On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
AEL-SERIN/CA-1KW 1 kW AC Industrial Servomotor Application
SISTEMAS INOVADORES
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors.
NOTÍCIAS RELACIONADAS
Descrição Geral
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors.
The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of the mechanical parameters of a servomotor.For this purpose, the application includes a servomotor along with its control module and two digital meters to monitor speed and torque values throughout the whole process.
In addition, once this knowledge has been acquired the user will be able, if desired, to carry out manual tests for rotating electrical machines with the goal of setting different operating conditions to obtain its characteristic curves and parameters.
In order to carry out advanced electrodynamic tests for rotating electrical machines, it is recommended to acquire the Control and Data Acquisition System Software for Electrical Machines, "EM-SCADA". This advanced software allows monitoring waveforms for voltage, current, torque and speed for the in-depth study of the electrical machines to be tested.
EXERCÍCIOS E PRÁTICAS GUIADAS
EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL
- Wiring and starting up the AC servomotor.
- Start/Stop operations of the servomotor.
- Speed control operation.
- Torque control operation.
- Warnings through alarm.
EXERCÍCIOS MAIS PRÁTICOS A SEREM FEITOS COM A UNIDADE
Some practical possibilities in case of acquiring at least one electrical machine application:
- Start-up of the electrical machine coupled to the servomotor.
- Introducing the braking torque.
- Monitoring of the electrical and mechanical parameters of the rotating machine under different operating conditions.
- Electrodynamic study of the machine.
- Obtaining the characteristic curves of the machine by means of manually controlled braking tests (torque-speed, torque-current etc.)
Practical exercises with the recommended Software, "EM-SCADA":
- Real time torque monitoring.
- Real time speed monitoring.
- Real time monitoring of current and voltage RMS values.
- Real time monitoring of current and voltage waveforms.
- Advanced electrodynamic study of the machine.
- Automatic braking test and monitoring of the results.
- Obtaining the characteristic curves of the machine (torque-speed, torque-current etc).
- Saving and comparison of results.
EQUIPAMENTOS SIMILARES DISPONÍVEIS
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CC
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CA
Equipamento de Servosistemas Industriais (motores de CA) Avançado, Controlado por Computador (PC)
The "SERIN/CA" trainer consists on a Control Interface Box connected to a three-phase motor and to a computer (computer not included). The control interface has a resolver for three-phase motors that controls the speed, position and currentof the...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CCB
Treinador Básico de Servosistemas, (para motores de CC)
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
2.4.2.- SERVOMOTORES ELÉTRICOS
AE-BMI
Brushless Motor Industrial Application
The Brushless Motor Industrial Application, "AE-BMI", is designed to perform the most common control used in the industry: the position control. The "AE-BMI" application allows the student to configure up to four positions with all the parameters...
2.4.2.- SERVOMOTORES ELÉTRICOS
AE-SMI
Servomotor Industrial Application
The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...
EQUIPAMENTOS COMPLEMENTARES
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
TECNEL
Equipamento para o Estudo de Eletrônica de Potência, Controlado por Computador (PC)
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
TECNEL/B
Equipamento Básico para o Estudo de Eletrônica de Potência, Controlado por Computador (PC)
The Computer Controlled Basic Teaching Unit for the Study of Power Electronics (no IGBTS). (Converters: AC/DC+AC/AC), "TECNEL/B", is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CC
Equipamento de Servosistemas Industriais (motores de CC) Avançado, Controlado por Computador (PC)
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CCB
Treinador Básico de Servosistemas, (para motores de CC)
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
6.1.2.2.- ELETRÔNICA DE POTÊNCIA E ELETRÔNICA INDUSTRIAL
SERIN/CA
Equipamento de Servosistemas Industriais (motores de CA) Avançado, Controlado por Computador (PC)
The "SERIN/CA" trainer consists on a Control Interface Box connected to a three-phase motor and to a computer (computer not included). The control interface has a resolver for three-phase motors that controls the speed, position and currentof the...
5.3.3.- ENERGIA EÓLICA
AEL-WPP
Wind Power Plants with Double Feed Induction Generator Application
The Wind Power Plants with Double Feed Induction Generator Application, "AEL-WPP", is used to investigate the design and operation of modern wind power stations. The "AEL-WPP" consists of a prime motor that moves a double-feed induction generator...
5.3.3.- ENERGIA EÓLICA
AEL-WPT
Wind Power Application with Permanent Magnets Synchronous Generator
Considering the above, this application allows experimental investigation on the conversion of wind energy into electricity by means of a wind power generator. The system configuration is stand-alone (isolated from the grid). The equipment is...
5.3.3.- ENERGIA EÓLICA
AEL-WPPIC
Computer Controlled Wind Power Plants Application with Induction Generator
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed for the study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated...
5.3.3.- ENERGIA EÓLICA
AEL-WPPI
Wind Power Plants with Induction Generator Application
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.1.3.2.- TRASMISSÃO DE ENERGIA
AEL-PWEC
Power Electronics Application, with SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
Qualidade

Serviço pós-venda
