Terlaris
Menampilkan 91 -120 dari 916 produk
12 24 36
COMPUTER CONTROLLED TEACHING CURDLING TANK - CCDC
  • CCDC
Available
12.2.- PERAWATAN PRODUK PERHARIAN
CCDC
Bak Koagulasi Didaktik, Dikendalikan dari Komputer (PC)
The Computer Controlled Teaching Curdling Tank, "CCDC", is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet for the water of...
Lihat Unit
HYDROSTATICS BENCH & FLUID PROPERTIES - BHI
  • BHI
Available
8.3.- HIDROSTATIK
BHI
Banco Hidrostatik dan Sifat-sifat Fluida
The Hydrostatics Bench and Fluid Properties, "BHI", is a compact, mobile and independent unit.There is a water storage tank, to work in a closed system, at the bottom of the bench. The water is distributed by hand pumps from this tank to two upper...
Lihat Unit
AERODYNAMIC TESTING BENCH - ATBB
  • ATBB
Available
8.6.- AERODINAMIKA
ATBB
Bangku Uji Aerodinamis
The Aerodynamic Testing Bench, "ATBB", designed by EDIBON , has two main components: a radial fan with speed control and a working section where the different accessories for the tests are fixed.The radial blower impels the air through an air...
Lihat Unit
COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER AND TWO-CYLINDERS ENGINES, 11 KW - TBMC12
  • TBMC12
Available
7.2.3.- MESIN
TBMC12
Bangku Uji Motor 11 kW, Dikendalikan dari Komputer (PC)
The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...
Lihat Unit
COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3
  • TBMC3
Available
7.2.3.- MESIN
TBMC3
Bangku Uji Motor 2,2 kW, Dikendalikan dari Komputer (PC)
The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...
Lihat Unit
COMPUTER CONTROLLED TEST BENCH FOR FOUR-CYLINDERS ENGINES, 75 KW - TBMC75
  • TBMC75
Available
7.2.3.- MESIN
TBMC75
Bangku Uji Motor 75 kW, Dikendalikan dari Komputer (PC)
The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
Lihat Unit
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- POMPA
PBAC
Bangku Uji Pompa Aksial, Dikendalikan dari Komputer (PC)
The Computer Controlled Axial Pump Bench, "PBAC", has been designed by EDIBON to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve....
Lihat Unit
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PBEC
Available
8.7.1.- POMPA
PBEC
Bangku Uji Pompa Gigi, Dikendalikan dari Komputer (PC)
The Computer Controlled Gear Pump Bench, "PBEC", designed by EDIBON, is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...
Lihat Unit
SERIES/PARALLEL PUMPS BENCH - PBSPB
  • PBSPB
Available
8.7.1.- POMPA
PBSPB
Bangku Uji Pompa Seri/Paralel
The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...
Lihat Unit
POWER SUPPLY - FACO
Available
2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT DAN ACCESSORIES
FACO
Catu Daya
Aksesori dari LICOMBA
Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.
Lihat Unit
JET IMPACT ON SURFACES - FME01
  • FME01
Available
8.1.4.- HIDRODINAMIS
FME01
Dampak Jet pada Permukaan
The Jet Impact on Surfaces Unit, "FME01", designed by EDIBON, allows the study of the interaction between a moving fluid jet and different impact surfaces, providing a detailed understanding of fluid dynamics principles and their application in...
Lihat Unit
CAVITATION PHENOMENON DEMONSTRATION - FME19
  • FME19
Available
8.1.4.- HIDRODINAMIS
FME19
Demonstras Penomena Kavitasi
The Cavitation Phenomenon Demonstration unit, "FME19", designed by EDIBON is composed of a Venturi tube with a rectangular cross section, one of its sides being transparent, allowing a better visualization of the cavitation phenomenon.It includes...
Lihat Unit
LAMINAR FLOW DEMONSTRATION - FME20
  • FME20
Available
8.1.5.- VISUALISASI ALIRAN
FME20
Demonstrasi Aliran Kental
The Laminar Flow Demostration unit, "FME20", designed by EDIBON, allows a complete study of the bi-dimensional problems associated with laminar flow. Thanks to an efficient system of dye injection we can observe the different models of flow. It...
Lihat Unit
FLOW METER DEMONSTRATION - FME18
  • FME18
Available
8.1.2.- PENGUKURAN
FME18
Demonstrasi Flowmeter
The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...
Lihat Unit
HORIZONTAL OSBORNE REYNOLDS DEMONSTRATION - FME31
  • FME31
Available
8.1.5.- VISUALISASI ALIRAN
FME31
Demonstrasi Horisontal Osborne Reynolds
The Osborne Reynolds Horizontal Demonstration Unit, "FME31", designed by EDIBON, allows to study the characteristics of a liquid flowing through a pipe and the Reynolds number in each of the liquid states.The FME31 unit makes it possible to study...
Lihat Unit
METACENTRIC HEIGHT DEMONSTRATION - FME11
  • FME11
Available
8.1.3.- HIDROSTATIS
FME11
Demonstrasi Ketinggian Metasentris
The Metacentric Height Demonstration Unit, "FME11", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height.The unit consists of a floating methacrylate prismatic base, on which a vertical...
Lihat Unit
OSBORNE REYNOLDS' DEMONSTRATION - FME06
  • FME06
Available
8.1.5.- VISUALISASI ALIRAN
FME06
Demonstrasi Osborne Reynolds
The Osborne Reynolds Demonstration Unit, "FME06", designed by EDIBON, consists of a cylindrical tank endowed with a nozzle, that is fitted to a methacrylate pipe, which allows the fluid visualization.A spillway guarantees the homogeneity of the...
Lihat Unit
FLOW METERS DEMONSTRATION - FMDU
  • FMDU
Available
8.2.- PENGUKURAN
FMDU
Demonstrasi Pengukur Aliran
Flow Meters Demonstration, "FMDU", designed by EDIBON, demonstrates the important characteristics of fifteen types of flow meters used in the measurement of water flow through pipes or open channels.The main element is the FMDU Base Unit,...
Lihat Unit
PASCAL'S PRINCIPLE DEMONSTRATION - FME33
  • FME33
Available
8.1.3.- HIDROSTATIS
FME33
Demonstrasi Prinsip Pascal
The Pascal's Principle Demonstration Unit, "FME33", designed by EDIBON, allows to demonstrate Pascal's principle, i.e. that the pressure in an incompressible fluid is independent of the column size section but depends only on its height (liquid...
Lihat Unit
BERNOULLI'S THEOREM DEMONSTRATION - FME03
  • FME03
Available
8.1.4.- HIDRODINAMIS
FME03
Demonstrasi Teorema Bernoulli's
The Bernoulli's Theorem Demonstration unit, "FME03", designed by EDIBON is mainly composed of a circular section pipe with the shape of a truncated cone, transparent and with seven pressure taps that allows to measure, simultaneously, the static...
Lihat Unit
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- UJI MEKANIK
MFV
Demonstrator Lenturan Balok
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Lihat Unit
MACHINE DIAGNOSIS - MDU
  • MDU
Available
7.4.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
MDU
Diagnosa Mesin
The family of Machine Diagnosis Unit, "MDU", of Edibon, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...
Lihat Unit
DIFFERENTIAL-CROWNWHEEL AND PINION - MDC
  • MDC
Available
7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI
MDC
Diferensial Mobil. Mahkota Gigi dan Pinion
The Differential-Crownwheel and Pinion, "MDC", designed by EDIBON, simulates a differential mechanism. The function of the differential mechanism is to enable the drive wheels rotate at different speeds, regardless of whether they are the front or...
Lihat Unit
Meminta informasi