AE-PLC-FS Estação de Enchimento

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

SISTEMAS INOVADORES

The Filling Workstation, "AE-PLC-FS", has been designed by EDIBON to study how to manage a filling system.

Ver descrição geral

Catálogo

Especificações de Concurso

Expansões

ICAI

Software Interativo para Educação Assistida por Computador

NOTÍCIAS RELACIONADAS

Descrição Geral

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves. The "AE-PLC-FS" is equipped with magnetic and flow sensors in order to obtain a precise filling of the bottles.

The "AE-PLC-FS" workstation has been designed as a modular system to facilitate the understanding of the unit operation.

The main components are:

The PLC: is composed by the CPU limit and all extra modules needed to perform a corrent working of the workstation and all the extra modules needed to perform a correct working of the workstation.
The Control Panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
The Pneumatic Circuit: contains the required solenoid valves, the pressure components, the filters and regulators to assure the appropriate working of the unit.
The Workstation: it is composed by real industrial components used by the rotary table systems such as reed sensors, presence sensors, DC motor, inductive sensors, rotary table with 8 positions, etc.

The "AE-PLC-FS" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing System (*).

*The Flexible manufacturing systems product list is available at the "6.- MECHATRONICS and AUTOMATION" area.

EXERCÍCIOS E PRÁTICAS GUIADAS

EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL

Introduction to flexible manufacturing system (FMS).
Introduction to pneumatics and electro-pneumatics.
Introduction to vacuum technology.
Study of the sensor detection.
Configuration of a pneumatic application.
Manual control of a filling system.
Automatic control of a filling system.
Change the parameters of the filling process.
Optimization of the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

ELEMENTOS NECESSÁRIOS

ELEMENTOS ADICIONAIS RECOMENDADOS

AE-AS

EQUIPAMENTOS SIMILARES DISPONÍVEIS

AE-PLC-FT

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-FT

Estação de Filtragem

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...

AE-PLC-MS

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-MS

Estação de Mistura

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...

AE-PLC-PHD

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-PHD

Estação de Perfuração

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...

AE-PLC-CRS

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-CRS

Estação de Aplicação de Rolha

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-APB

Estação de Abertura de Garrafas

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AE-PLC-M

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-M

Estação de Montagem

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

AE-PLC-P

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-P

Estação de Prensagem Automática

The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...

AE-PLC-AT

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-AT

Estação Parafusadeira Automática

The Automatic Screwdriving Workstation, "AE-PLC-AT", designed by EDIBON, is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece.The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take...

AE-PLC-MEMB

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-MEMB

Estação de Envasamento

The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...

AE-PLC-MET

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-MET

Estação de Etiquetagem

The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...

AE-PLC-ST

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-ST

Estação de Furação

The Drilling Workstation, "AE-PLC-ST", designed by EDIBON, is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine...

AE-PLC-SMOLD

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-SMOLD

Estação de Moldagem

The Molding Workstation, "AE-PLC-SMOLD", designed by EDIBON, is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a...

AE-PLC-SCOR

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-SCOR

Estação de Corte

The Cutting Workstation "AE-PLC-SCOR", designed by EDIBON, is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- APLICAÇÕES DE ESTAÇÕES DE TRABALHO DE PROCESSOS

AE-PLC-CP

Estação de Controle de Processos

The Process Control Workstation, "AE-PLC-CP", designed by EDIBON, is a process control workstation commanded by a PLC that coordinates.The "AE-PLC-CP" workstation is designed as a modular system to facilitate the understanding of the unit.The main...