7.1.6.- MECÂNICA DE ESTRUTURAS

MECÂNICA DE ESTRUTURAS UNITS

1.- FÍSICA 2.- ELETRÔNICA 3.- COMUNICAÇÕES 4.- ELETRICIDADE 5.- ENERGIA 6.- MECATRÔNICA E AUTOMAÇÃO 7.- MECÂNICA 8.- MECÂNICA DE FLUIDOS 9.- TERMODINÂMICA E TERMOTÉCNICA 10.- CONTROLE DE PROCESSOS 11.- ENGENHARIA QUÍMICA 12.- TECNOLOGIA DE ALIMENTOS E ÁGUAS 13.- MEIO AMBIENTE 14.- ENGENHARIA BIOMÉDICA ACESSÓRIOS DE LABORATÓRIO PLANTAS PILOTO PERSONALIZADAS
7.1.- ENGENHARIA MECÂNICA 7.2.- ENGENHARIA MECÂNICA AUTOMOTIVA 7.3.- ENGENHARIA DE MATERIAIS 7.4.- INSTALAÇÕES E MANUTENÇÃO
7.1.1.- KITS DE FUNDAMENTOS DE MECÂNICA 7.1.2.- MÁQUINAS SIMPLES 7.1.3.- ESTÁTICA E DINÂMICA 7.1.4.- VIBRAÇÕES E OSCILAÇÕES 7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO) 7.1.6.- MECÂNICA DE ESTRUTURAS
Não há subgrupos disponíveis
Mostrando 13-23 de um total de 23 produto(s)
12 24 36
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MECÂNICA DE ESTRUTURAS

MEPE

Equipamento para Estudo de Problemas de Estabilidade

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
Ver Equipamento
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGIA (ATRITO, DESGASTE, LUBRIFICAÇÃO)

MCD

Equipamento de Cilindro Fino

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
Ver Equipamento
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MECÂNICA DE ESTRUTURAS

SSM

Equipamento para o Estudo de Tensões em uma Membrana

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
Ver Equipamento
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MECÂNICA DE ESTRUTURAS

MVV

Equipamento de Vigas Cantiléver

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
Ver Equipamento
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MDB

Equipamento de Deflexão em Barras Curvas

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
Ver Equipamento
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MFV

Demonstrador de Deflexão em Vigas

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Ver Equipamento
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MFLT

Equipamento de Flambagem em Barras

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Ver Equipamento
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MEBM

Equipamento de Modos de Flambagem de Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Ver Equipamento
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MUP

Equipamento Universal de Flambagem

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Ver Equipamento
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- ENSAIOS MECÂNICOS

MMF

Equipamento de Momento Fletor e Força de Corte

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...
Ver Equipamento
Solicitar informação