Terlaris
Menampilkan 73 -108 dari 921 produk
PNEUMATIC AND ELECTRO-PNEUMATIC APPLICATION - AE-NS
  • AE-NS
Available
6.1.3.2.- PNEUMATIKA
AE-NS
Aplikasi Pneumatik dan Elektropneumatik
The Pneumatic and Electro-Pneumatic Application, "AE-NS", is a modular application consisting of a great variety of optional kits and elements to configure the desired pneumatic and electro-pneumatic circuits.The optional pneumatic kits available...
ADVANCED POWER FACTOR COMPENSATION APPLICATION - AEL-EECFP
  • AEL-EECFP
Available
5.1.3.3.- DISTRIBUSI DAYA DAN BEBAN
AEL-EECFP
Aplikasi Regulasi Faktor Daya Lanjutan
Industrial customers use three-phase power consumption with different power factors. If their power factor drops below a prescribed value, power losses in transmission lines increase. For this reason, the customers have to pay a penalty. In order...
GENERATOR PROTECTION RELAY APPLICATION - AEL-GPRE
  • AEL-GPRE
Available
5.6.2.- SISTEM PERLINDUNGAN
AEL-GPRE
Aplikasi Rel Proteksi untuk Generator
2 www.edibon.com The Generator Protection Relay Application, "AEL-GPRE", has been designed by EDIBON for the training at both the theoretical and practical levels in the field of control and protection systems of high power generators.This...
POWER FLUX PROTECTION APPLICATION - AEL-AE9
  • AEL-AE9
Available
4.1.2.2.- RISIKO DAN PERLINDUNGAN LISTRIK
AEL-AE9
Aplikasi Relai Proteksi Aliran Daya
The Power Flux Protection Application, "AEL-AE9", has been designed to study the protection devices that deal with the resolution of network events involving reverse power flow and power factor alteration. This application allows the user to...
PROTECTION RELAYS TEST APPLICATION - ERP
  • ERP
Available
5.6.2.- SISTEM PERLINDUNGAN
ERP
Aplikasi Relay Proteksi
The Protection Relays Test Application, "ERP", is one of the most advanced and safe units in the market for studying the operation of protection relays used in real electrical substations. This unit provides students, professors, and researchers...
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI
AEL-SERIN/CA-1KW
Aplikasi Servo Motor Industri AC 1 Kw
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
FAULTS SIMULATION APPLICATION IN ELECTRICAL MOTORS - AEL-ESAM
  • AEL-ESAM
Available
4.3.2.1.- MOTOR LISTRIK AC DAN GENERATOR
AEL-ESAM
Aplikasi Simulasi Kerusakan pada Motor Listrik
The Faults Simulation Application in Electrical Motors, "AEL-ESAM", has been designed by EDIBON to simulate non-destructive faults in three-phase motors and application of diagnostic and localization techniques.This application allows simulating...
FAULT SIMULATION APPLICATION IN THREE PHASE TRANSFORMERS - AEL-ESAT
  • AEL-ESAT
Available
4.3.1.- APLIKASI TRANSFORMER
AEL-ESAT
Aplikasi Simulasi Kerusakan pada Transformator Tiga Fasa
The Fault Simulation Application in Three Phase Transformers, "AEL-ESAT", has been designed by EDIBON to simulate non-destructive faults in three-phase transformers and application of diagnostic and localization techniques.This application allows...
PHOTOVOTAIC SYSTEMS APPLICATION IN ISOLATED AND PARALLEL GRIDS - AEL-PHIP
  • AEL-PHIP
Available
5.3.1.- ENERGI SURYA FOTOVOLTAIK
AEL-PHIP
Aplikasi Sistem Fotovoltaik di Jaringan Terisolasi dan Paralel
The Photovoltaic Systems Application in Isolated and Parallel Grids, "AEL-PHIP", has been designed by EDIBON to study the operations carried out in photovoltaic power systems which operate isolated from the national energy grid (island operation)...
STAND-ALONE PHOTOVOLTAIC APPLICATION - AEL-SAPV
  • AEL-SAPV
Available
5.3.1.- ENERGI SURYA FOTOVOLTAIK
AEL-SAPV
Aplikasi Sistem Fotovoltaik Terisolasi dari Jaringan
The Stand-Alone Photovoltaic Application, "AEL-SAPV", has been designed by EDIBON to study the energy production obtained with photovoltaic panels.This application will provide the user with the knowledge and the essential skills about the...
ALTERNATORS STUDY APPLICATION - AEL-EEA
  • AEL-EEA
Available
4.3.2.1.- MOTOR LISTRIK AC DAN GENERATOR
AEL-EEA
Aplikasi Studi Alternator
The Alternator Study Application, "AEL-EEA", has been designed by EDIBON to study the behavior of three-phase synchronous generators with independent excitation.This application consists of a motor-generator group and a series of modules that...
DISTRIBUTION TRANSFORMER WITH MOTOR REGULATION APPLICATION - AEL-TI-02
  • AEL-TI-02
Available
5.1.3.2.- KEKUATAN TRANSMISI
AEL-TI-02
Aplikasi Transformator Distribusi dengan Regulasi Motor
The Distribution Transfomer with Motor Regulation Application, "AEL-TI-02", has been designed to study the distribution transformers and its importance in voltage regulation of the medium and low voltage stage of the electrical system. For that,...
SINGLE-PHASE TRANSFORMER APPLICATION - AEL-SPTT
  • AEL-SPTT
Available
4.3.1.- APLIKASI TRANSFORMER
AEL-SPTT
Aplikasi Transformator Satu Fasa
The Single-Phase Transformer Application, "AEL-SPTT", has been designed by EDIBON to allow the students learn how to carry out different single-phase transformer tests and how they work.With this application the user will be able to learn...
THREE-PHASE TRANSFORMER APPLICATION - AEL-TPTT
  • AEL-TPTT
Available
4.3.1.- APLIKASI TRANSFORMER
AEL-TPTT
Aplikasi Transformator Tiga Fasa
The Three-Phase Transformer Application, "AEL-TPTT", has been designed by EDIBON to allow the students learn how to carry out different three-phase transformer tests and how they work.With this application the user will study the basic operating...
POWER TRANSMISSION APPLICATION WITH SYNCHRONOUS GENERATOR - AEL-TI-07
  • AEL-TI-07
Available
5.1.3.1.- PEMBANGKIT LISTRIK
AEL-TI-07
Aplikasi Transmisi Daya dengan Generator Sinkron
Power Transmission Application with Synchronous Generator, "AEL-TI-07", has been designed to study power generation systems based onsynchronous generators. This application is designed to demonstrate the most important operations and maneuvers...
STAND-ALONE WIND TURBINE APPLICATION - AEL-SWT
  • AEL-SWT
Available
5.3.3.- ENERGI ANGIN
AEL-SWT
Aplikasi Turbin Angin dalam Jaringan Terisolasi
The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by EDIBON for the training at both the theoretical and practical levels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...
COMPUTER CONTROLLED TEACHING CURDLING TANK - CCDC
  • CCDC
Available
12.2.- PERAWATAN PRODUK PERHARIAN
CCDC
Bak Koagulasi Didaktik, Dikendalikan dari Komputer (PC)
The Computer Controlled Teaching Curdling Tank, "CCDC", is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet for the water of...
HYDROSTATICS BENCH & FLUID PROPERTIES - BHI
  • BHI
Available
8.3.- HIDROSTATIK
BHI
Banco Hidrostatik dan Sifat-sifat Fluida
The Hydrostatics Bench and Fluid Properties, "BHI", is a compact, mobile and independent unit.There is a water storage tank, to work in a closed system, at the bottom of the bench. The water is distributed by hand pumps from this tank to two upper...
AERODYNAMIC TESTING BENCH - ATBB
  • ATBB
Available
8.6.- AERODINAMIKA
ATBB
Bangku Uji Aerodinamis
The Aerodynamic Testing Bench, "ATBB", designed by EDIBON , has two main components: a radial fan with speed control and a working section where the different accessories for the tests are fixed.The radial blower impels the air through an air...
COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER AND TWO-CYLINDERS ENGINES, 11 KW - TBMC12
  • TBMC12
Available
7.2.3.- MESIN
TBMC12
Bangku Uji Motor 11 kW, Dikendalikan dari Komputer (PC)
The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...
COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3
  • TBMC3
Available
7.2.3.- MESIN
TBMC3
Bangku Uji Motor 2,2 kW, Dikendalikan dari Komputer (PC)
The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...
COMPUTER CONTROLLED TEST BENCH FOR FOUR-CYLINDERS ENGINES, 75 KW - TBMC75
  • TBMC75
Available
7.2.3.- MESIN
TBMC75
Bangku Uji Motor 75 kW, Dikendalikan dari Komputer (PC)
The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- POMPA
PBAC
Bangku Uji Pompa Aksial, Dikendalikan dari Komputer (PC)
The Computer Controlled Axial Pump Bench, "PBAC", has been designed by EDIBON to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve....
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PBEC
Available
8.7.1.- POMPA
PBEC
Bangku Uji Pompa Gigi, Dikendalikan dari Komputer (PC)
The Computer Controlled Gear Pump Bench, "PBEC", designed by EDIBON, is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...
SERIES/PARALLEL PUMPS BENCH - PBSPB
  • PBSPB
Available
8.7.1.- POMPA
PBSPB
Bangku Uji Pompa Seri/Paralel
The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...
POWER SUPPLY - FACO
Available
2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT DAN ACCESSORIES
FACO
Catu Daya
Aksesori dari LICOMBA
Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.
JET IMPACT ON SURFACES - FME01
  • FME01
Available
8.1.4.- HIDRODINAMIS
FME01
Dampak Jet pada Permukaan
The Jet Impact on Surfaces Unit, "FME01", designed by EDIBON, allows the study of the interaction between a moving fluid jet and different impact surfaces, providing a detailed understanding of fluid dynamics principles and their application in...
CAVITATION PHENOMENON DEMONSTRATION - FME19
  • FME19
Available
8.1.4.- HIDRODINAMIS
FME19
Demonstras Penomena Kavitasi
The Cavitation Phenomenon Demonstration unit, "FME19", designed by EDIBON is composed of a Venturi tube with a rectangular cross section, one of its sides being transparent, allowing a better visualization of the cavitation phenomenon.It includes...
Meminta informasi