NEW Basic Mechanics course
Ler mais7.1.- ENGENHARIA MECÂNICA
Engenharia mecânica é a aplicação de física aos elementos que nos rodeiam para melhorar os dispositivos mecânicos existentes ou criar novos dispositivos. Uma vez que se baseia em princípios físicos, a sua origem remonta à origem desses princípios e o seu desenvolvimento está estreitamente ligado aos avanços em mecânica. No entanto, não foi até à invenção do motor vapor que se tornou um dos pilares do desenvolvimento da indústria.
Ver maisA Revolução Industrial do século XVII teve lugar como resultado da criação deste dispositivo. A partir desse momento, com as contribuições de cientistas e engenheiros tão importantes como Watt, Stephenson, Tesla ou Rankine, iniciou-se uma renovação sem precedentes tanto do conceito como do desenvolvimento de novas máquinas.
O conceito de indústria, como era conhecido até esse momento, mudou com o desenvolvimento dessas máquinas. Produção de massa foi implementada, máquina desenhos foram melhorados e, consequentemente, a gama de processos de produção foi aumentada, resultando numa variedade impensável de novos produtos adaptados às necessidades da sociedade.
Na engenharia mecânica, vale a pena mencionar os seguintes campos de estudo e aplicação:
- Mecanismos.
- Estruturas.
- Dinâmica.
- Vibrações.
- Oscilações.
No presente, qualquer indústria, desde alimentos até aeroespacial, debe estar ao mais alto nível de tecnologia inovação. Portanto, pesquisa e desenvolvimento de novos dispositivos é particularmente importante ter sempre o mais recente tecnologia e estar ao nível exigido pela indústria 4.0.
Ver produtos
Materiais Relacionados
ENGENHARIA MECÂNICA UNITS
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVLF
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MEVLB
Equipamento de Estudo de Vibração Livre em Barras
The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MOT
Equipamento de Oscilação Torcional
The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVCC
Equipamento para Estudo da Velocidade Crítica, Controlado por Computador (PC)
Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC". The operation of the "MVCC"...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MEER
Equipamento de Estudo de Rotação de Eixos
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MCF
Equipamento de Correia de Fricção
The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEF
Equipamento de Estudo de Fricção
The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MPCO
Equipamento de Estudo da Distribuição de Pressão em Rolamentos
The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT
Equipamento Modular de Tribologia
The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-UB
Equipamento de Acionamento para Ensaios Tribológicos
Acessório de
MEMT
This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-1
Distribuição de Pressão Radial em Rolamento Deslizante
Acessório de
MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-2
Fricção Dinâmica de um Cilindro em um Rolo
Acessório de
MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-3
Fricção Dinâmica de um Pino em um Disco
Acessório de
MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-4
Atrito por Rolamento em Rodas
Acessório de
MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-5
Lubrificação Elastohidrodinâmica
Acessório de
MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MEMT-6
Vibração por Fricção
Acessório de
MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MCD
Equipamento de Cilindro Fino
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MBF
Equipamento para o Estudo de Atrito em Rolamentos
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)
MCF/A
Equipamento de Correia de Fricção com Dinamômetros
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
7.1.6.- MECÂNICA DE ESTRUTURAS
MCPG
Equipamento de Cilindro de Parede Espessa
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
7.1.6.- MECÂNICA DE ESTRUTURAS
MFPG
Equipamento de Estudo de Forças em Guindaste de Lança
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
7.1.6.- MECÂNICA DE ESTRUTURAS
MVS
Equipamento de Ponte Suspensa
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
7.1.6.- MECÂNICA DE ESTRUTURAS
MARP
Equipamento de Arco Parabólico
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
7.1.6.- MECÂNICA DE ESTRUTURAS
MART
Equipamento de Arco Tri articulado
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...