8.1.- 유체 역학 모듈 식 실험실

유체역학은 유체의 물리적 특성을 다루는 과학의 한 분야이며, 유체 역학은 유체역학의 기초입니다. EDIBON은 유체 역학의 기초를 가르치고 배우기 위한 학문적 요구에 간단하고 실용적인 응답을 제공하는 것을 목표로 하고 있습니다. 이를 위해 유연하고 모듈식 시스템을 제공하여 기본 유체 역학을 학습할 수 있습니다.

제안된 모듈 시리즈를 통해 학생들은 실험을 수행하여 유체역학 법칙을 명확히 보여줍니다. 이러한 실험을 통해 학생들은 유체 기구 및 도구 사용에 대한 경험을 자연스럽고 즐겁고 간단한 방식으로 얻게 됩니다.

유체역학 실험실에 포함된 장비는 유체 특성 연구, 유량 측정 및 제어, 유체 역학을 지배하는 주요 현상 및 원리에 대한 연구 및 산업에서 널리 사용되는 장비를 이해할 수 있게 해줍니다.

제품보기

유체 역학 모듈 식 실험실 장비

Showing 1-36 of 45 item(s)

BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA

LIFLUBA

Available

8.1.7.- 유압 기계: 터빈

LIFLUBA

Basic Fluids Mechanics Integrated Laboratory

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...

FME00

Available

8.1.1.- 기본 단위

FME00

Hydraulics Bench

The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...

FME00/B

Available

8.1.1.- 기본 단위

FME00/B

Basic Hydraulic Feed System

The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.

FME02

Available

8.1.2.- 측정

FME02

Flow over Weirs

The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...

FME10

Available

8.1.2.- 측정

FME10

Dead Weight Calibrator

The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis...

FME37

Available

8.1.2.- 측정

FME37

유량계 보정기

The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...

FME18

Available

8.1.2.- 측정

FME18

Flow Meter Demonstration

The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...

DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26

FME26

Available

8.1.2.- 측정

FME26

Depression Measurement System (vacuum gauge)

The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...

FME30

Available

8.1.2.- 측정

FME30

Transparent Vortex Flow Meter

The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...

FME30/I

Available

8.1.2.- 측정

FME30/I

Vortex Flow Meter

The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...

FME32

Available

8.1.2.- 측정

FME32

피토 정적 튜브

The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...

FME34

Available

8.1.2.- 측정

FME34

Fluid Statics and Manometry

The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...

FME36

Available

8.1.2.- 측정

FME36

Rotameter

The Rotameter, "FME36", designed by EDIBON, is a variable area flowmeter with floater. This type of flowmeter can be used for flow measurements in almost any environment.The operation mode of this type of flowmeter is based on the fact that if a...

FME38

Available

8.1.6.- 유압 기계 : 펌프

FME38

수력 램 펌프

The Hydraulic Ram Pump, "FME38", designed by EDIBON, utilizes the water hammer effect to raise water to a higher level than its power source. It operates by harnessing the rapid change in water velocity in a pipe that occurs when its flow is...

DATA ACQUISITION SYSTEM AND SENSORS - BDAS

BDAS

Available

8.1.7.- 유압 기계: 터빈

BDAS

Data Acquisition System and Sensors

BDAS is designed to monitor the measurements of each unit type "FME" from a computer (PC).This system can monitor any unit, checking the revolutions given by the water pump or the torque, differential pressures for Bernoulli theorems, pressure...

FME08

Available

8.1.3.- 수압

FME08

Hydrostatic Pressure

The Surface Pressure Unit, "FME08", designed by EDIBON, allows to study the center of pressures with a partially or totally submerged quadrant.This unit consists of a quadrant mounted on the arm of a balance that pivots around an axis.When the...

FME11

Available

8.1.3.- 수압

FME11

Metacentric Height Demostration

The Metacentric Height Demonstration Unit, "FME11", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height.The unit consists of a floating methacrylate prismatic base, on which a vertical...

FME11-A

Available

8.1.3.- 수압

FME11-A

떠 다니는 "V"모양의 물체의 메타 중심 높이 데모

The Metacentric Height Demostration of a "V" Shaped Floating Object, "FME11-A", designed by EDIBON, allows the study of the stability of a floating object by calculating the metacentric height of a floating object starting from a V-shaped floating...

METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B

FME11-B

Available

8.1.3.- 수압

FME11-B

U모양 플로팅 개체의 메타 중심 높이 설명

The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...

PASCAL'S PRINCIPLE DEMONSTRATION - FME33

FME33

Available

8.1.3.- 수압

FME33

파스칼의 원리 시연

The Pascal's Principle Demonstration Unit, "FME33", designed by EDIBON, allows to demonstrate Pascal's principle, i.e. that the pressure in an incompressible fluid is independent of the column size section but depends only on its height (liquid...

FME35

Available

8.1.3.- 수압

FME35

Fluid Properties

The Fluid Properties Unit, "FME35", designed by EDIBON, allows the study of the fluids fundamental properties that affect their behavior in practical applications.We can study capillarity, density and relative density (specific gravity), buoyancy...

FME01

Available

8.1.4.- 수압

FME01

표면에 대한 제트 충격

The unit consists of a cylindrical tank with lateral transparent surfaces where a nozzle, connected to the Hydraulics Bench (FME00), is aligned with a device in which the problem surface is fitted. The vertical force made by the water against the...

BERNOULLI'S THEOREM DEMONSTRATION - FME03

FME03

Available

8.1.4.- 수압

FME03

Bernoulli's Theorem Demonstration

The Bernoulli's Theorem Demonstration unit, "FME03", designed by EDIBON is mainly composed of a circular section pipe with the shape of a truncated cone, transparent and with seven pressure taps that allows to measure, simultaneously, the static...

FME04

Available

8.1.4.- 수압

FME04

Orifice Discharge

The Orifice Discharge Unit, "FME04", designed by EDIBON allows the study of the different concentration, discharge and velocity coefficients for thin and/or thick wall for different types: colloidal, Venturi or diaphragm.The unit consists of a...

FME14

Available

8.1.4.- 수압

FME14

Free and Forced Vortex

The Forced and Free Vortex unit, "FME14", designed by EDIBON, allows the study of the fluid rotation in relation to an axis and the study of circular flow at changing velocities.The unit has a cylindrical and transparent deposit with two inlet...

FME17

Available

8.1.4.- 수압

FME17

Orifice and Free Jet Flow

The Orifice and Free Jet Flow unit, "FME17", designed by EDIBON, allows the study of the different discharge and velocity coefficients in permanent or variable regime as well as the calculation of the discharge times.The unit consists of a...

CAVITATION PHENOMENON DEMONSTRATION - FME19

FME19

Available

8.1.4.- 수압

FME19

Cavitation Phenomenon Demonstration

The Cavitation Phenomenon Demonstration unit, "FME19", designed by EDIBON is composed of a Venturi tube with a rectangular cross section, one of its sides being transparent, allowing a better visualization of the cavitation phenomenon.It includes...

VENTURI, BERNOULLI AND CAVITATION UNIT - FME22

FME22

Available

8.1.4.- 수압

FME22

Venturi, Bernoulli and Cavitation Unit

The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...

FME06

Available

8.1.5.- 흐름 시각화

FME06

Osborne Reynolds 데모

The Osborne Reynolds Demonstration Unit, "FME06", designed by EDIBON, consists of a cylindrical tank endowed with a nozzle, that is fitted to a methacrylate pipe, which allows the fluid visualization.A spillway guarantees the homogeneity of the...

FME09

Available

8.1.5.- 흐름 시각화

FME09

Flow Visualization in Channels

The Flow Visualization in Channels unit, "FME09", designed by EDIBON, allows the visualization of liquid spillage phenomena in weirs and the study of objects submerged in a fluid stream (aerodynamics).The unit consists of a transparent...

FME20

Available

8.1.5.- 흐름 시각화

FME20

Laminar Flow Demonstration

The Laminar Flow Demostration unit, "FME20", designed by EDIBON, allows a complete study of the bi-dimensional problems associated with laminar flow. Thanks to an efficient system of dye injection we can observe the different models of flow. It...

FME25

Available

8.1.5.- 흐름 시각화

FME25

유체 채널, 길이 : 1m

The Flow Channel, lenght: 1 m, "FME25", designed by EDIBON, allows to study of the water behavior flowing through a channel.It basically consists of a channel of rectangular cross section with transparent walls, through which water flows.It has a...

HORIZONTAL OSBORNE REYNOLDS DEMONSTRATION - FME31

FME31

Available

8.1.5.- 흐름 시각화

FME31

수평 Osborne Reynolds 데모

The Osborne Reynolds Horizontal Demonstration Unit, "FME31", designed by EDIBON, allows to study the characteristics of a liquid flowing through a pipe and the Reynolds number in each of the liquid states.The FME31 unit makes it possible to study...

FME12

Available

8.1.6.- 유압 기계 : 펌프

FME12

Series/Parallel Pumps

The Series/Parallel Pumps unit, "FME12", designed by EDIBON, allows the study of the coupling between two series/parallel centrifugal pumps, obtaining the characteristic curves as well as the calculation of the water flow rate.The unit consists of...

CENTRIFUGAL PUMP CHARACTERISTICS - FME13

FME13

Available

8.1.6.- 유압 기계 : 펌프

FME13

Centrifugal Pump Characteristics

The Centrifugal Pump Characteristics, "FME13", designed by EDIBON, allows the study of several centrifugal pump characteristics such as efficiency, series/parallel couplings, etc.The unit has a centrifugal pump with similar characteristics to the...

FME16

Available

8.1.7.- 유압 기계: 터빈

FME16

Pelton Turbine

The Pelton Turbine unit, "FME16", designed by EDIBON, allows the study of the characteristics of the tangential wheels or pressure turbines commonly used to produce electricity in hydroelectric plants to exploit large hydraulic jumps of low...

추가 정보는 미국에 문의하십시오