiri. Studi fluida didasarkan pada prinsip terkenal Archimedes dan Pascal, persamaan Bernoulli, Venturi efek atau hukum Darcy , antara lain. Bidang Teknik Mekanika Fluida yang mencari penerapan dipelajari secara empiris dan secara matematis, menyoroti bilangan tak berdimensi seperti Reynolds, Prandtl, Mach dan Froude . Pentingnya prinsip mekanika fluida meninggalkan penemuan-penemuan yang umum, seperti air transfer melalui saluran, maritim dan transportasi udara, mesin hidrolik, termal dan pneumatik, solusi untuk masalah kavitasi atau water hammer dalam pipa, hidrolik dan transmisi pneumatik dan kontrol, dll.

Mengingat relevansi fluida dalam berbagai aplikasi, penting untuk mengetahui sifatnya, yaitu jenis fluida dan mendeskripsikannya berdasarkan properti. Yang paling signifikan adalah: tekanan, suhu, volume, kepadatan, viskositas, kompresibilitas, panas spesifik, ekspansi termal, dan daya larut.

Lihat Produk
Materi Terkait
MEKANIKA FLUIDA SUBCATEGORIES

8.1.- LABORATORIUM MODULER MEKANIK FLUIDA

Hidrolika merupakan salah satu cabang ilmu yang membahas tentang sifat mekanik fluida dan Mekanika Fluida merupakan dasar dari Hidrolika. EDIBON mencoba untuk menanggapi, dengan cara yang sederhana dan praktis, permintaan akademis untuk mengajar dan belajar dasar Mekanika Fluida. Untuk melakukan...
lihat

8.2.- PENGUKURAN

Metrologi adalah ilmu yang mempelajari pengukuran magnitudo. Ini didasarkan pada proses yang berusaha untuk membangun hubungan antara nilai referensi dan objek atau fenomena yang besarannya harus dikuantifikasi dan mendapatkan ekspresi dari pengukuran. Pengukuran harus dapat direproduksi dan...
lihat

8.3.- HIDROSTATIK

Hidrostatika adalah cabang dari mekanika fluida yang mempelajari fenomena dan perilaku terkait yang terjadi ketika fluida berada di dalam wadah dan di sana ada kekuatan yang mengubah keadaan cairan saat diam atau bergerak. Sebaliknya, hidrodinamika mempelajari cairan yang bergerak.Hidrostatika...
lihat

8.4.- VISUALISASI ALIRAN

Aliran fluida dibingkai dalam cabang dinamika fluida. Studi fokus pada kompresi pergerakan fluida, dikondisikan oleh hukum Newton dan kekekalan massa dan energi dan hukum seperti Stokes ', bilangan Reynolds atau Prandt, antara lain.Visualisasi pergerakan dan arah fluida berkat jalur arus dan...
lihat

8.5.- SALURAN HIDROLIK

Air adalah elemen fundamental yang digunakan oleh makhluk hidup dan, sejak zaman kuno, berbagai perangkat telah dikembangkan untuk distribusi dan konsumsi, seperti saluran.Saluran hidraulik atau terbuka atau, sederhananya, saluran didefinisikan sebagai sistem perpipaan yang terbuka ke atmosfer...
lihat

8.6.- AERODINAMIKA

Aerodinamika adalah bagian dari mekanika fluida yang mempelajari gas dalam gerakan dan gaya atau reaksi yang menyebabkan benda yang berinteraksi dengan gas-gas tersebut terkena. Selain pentingnya aerodinamika itu sendiri, nilai kontribusinya terhadap aeronautika harus ditambah. Sesuai dengan...
lihat

8.7.- MESIN FLUIDA

Sebuah aplikasi khusus, area komunikasi dalam mekanika fluida adalah yang bertanggung jawab untuk mempelajari fluida mesin. Mesin fluida adalah perangkat yang mengubah energi fluida yang melewatinya atau mentransfer energi ke fluida. Fluida tersebut dapat berupa gas, uap atau cair.Berdasarkan...
lihat

8.8.- SISTEM PIPA FLUIDA

Dalam teknik, sistem perpipaan fluida didefinisikan sebagai struktur atau konstruksi yang mengangkut fluida dari sumber ke < strong>tujuan. Dua jenis saluran dibedakan: saluran tertutup (pipa, terowongan atau gorong-gorong) dan saluran terbuka (arus alami). Aliran dalam saluran tertutup...
lihat

8.9.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...
lihat
MEKANIKA FLUIDA UNITS
Menampilkan 109 -144 dari 168 produk
COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC
  • HTIC
Available
5.3.6.- ENERGI HIDROLIK
HTIC
Computer Controlled Experimental Impulse Turbine
The Computer Controlled Experimental Impulse Turbine, "HTIC", allows to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
COMPUTER CONTROLLED HYDRAULIC TURBINES MODULAR UNIT - HTMC
  • HTMC
Available
8.7.3.- TURBIN
HTMC
Computer Controlled Hydraulic Turbines Modular Unit
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
FRANCIS TURBINE MODEL - HT-F
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-F
Model Turbin Francis
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
AXIAL FLOW TURBINE MODEL - HT-FA
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-FA
Model Turbin Aliran Aksial
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
RADIAL FLOW TURBINE MODEL - HT-FR
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-FR
Model Turbin Aliran Radial
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
KAPLAN TURBINE MODEL - HT-K
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-K
Model Turbin Kaplan
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
PELTON TURBINE MODEL - HT-P
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-P
Model Turbin Pelton
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • EEEC
Available
5.3.3.- ENERGI ANGIN
EEEC
Unit Komputer Kontrol Energi Angin.
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- ENERGI ANGIN
EEE
Unit Energi Angin.
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
COMPUTER CONTROLLED WIND ENERGY BASIC UNIT - MINI-EEEC
  • MINI-EEEC
Available
5.3.3.- ENERGI ANGIN
MINI-EEEC
Unit Dasar Komputer Kontrol Energi Angin.
The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up...
WIND ENERGY BASIC UNIT - MINI-EEE
  • MINI-EEE
Available
5.3.3.- ENERGI ANGIN
MINI-EEE
Unit Dasar Energi Angin.
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
COMPUTER CONTROLLED RECIPROCATING COMPRESSOR UNIT - HCRC
  • HCRC
Available
8.7.5.- KOMPRESOR
HCRC
Computer Controlled Reciprocating Compressor Unit
The Computer Controlled Reciprocating Compressor Unit, "HCRC", allows students to study and test a fluid power machine and to discover how the compressor flow rate relates to the pressure delivered by the compressor. The unit provides a detailed...
COMPUTER CONTROLLED TWO-STAGE COMPRESSOR TEST UNIT - HCDEC
  • HCDEC
Available
8.7.5.- KOMPRESOR
HCDEC
Computer Controlled Two-Stage Compressor Test Unit
The Computer Controlled Two-Stage Compressor Test Unit, "HCDEC", works with compressed air and presents as a principal device a compression bench with two pistons, low and high pressure.This unit presents four circuits or work dispositions which...
COMPUTER CONTROLLED FLOW OF COMPRESSIBLE FLUIDS UNIT - HFCC
  • HFCC
Available
8.7.5.- KOMPRESOR
HFCC
Computer Controlled Flow of Compressible Fluids Unit
The Computer Controlled Flow of Compressible Fluids Unit, "HFCC", allows to study the variation of pressure and density, the speeds of the fluid, the different fluctuations that the fluid presents when fluids across different sections in a pipe,...
FLUID FRICTION IN PIPES UNIT, WITH HYDRAULICS BENCH (FME00) - AFT
  • AFT
Available
8.8.- SISTEM PIPA FLUIDA
AFT
Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00)
The Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings...
FLUID FRICTION IN PIPES UNIT - AFT/P
  • AFT/P
Available
8.8.- SISTEM PIPA FLUIDA
AFT/P
Fluid Friction in Pipes Unit
The Fluid Friction in Pipes Unit, "AFT/P", is designed to determine the friction coefficient in pipes, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.This unit...
PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMT
  • AMT
Available
8.8.- SISTEM PIPA FLUIDA
AMT
Pipe Network Unit, with Hydraulics Bench (FME00)
The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...
PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00/B) - AMT/B
  • AMT/B
Available
8.8.- SISTEM PIPA FLUIDA
AMT/B
Pipe Network Unit, with Hydraulics Bench (FME00/B)
The Pipe Network Unit, without Hydraulics Bench (FME00), "AMT/B", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to...
MESH IN PIPE UNIT - AMT/P
  • AMT/P
Available
8.8.- SISTEM PIPA FLUIDA
AMT/P
Mesh in Pipe Unit
The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...
COMPUTER CONTROLLED WATER HAMMER UNIT - EGAC
  • EGAC
Available
8.8.- SISTEM PIPA FLUIDA
EGAC
Computer Controlled Water Hammer Unit
The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....
COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC
  • TSCAC
Available
9.2.- PEMANASAN, VENTILASI, AC DAN AIR PANAS
TSCAC
Computer Controlled Air Duct Systems Unit
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...
AIR FLOW STUDIES UNIT - HECA
  • HECA
Available
8.8.- SISTEM PIPA FLUIDA
HECA
Air Flow Studies Unit
The Air Flow Studies Unit, "HECA", is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit is mounted on a...
UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM
  • ANVCM
Available
8.9.1.- MODEL BAGIAN
ANVCM
Unit to Study an Angular Needle Valve Cutaway Model
The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- MODEL BAGIAN
BVCM
Unit to Study a Ball Valve Cutaway Model
The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM
  • LNVCM
Available
8.9.1.- MODEL BAGIAN
LNVCM
Unit to Study a Lift Non-return Valve Cutaway Model
The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...
UNIT TO STUDY A NON-RETURN BUTTERFLY VALVE CUTAWAY MODEL - NBVCM
  • NBVCM
Available
8.9.1.- MODEL BAGIAN
NBVCM
Unit to Study a Non-return Butterfly Valve Cutaway Model
The Unit to Study a Non-Return Butterfly Valve Cutaway Model, "NBVCM", allows the students to visualize the inner parts of a butterfly valve, to evaluate the relation with each other accurately and to understand their function.It is a valve to...
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- MODEL BAGIAN
PMFCM
Unit to Study a Pipe Mesh Filter Cutaway Model
The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
UNIT TO STUDY A STRAIGHT-WAY NEEDLE VALVE CUTAWAY MODEL - SNVCM
  • SNVCM
Available
8.9.1.- MODEL BAGIAN
SNVCM
Unit to Study a Straight-way Needle Valve Cutaway Model
The Unit to Study a Straight-Way Needle Valve Cutaway Model, "SNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with...
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- MODEL BAGIAN
WMCM
Unit to Study a Water Meter Cutaway Model
The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
Meminta informasi